Sven combat Operation Manual - Eng
ENG
7
Operation Manual
combaT
• Switching between modes
The device can work in the analog and digital modes. The modes are switched with the MODE
buttonj. In the analog mode (red LED) all 4 axes and 12 buttons are accessible, in the digital mode
(LED is oԚ) 2 axes and 10 buttons are accessible.
Switch on the Macro mode with the button d to reprogram buttons or analog joysticks to other
functions. LED will be green or orange (if the analog mode is on). Then press a button, the function
of which should be changed, then press a button or buttons, to which functions the programmed
button should be changed, and press Macro again to quit the program mode. Press Macro and the
button, which has been programmed, to switch oԚ. Everything being reprogrammed will store in the
Gamepad memory, and when the device is oԚ the settings are not reset.
Fig. 7