1. DL manuals
  2. SVP
  3. TV Tuner
  4. HDR-106
  5. Manual

SVP HDR-106 Manual

Manual is about: MPEG-2/H.264 – 4:2:2 – 10 bits DVB-T2/T DIVERSITY 6 DVB-S2/S RECEIVER

Summary of HDR-106

  • Page 1

    Svp broadcast microwave hdr-106 mpeg-2/h.264 – 4:2:2 – 10 bits dvb-t2/t diversity 6 dvb-s2/s receiver manual v7.0 accessories included in this manual: down converter qpt pan & tilt positioner multisector antennas.

  • Page 2

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 contents chapter 1: introduction this first chapter provides a general description of the high definition hdr- 106 receiver equipment. Chapter 2: technical features this second part offers the receiver’s physi...

  • Page 3

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 dear customer, we would like to thank you for selecting this equipment and welcome you to the svp’s growing family of products. We are sure that the addition of this equipment will cause you a complete satisfa...

  • Page 4

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 this user’s guide provides indications and explanations about how to set up the hdr-106 receiver easily for the most common use cases. This document is intended to help first time users: - to find their way ar...

  • Page 5

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 1. The hdr-106 mpeg2/h.264-4:2:2 – 10 bits – dvb-t2/t/isdb-t with diversity 6 receiver is fully compatible with the dvb-t standard included in european standard etsi en300744, with dvb-t2 standard included in ...

  • Page 6

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 first aid in case of electric shock do not touch the victim with your bare hands until the circuit is broken. Switch off. If this is not possible, protect yourself with dry insulating material and pull the vic...

  • Page 7

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 8. In the case of severe facial injuries it may be necessary to do a manual method of artificial respiration (silvester-brosch or holger nielsen). Briefly, these methods apply compression to ribcage with the v...

  • Page 8

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 main index chapter 1: introduction ................................................................. 11 chapter 2: technical features ........................................................ 13 chapter 3: rece...

  • Page 9

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.2.6 decoder genlock screen ......................................... 66 3.7.2.2.7 decoder frame error screen .................................... 66 3.7.2.2.8 decoder frame without signal screen ...........

  • Page 10

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 6.4.1 snmp commands ............................................................ 138 6.4.2 mib ............................................................................... 139 chapter 7: block diagram ........

  • Page 11

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 b.2.3 qpt-90 ............................................................................... 175 index c: nx-820 user’s guide..................................................... 177 c.1 description .............

  • Page 12: Chapter 1: Introduction

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 chapter 1: introduction the new hdr-106 receiver performs dvb-t2, dvb-t, dvb-s2 (optional) and dvb-s (optional) demodulation. The latter enables compatibility with nearly all types of cofdm transmitters. The f...

  • Page 13

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 this new generation receiver has several outputs: 3g/hd/sd-sdi, hdmi, transport stream over ip and analogue video outputs. The hdr-106 receiver offers the received signal simultaneously in all the outputs. Sdi...

  • Page 14

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 chapter 2: technical features rf stage dvb-t2 and dvb-t: frequency range: 1,3 to 10,5 ghz tuning step: 100 khz input level range: -20 to -95 dbm -> dvb-t @ 8mhz -20 to -99dbm -> dvb-t2 @ 8mhz -20 to -101dbm ->...

  • Page 15

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 decoder: h.264: profiles: baseline, main, high high 422 support 10 bits level: 4.1 – 4.2 latency: 33 ms mpeg-2: profiles: 422p@hl, mp@hl, 422p@ml, mp@ml latency: 33 ms audio decoder: mpeg-1 layer i/ii max. Inp...

  • Page 16

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 data channels: data channel: user data or gps data rate: 1.200 to 57.600 bps asi and ip: outputs and inputs: asi transport stream (en50083-9) transport stream over ip (smtp2022/cop3) - fec max. Ts packets / ip...

  • Page 17

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 (it is the time that takes to the equipment to regain an image in case of a cut in the power supply) mechanical: size: 1 ru, 255 mm (10 inches) depth weight: 3 kg (6.6 lb) environmental: aeronautical: rtca / d...

