Sven EASY SEE-149 LED Operation Manual - Eng
ENG
16
DVB-T/T2 TV Tuner with
Multimedia Player
Fig. 22
Fig. 23
OK
Confirm
USB>Record Option
Timeshift
One Button Recording
Default Recording Period
Time Shift Size
OFF
Maximum
5120MB
PAUSE
EXIT
Return
USB
OK
EXIT
Edit
Device
Page
My Recorder
USB/USB0/0
NO
Program Name
Status
001 20
МУЗ ТВ (07/02 12:16)
02/07/2014 08:44
001/001
02/07/2014
00:01’20”
20 МУЗ ТВ
12:16~12:18
Move
PAUSE
Exit
Select
Del
Record setting:
• You can change the standard record setting. Use navigation buttons ◄/► h to change record
time.
Time Shift Size:
• You can change the Time shift size. Use navigation buttons ◄/► h to change Time shift size.
Attention!
• USB interface supports most USB carriers, such as flash, hard disks, digital cameras, etc.
If an error occurs while device identification, it may be that the tuner software does not
support this device and it does not mean that the tuner is out of order.
• USB port supports 5 V voltage and 500 mА peak current. If you want to connect an exter-
nal hard disk to the tuner, it must have an external power supply.
• Sometimes file read rate from USB devices decreases, it can occur, for example, in at-
tempting to playback a high-capacity file. Read rate drop is not a malfunction of the tuner.
• Do not extract a USB device during playback of files. The producer does not bear res-
ponsibility for the data loss.
• Some files, extensions of which belong to the reproduced formats, sometimes cannot be
reproduced if they are coded in a special way.
PVR (record):
• Using this function, you can record a digital channel content to a USB device. Insert a USB device
into a proper port of the tuner to record a channel. The carrier must comply with the requirements
set forth above. It must have enough free space as well.
Quick record:
• Press REC button while watching a TV program. “Record starting, wait, please” message will be
displayed on the screen. When the tuner is in the record mode, a special record character and
recorded time will be displayed in the upper corner of the screen.
• Press REC button once again to stop recording.
Exit the record mode:
• Press EXIT button f once again on the remote control. A message to stop recording will be dis-
played on the screen. Press “Yes” bar to confirm the exit. The record character and total record time
will disappear from the screen.