Sven RX-425W User Manual - Important
of
8
Fig. 6. Fitting the receiver
into the mouse case
• After finishing work you can pull out the receiver f from the PC USB port
and insert it into the mouse (Fig. 6). When using the receiver again, pull it
out from the mouse and connect it to the PC USB port again.
• Do not place the receiver into a confined metal space (table drawer, box,
safe), as a metal screen does not transmit radio signals.
• If the battery runs down, the mouse works in jerks. It means that the
battery should be replaced with new one, as it is shown in Fig. 4.
This device meets the highest standards of energy conservation.
Important
ENG
Wireless Optical Mouse
6