  • Page 18

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 chapter 3: receiver operation and menus this section contains all the necessary information to operate, control and configure the hdr-106 receiver. 3.1 display to switch the equipment on and off, press on/off ...

  • Page 19

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.1.1 1 st main screen for the dvb-t2 in the table below, the function of each parameter is explained. These values are numbered in the order they appear in the main screen (the first one is the one allocated ...

  • Page 20

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 12 carriers (1k, 2k) 13 number of cuts occurred to the input rf signal: in case there is a cut in the rf received signal, the number of cuts counter will increase its value in 1. To reset and set to 0 this val...

  • Page 21

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.1.2 1 st main screen for the dvb-t in the table below, the function of each parameter is explained. These values are numbered in the order they appear in the main screen. Parameter nº function 1 received sta...

  • Page 22

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 13 number of cuts occurred to the input rf signal: in case there is a cut in the rf received signal, the number of cuts counter will increase its value in 1. To reset and set to 0 this value, press left button...

  • Page 23

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 in the table below, the function of each parameter is explained. These values are numbered in the order they appear in the main screen (the first one is the one allocated in the first line beginning from the l...

  • Page 24

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.1.4 1 st main screen for the ip input in the table below, the function of each parameter is explained. These values are numbered in the order they appear in the main screen (the first one is the one allocate...

  • Page 25

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.1.5 2 nd main screen (for the dvb-t2/t) in this second screen, the levels and the carrier to noise ratio values of six if inputs are shown. In order to see the parameters of the if inputs, press the up, down...

  • Page 26

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.1.7 4 th main screen (for the dvb-t2) in this fourth screen, it is displayed the level and the c/n value of the received signal which has the best values of these parameters. Figure 3.7 main screen 4 the fou...

  • Page 27

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.2 reception examples next, some reception examples and the image that appears in the monitor screen are shown. Example 1 (dvb-t) setup:  received signal standard: dvb-t  bitrate: 8.7 mbps  video codificat...

  • Page 28

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 example 2 (dvb-t2) setup:  received signal standard: dvb-t2  bitrate: 38.8 mbps  video codification: h.264  input video signal format: 576i  profile: 4:2:0  delay: standard delay  audio status: audio1 d...

  • Page 29

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.3 tft screen the hdr-106 receiver has a tft 2” screen which allows the user watching the received video signal throughout this screen. This tft screen receives the video signal from the composite video outpu...

  • Page 30

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.5 leds the hdr-106 receiver has 4 leds on its front panel that show the information detailed below. The on/off provides the following information:  if the led is off, the equipment is not being fed.  if th...

  • Page 31

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.6 front panel the hdr-106 receiver is configured following a menus structure on the display. The front panel has 7 buttons to enter and exit the equipment’s control menus and submenus and to navigate through...

  • Page 32

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.6.2 ok button this button is used to:  enter submenus and change parameters. So as to access to a submenu, the ok button must be pressed. Moreover, in the fields where the enter symbol appears, by pressing ...

  • Page 33

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.6.5 up and down button  the up and down arrow buttons allow navigation in the main menu and the rest of submenus. These buttons are selected to enter to a submenu or to change a parameter. Once selected, th...

  • Page 34

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7 menus using the menu of this receiver the user can change receiver’s parameters and configure them. When the receiver is firstly switched on, the main screen appears. There are four possible screens that s...

  • Page 35

    34 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 continued hdr-106_h.264 menu structure rx frequency lo frequency tuner if cable bandwidth demod monitor local ip config. Rx frequency lo frequency tuner bandwidth demod monitor adr fec port output delay tp ...

  • Page 36

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 continued continued channel 2 channel 1 did decoder genlock frame error biss-1 biss-e ca-biss ip output local ip config time to live protocol fec dest ip & port alarms monitor webserver & snmp temperature logb...

  • Page 37

    Hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 continued current version update firmware restore default unit miscellaneous speed units timeout reset s/n firmware keyboard beep night mode clock location labels alarm beep voip mac network mac quickset proto...

