SV Sound PB12-NSD Owner's Manual - Sv Sound

Other manuals for PB12-NSD: User Manual, Owner's Manual

Manual is about: Equipped Subwoofers

Page of 14

Download

Print this page

Bookmark us

SV Sound

Chapter 7-2

Specifications

Model Name:

PB12-NSD

Configuration:

Powered Box, front-firing 12” woofer

Design:

Vented, Variable Tune with Sealed Mode

Dimensions:

21” High x 18” Wide x 25” Deep

H x W x D

53 cm H. x 46 cm W. x 64 cm D.

Weight:

75 lbs (34 kg)

Voltage (fixed):

110~120V/60hz (US/Canada/South America)

220~240V/50hz (Europe, Russia, other)

Driver:

12” SVS designed/built “NSD” woofer with high

-excursion synthetic surround, polypropylene

cone with stamped basket, high-temp US voice

coil and integral cooling vents

Frequency Response:

(quasi-anechoic)

20Hz - 150Hz ± 3dB (typical in-room response

3-5Hz deeper)

Inputs/Outputs:

RCA and Speaker Level

Controls:

Gain, continuously variable phase, crossover

(defeatable), auto on, and high-pass filter

switches.

Power Handling:

325 watt RMS

Crossover:

High pass: 12dB/octave @ 80Hz

Variable low pass: 12dB/octave (40-120Hz)

Enclosure Material:

.75” - 1” Medium Density Fiber-board (MDF)

with internal CNC’d bracing, and charcoal

black textured finish

« ‹ Prev 8 9 10 11 12 13 14 Next › »

Summary of PB12-NSD

Page 1
O w n e r s ’ g u i d e contents: chapter 2 safety instructions chapter 3 svs welcome chapter 4 about your svs subwoofer chapter 5 general subwoofer features chapter 6 setup, integration, and calibration chapter 7 subwoofer specifications chapter 8 terms and conditions sv sound last update: 30 septe...
Page 2: Sv Sound
Important safety instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instr...
Page 3: Sv Sound
13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is re- quired when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects ...
Page 4: Sv Subwoofers
Page 4 sv subwoofers welcome! At svs, you can actually hear the tireless research and design efforts built in to our subwoofers and speak- ers. Years are spent developing any svs product — with work typically spanning from our ohio headquar- ters… to us west coast technology centers… and over to the...
Page 5: About Your Svs Subwoofer
About your svs subwoofer there maybe be other subwoofers that look like them, but virtually none work like them. Svs subwoofers are decidedly different in how they are designed, produced, sold, and the exceptionally high quality components we use. You could have spent much more on other brands and s...
Page 6: Sv Sound
Sv sound chapter 5-1 powered box basic common features . Svs subwoofer amps use the most durable and powerful designs possible. Get familiar with yours! Volume/gain use “gain” (in conjunction with your audio video re- ceiver (avr) subwoofer output level control) to achieve bass level cali- bration t...
Page 7: Sv Sound
Crossover feature switches. If you allow your dd/dts sur- round-sound receiver or processor to manage bass frequencies (again, highly recommended), this switch should be set to “disabled”, eliminating the effects of the “crossover frequency” knob and allowing your sub to reproduce just what is fed f...
Page 8: Sv Subwoofers
Setup, calibrating and integration what’s to know? Setup is easy! However, there are key steps which must be done carefully and correctly, read on: unpacking. Take a few moments to carefully unpack everything. Save the box and shipping materials, just in case you need to return the sub for any reaso...
Page 9: Sv Sound
More setup, calibrating and integration sv sound if you are running a pair of svs subwoofers (fig. 2), you will need to use an inexpensive “y” cable adapter (d.) from the “y” cable you can run a stan- dard 75 ohm rca signal cable (e.) to each sub, thus “splitting” the low fre- quency effects (lfe) a...
Page 10: Sv Sound
 also, is your subwoofer turned “on”? We don’t mean “is your sub- woofer amplifier on?” but rather, is your avr sending a bass sig- nal to your sub amp? This can only happen if you say “yes” (or “on”) to the “subwoofer” selection in the setup of your avr’s setup menu.  is your receiver connected t...
Page 11: Sv Sound
But what’s “too high”?? Tastes vary, and do movie soundtracks, but your svs subwoofer is capable of tremendous levels of low distortion, low frequency bass — far more than most subs in this size or price class. Take advantage of this, especially if you like action movies with lots of “.1” channel (l...
Page 12: Sv Sound
Sv sound chapter 7-1 specifications model name: pc12-nsd configuration: powered cylinder, 12” woofer design: vented dimensions: 32” high x 16” wide h x w x d 81 cm h. X 41 cm w. Weight: 50 lbs (23 kg) voltage (fixed): 110~120v/60hz (us/canada/south america) 220~240v/50hz (europe, russia, other) driv...
Page 13: Sv Sound
Sv sound chapter 7-2 specifications model name: pb12-nsd configuration: powered box, front-firing 12” woofer design: vented, variable tune with sealed mode dimensions: 21” high x 18” wide x 25” deep h x w x d 53 cm h. X 46 cm w. X 64 cm d. Weight: 75 lbs (34 kg) voltage (fixed): 110~120v/60hz (us/ca...
Page 14: Terms And Conditions
Terms and conditions terms and conditions: details are available on request, please contact your dealer for more. Note that these terms and conditions do not affect your statutory rights. Shipping: when you receive your new subwoofer, please check to en- sure there is no damage. If after unpacking y...