Sven AP-B250MV User Manual - Eng
ENG
3
Operation Manual
AP-B250MV
Control buttons
When interfacing with a telephone:
• in order to accept an incoming call press button c; to finish the call press button c
once again;
• in order to drop an incoming call press and hold button c (for ~2 sec.);
• when button c is double-pressed (approx. for 2 sec.) the last call will be dialed.
In player mode:
• when button c is pressed shortly – Playback / Pause.
Bluetooth technology
• Wireless data transfer via the Bluetooth protocol allows connecting headphones
without wiring to compatible devises. Maximum radius of action of data transfer is
10 m. Such obstacles as walls or other electronic devices can interfere with the
signal transfer.
Interface of headphones with a device
Attention! Make sure, that your PC supports Bluetooth technology.
Otherwise, connection of headphones to the computer via Bluetooth is im-
possible.
• In order to transmit signal via Bluetooth it is necessary by first to connect the de-
vice with a signal source (see connection diagram in Fig. 3). For this purpose turn
on the headphones and not releasing button b wait for the search mode – LED
indicator will alternate blue and red lighting.
• It is necessary to select the search mode of devices with Bluetooth on a signal
source (telephone, notebook, smartphone, etc.). “SVEN AP-B250MV” message will
be displayed on the screen with which it should be connected*.
• When connection is successful, there will be a short beep and the indication of the
search mode on headphones is over. If no device is connected, the headphones will
be turned off automatically in five minutes. In this case in order to interface devices,
the headphones should be turned on to the search mode once again**.
* You might have to enter “0000” code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search
mode activation is not obligatory. Choose only the item name and the “connect” command on
the source.
Fig. 3. Connection diagram
Phone
PC
Headphones