  • Page 38

    37 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.1 menu navigation this section contains a detailed description of each parameter that can be configured in the hdr-106 receiver via the menu. To enter the menu, press the cross button in case of being i...

  • Page 39

    38 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2 menu structure the following menu screen can be accessed by pressing the cross key from the main screen. Figure 3.19 setup menu input select: all the parameters related to the received signal/s can be...

  • Page 40

    39 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.1 input select menu by using the up, down arrow keys, select the input select optionand press the ok key. Five inputs can be selected: - dvb-t - dvb-t2 - dvb-s2/s (optional) - asi (optional) - ip 3.7....

  • Page 41

    40 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 line nº function 1 dvb-t  rx frequency: in this field, the frequency of the received signal must be set. So as to establish the frequency value first, press the ok button and then, with the up, down arrows...

  • Page 42

    41 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 5 dvb-t  if cable: in this field, it must be specified the type and the length of the cable used between the input and the down-converter. So as to select the type of the cable, first press the ok button. ...

  • Page 43

    42 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 next, the layout of the monitor parameters (constellation, fec, time guard, level of the received signal, mer, c/n and ber) is shown. Firstly, the user must introduce the i.F. Input to be monitored (from 1 ...

  • Page 44

    43 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.1.2 dvb-t2 figure 3.23 dvb-t2 input select menu dvbt2 rx frequency: 2.300,0 mhz dvbt2 bandwidth: 8mhz dvbt2 lo frequency: 1.840,0 mhz dvbt2 tuner: 1 enable > dvbt2 if cable: 1 lmr-400 l: 001 m > ...

  • Page 45

    44 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 line nº function 1 dvb-t2  rx frequency: in this field, the frequency of the received signal must be set. So as to establish the frequency value first, press the ok button and then, with the up, down arrow...

  • Page 46

    45 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 5 dvb-t2  if cable: in this field, it must be specified the type and the length of the cable used between the input and the down-converter. So as to select the type of the cable, first press the ok button....

  • Page 47

    46 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 next, it is shown the layout of the monitor parameters (level of the received signal, signal to noise ratio, constellation, fec, time guard, mod, spectrum and rotation). First, the user must introduce the i...

  • Page 48

    47 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.1.3 dvb s2/s (optional) figure 3.26 dvb s2/s input select menu dvbs2/s  input: lnb1 > dvbs2/s  satellite frequency: 11.000.000 khz dvbs2/s  lnb: disable > dvbs2/s  locked: no dvbs2/s  signal qual...

  • Page 49

    48 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 line nº function 1 dvb-s2/s  input: in this field, the desired lnb input must be set. So as to choose the lnb needed, press right and left buttons and select an option. (elegible parameter) the available o...

  • Page 50

    49 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0  ber pre-vit (reading parameter)  ber pos-vit (reading parameter)  ber pre-rs (reading parameter)  ber pre-ldpc (reading parameter)  ber post-ldpc (reading parameter)  ber post-bch (reading parameter)...

  • Page 51

    50 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 for the pilots, in this option if the pilot carriers are being sent or not is shown. 9 dvb-s2/s  symbol rate and spectrum inv in this field, the value of the symbol rate and the inverted spectrum are shown...

  • Page 52

    51 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.1.4 asi by using the right and left arrow keys, select the asi input option. Figure 3.27 asi input screen then press the cross button and these asi options will appear in the main screen: figure 3.28 ...

  • Page 53

    52 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.1.5 ip by using the right and left arrow keys, select the ip input option. Figure 3.31 ip input screen then press the cross button and these ip options will appear in the main screen: figure 3.32 main...

  • Page 54

    53 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 to configure the different parameters related to the ip input option, select ip input option and press the ok button. Figure 3.35 ip input select menu inpip local ip config inpip adr: unicast > inpip fec...

  • Page 55

    54 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 line nº function 1 inpip  local ip config: so as to configure the network parameters, press the ok button. (editable parameters) the available options are:  local: so as to establish the local ip address,...

  • Page 56

    55 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3 inpip  fec: to select if fec is enabled or disabled in the received signal press right, left buttons. (eligible parameter) the available options are:  enable col: row: (the ip forward error correction i...

  • Page 57

    56 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 9 inpip  packet size: this field shows the size in bytes (188 or 204 bytes) of the ip received packets. (reading parameter) the available values are:  channel is enabled  channel is disabled  channel is...

  • Page 58

    57 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.2 decoder menu by using the up and down arrow keys, select the decoder optionand press the ok key. Figure 3.36 decoder menu decoder encoding system: 420/s [h.264] decoder audio status: ch1:256kb ch2...

  • Page 59

    58 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.2.1 decoder mode screen in this field, the mode for the decoding process is selected. Use right, left arrows buttons so as to select the appropriate option. (eligible parameters). The available option...

  • Page 60

    59 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 pid config mode selecting the pid selection option and pressing the ok button, the user is able to configure the parameters shown below. Figure 3.40 decoder pid config mode screen line nº function 1 video p...

  • Page 61

    60 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 4 data pid: here the data packet identifier must be entered. So as to change its value first, press the ok button and then, with the up, down arrows select the desired number. So as to save the introduced v...

  • Page 62

    61 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.2.3 decoder encoding system screen in this field, the next parameters are displayed in the screen. Figure 3.42 decoder encoding system screen line nº function 1 profile: the profile of the received si...

  • Page 63

    62 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.2.4 decoder audio status screen in order to access to the decoder audio screen, the ok button must be pressed. The parameters that appear in this screen are: figure 3.43 decoder audio screen line nº f...

  • Page 64

    63 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.2.5 decoder data screen in this field, the sort of data that is going to be decoded must be selected. The available options are:  user screen if this option is selected, it is possible to configure t...

  • Page 65

    64 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0  gps screen below, it is explained the gps screen and the meanings of the parameters related to the gps. Once user has accessed to the gps screen, two options to choose will appear: transmitter gps informa...

  • Page 66

    65 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 2 tx position: in this option, different parameters are shown (reading parameters): number of satellites speed of the transmitter (kn) direction of the transmitter (degrees) height of the transmitter (m) 3 ...

  • Page 67

    66 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.2.6 decoder genlock screen this device has an external genlock reference input in order to lock all the video outputs to it. (reading parameter) figure 3.48 decoder genlock screen the available option...

  • Page 68

    67 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.2.8 decoder frame without signal screen in this option, if there is an error, the last image is frozen in the screen until the signal works again (elegible parameter). Figure 3.50 decoder frame freeze...

  • Page 69

    68 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.3 autotracking menu in this section it is explained how to configure the autotracking with different types of antenna. The possible options are:  parabolic  sector  omni parabolic antenna next, it ...

  • Page 70

    69 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 if the manual option is selected, then, by pressing the ok button the user can select manually the position of the parabolic antenna. So as to change the azimuth (h) position of the antenna, press the right...

  • Page 71

    70 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0  rhcp  lhcp  h. Offset the desired offset of the antenna can be selected pressing the up, down buttons. (editable parameter)  remote gps in this field, the source of the gps signal must be selected. (el...

  • Page 72

    71 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 when the auto option is selected, it means that the sector antenna is automatically selected. The selected sector is the one which is marked with the square brackets. If the ok button is selected in this op...

  • Page 73

    72 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.4 ca-biss menu by using the up, down arrow keys, select the ca-biss optionand press the ok key. Figure 3.61 ca-biss menu line nº function 1 mode: so as to choose the desired encryption, press the righ...

  • Page 74

    73 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 so as to introduce the key in the biss-1 option, follow these steps: 1. Choose biss-1 option in the mode field. 2. Go one field down (ca ssword) and press the ok button so as to be allowed to introduce the ...

  • Page 75

    74 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.5 ip output menu by using the up, down arrow keys, select the ip output option. This output can be enabled or disabled pressing the right and left buttons. Figure 3.62 ip output to configure the diffe...

  • Page 76

    75 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 line nº function 1 local ip config: in this field, different parameters related to the configuration of the local network can be set. The available parameters are:  local: ip address of the device which is...

  • Page 77

    76 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 4 tp per ip: in this field the number of transport stream packets per ip (from 1 to 7) can be configured. So as to select the desired value, press the right and left buttons. (eligible parameter) 5 protocol...

  • Page 78

    77 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.6 unit by using the up, down arrow keys, select the unit optionand press the ok key. Figure 3.64 unit menu unit webserver & snmp unit miscellaneous unit alarms unit monitor unit firmware unit vi...

  • Page 79

    78 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.6.1 unit video monitor screen in this option, the video monitor can be configured. Figure 3.65 video monitor menu in this field, the tft video screen can be enabled or disabled. So as to switch off th...

  • Page 80

    79 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 line nº function 1 audio volume: select the level of the audio output signal. The level range is from 0 to 15 where the higher one is the number 15 and the lower one is 0. (elegible parameter) 2 audio speak...

  • Page 81

    80 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.6.4 unit monitor screen in this field, several monitor parameters of the device are displayed. Figure 3.68 monitor menu in this screen several monitor parameters can be accessed: line nº function 1 te...

  • Page 82

    81 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.6.4.1 monitor logbook figure 3.69 monitor logbook menu in this option, different actions in the device occurred since the last time that the logbook was cleared are saved. The total number of logs tha...

  • Page 83

    82 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.6.5 unit webserver & snmp screen in this field, different parameters related to the configuration of the webserver are shown. Figure 3.71 webserver & snmp menu the available parameters are: line nº fu...

  • Page 84

    83 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3 gate: in this option, the address of the gateway must be written. So as to change the gateway address first press ok button and then, with the up and down keys select the desired number. So as to change f...

  • Page 85

    84 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.6.6 unit miscellaneous screen in this field, several parameters related to the mode of operation of the device can be configured. Misc keyboard beep: off > misc keyboard lock: off > misc night mode...

  • Page 86

    85 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure 3.72 miscellaneous menu the available options are: line nº function 1 keyboard beep: if this option is off, then, when the user clicks any key of the keyboard, there will be no sound. If the on optio...

  • Page 87

    86 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 4 alarm beep: if this option is enabled then a beep noise will sound each time that an alarm occurs. (eligible parameter) the available options are: enable disable 5 clock: in this field the date and the cu...

  • Page 88

    87 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 11 speed units: in this field, the desired parameter is selected to measure the speed (eligible parameter). There are three options available: knots km/h mph 12 timeout reset: in this field the time that th...

  • Page 89

    88 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3.7.2.6.7 unit firmware screen in this option, the firmware of the device can be updated with a usb device. The steps to update the device are explained below. This field shows three options: current versio...

  • Page 90

    89 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 in this section, the firmware of the device can be updated. Next, they are explained the necessary steps so as to make a successful update. 1) the latest firmware is allocated in the webpage of svp broadcas...

  • Page 91

    90 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 4) go to rx_firmware. Figure 3.76 updating firmware step 4 5) press the version of the receiver model needed (version of the equipment) so as to download the file. Go to firmware field and then press the cu...

  • Page 92

    91 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 6) once the firmware file has been downloaded, save it in a usb device. In the usb device, the only file that can be allocated inside it is the firmware file of the device to be updated. 7) with the equipme...

  • Page 93

    92 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure 3.80 updating process 3 figure 3.81 updating process 4 figure 3.82 updating process 5 reading file 100% checking file 80% reading file 100% checking file 100% flashing 1/5 30% update finished rebooti...

  • Page 94

    93 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 chapter 4: autotracking antenna (optional) in this section it is explained in what consists the autotracking antenna control and they are detailed the steps to follow so as to configure properly this option...

  • Page 95

    94 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 4.1 autotracking with panel switching 4.1.1 how does it work the autotracking with panel switching consists of an ams multisectorial switchable antenna (with up to 5 possible panels and one possible up-down...

  • Page 96

    95 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 4.1.2 configuration next, it is explained how to configure the autotracking with a sectorial antenna. The center of the first sector must be oriented to the north. This center of the first sector is marked ...

  • Page 97

    96 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 when the auto option is selected, it means that the sector antenna is automatically selected. The selected sector is the one which is marked with the square brackets. Ii. Manual figure 4.5 sector autotracki...

  • Page 98

    97 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 if the option selected is gps and the device is receiving signal but the gps data disappears, the device will be in a tracking mode automatically. It will stay two seconds in each sector until gps data is r...

  • Page 99

    98 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 4.2.2 configuration next, it is explained how to configure the autotracking with a parabolic antenna. The quickset positioner must be calibrated. This means that it must be straightened and oriented 0 degre...

  • Page 100

    99 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 ii. Manual figure 4.11 parabolic autotracking (manual) if the manual option is selected, then, by pressing the ok button the user can select manually the position of the parabolic antenna. So as to change t...

  • Page 101: Chapter 5: Gps

    100 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 chapter 5: gps 5.1 introduction the hdt-02 transmitter has a gps antenna input in order to give information to the device about the positioning data. Once the information is kept inside the device, it can ...

  • Page 102

    101 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 5.3 gps receiver screen so as to access to the gps screen, go to the decoder option in the menu. Once inside this option, go to the decoder.Data field and choose gps using left or right buttons. Press the ...

  • Page 103

    102 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 height of the transmitter: the height of the transmitter from ground is specified in this value. Date: the updated date is shown. Longitude of the transmitter: it specifies the longitude position of the tr...

  • Page 104

    103 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 above this paragraph a picture of this system is shown: figure 5.3 gps system example 1 picture hdt-02_h.264 transmitter with gps hdr-106 gps screen hdr-106 receiver e20º45.512´ 10k47º1mt 04/10/13 n60º73.9...

  • Page 105

    104 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 5.5 hyperterminal configuration so as to establish a communication between the hdr-106 and the computer throughout the serial port, please follow these instructions: 1- type a name for the connection and a...

  • Page 106

    105 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 3- in the com1 properties, select the same parameters as the one selected in the hdr-106 receiver:  bits per second: 9,600  data bits: 8  parity: none  stop bit: 1  flow control: none figure 5.6 com1 ...

  • Page 107

    106 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 chapter 6: web server / snmp 6.1 introduction this equipment can be controlled by the use of a pc connected at the rear panel ethernet connector , through the internet or a local network. The remote connec...

  • Page 108

    107 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 4. Select gate option and set the gateway. Select gat option and set the gateway address. So as to change the gateway address first press ok button and then, with the up, down keys select the desired numbe...

  • Page 109

    108 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 6.2 web page overview to access to the webserver, it is necessary to set the webserver ip in the web browser and press enter button. Then, the main menu will appear in the upper position of the screen. Onc...

  • Page 110

    109 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 demodulator - rx frequency: in this field, the frequency of the received signal must be set. (editable parameter) - lo frequency: in this field, the frequency of the local oscillator connected to the i.F. ...

  • Page 111

    110 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 - [tw] level: in this field, the level of the received signal, where w is the number of the demodulator (from 1 to 6 for diversity mode), is shown in dbm. (reading parameter) - [tw] snr: in this field, the...

  • Page 112

    111 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 6.2.2 dvb-t2 input figure 6.8 web server dvb-t2 input screen demodulator - rx frequency: in this field, the frequency of the received signal must be set. (editable parameter) - lo frequency: in this field,...

  • Page 113

    112 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 - bitrate: in this field the bitrate of the received signal is displayed. (reading parameter) - constellation: in this field the type of modulation of the received signal is displayed. The available option...

  • Page 114

    113 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 - [tw] level: in this field, the level of the received signal, where w is the number of the demodulator (from 1 to 6 for diversity mode), is shown in dbm. (reading parameter) - [tw] snr: in this field, the...

  • Page 115

    114 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 6.2.3 asi input figure 6.9 web server asi input screen in this screen it is shown if the asi signal is being received through the status field. If this field shows the locked word, it means that signal is ...

  • Page 116

    115 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 - fec: in this option the fec option can be enabled or disabled. In case the enable option is selected, as the ip forward error correction is composed by a number of fec columns and rows, it is shown the n...

  • Page 117

    116 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 - protocol: in this field the protocol used for the communication is displayed. Two protocols are possible: udp or rtp. (reading parameter) - pcr present: program clock reference. It indicates if pcr packe...

  • Page 118

    117 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 6.2.5 decoder figure 6.11 web server decoder screen - status: in this field, the status of the decoder is displayed. If the decoder is not decoding, then the message “not decoding” appears. If the decoder ...

  • Page 119

    118 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 - delay: this field shows the video delay of the received signal. The available options are standard, low delay and super low delay. In case the input video signal is coded in ultra low delay mode, the dev...

  • Page 120

    119 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 - [1] bitrate: this field displays the bitrate of the received audio 1 signal in kbps. (reading parameter) - [2] status: this field shows the status of the audio 2. If there is no audio in the audio 2 inpu...

  • Page 121

    120 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 - parity: in this field the parity of the data signal is configured. The available options are none, even and odd. (eligible parameter) - stop bits: in this field the number of stop bits of the data signal...

  • Page 122

    121 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 - data pid: in this field, the data packet identifier must be introduced. (editable parameter) - pmt pid: in this field, the program map table packet identifier must be introduced. (editable parameter) - p...

  • Page 123

    122 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 6.2.6 autotracking figure 6.12 web server autotracking screen so as to configure the gps parameters, gps option must be selected in the decoder screen, in the type of data field. The format of the gps coor...

  • Page 124

    123 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 n43º02.032’ w023º03.023’ receiver position - mode: in this field, the available option is manual. In this mode, the user must specify manually the parameters related to the position of the receiver. (readi...

  • Page 125

    124 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 - altitude: the height of the transmitter from ground in feets is specified in this value. (reading parameter) - speed: this field shows the speed of the transmitter in knot. (reading parameter) - directio...

  • Page 126

    125 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 - fold tilt the number of degrees that are needed to fold the antenna is displayed. (editable parameter) sectorial antenna configuration - elevation degree in this field, the elevation degree of the receiv...

  • Page 127

    126 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 - sectorial in this field, sectorial autotracking option is configured. This option allows the user to choose different types of situations for the sectorial autotracking system:  auto: it is the auto mod...

  • Page 128

    127 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 6.2.7 descrambling figure 6.13 web server descrambling screen - status: in this field, the status of the descrambling process is displayed. If the input signal is not encrypted, then the message not scramb...

  • Page 129

    128 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 6.2.8 tsoverip output figure 6.14 web server tsoverip output screen ip output (this option is available if the ip input is not selected) - destination address: in this option, the ip address of the device ...

  • Page 130

    129 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 - protocol: in this field the type of protocol used for the communication is selected. The type of protocol used for the communication can be rtp or udp. (eligible parameter) - time to live [0..255]: this ...

  • Page 131

    130 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 6.2.9 unit figure 6.15 web server unit screen.

  • Page 132

    131 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure 6.16 web server unit screen first of all, the status of the different leds available is presented. These leds provide specific information about the status of the receiver:  on/off: the led lights ...

  • Page 133

    132 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 - webserver subnet: in this field, the subnet address for the webserver connection can be configured. (editable parameter) - webserver gateway: in this field, the gateway address for the webserver connecti...

  • Page 134

    133 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 - speed units: the speed can be measured in knots, km/h or mph. (eligible parameter. - voltage: in this field, the power supply voltage of the device is shown. (reading parameter) - temperature: if ºc is s...

  • Page 135

    134 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 when editable parameters are being set in the web server and new values are being introduced, the text remains in red colour until the enter button is pressed. When the enter button is pressed, the new val...

  • Page 136

    135 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 monitor file in this file, the information related to the latitude, longitude and altitude of the transmitter and receiver, the decoding status and the level, mer and c/n of each signal is displayed. To ex...

  • Page 137

    136 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 second step: write the name and the extension of the file to dump the data. Third step: press the "save to file" button. If it is wanted to clear the captured data in one session, it is necessary to use th...

  • Page 138

    137 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 6.3 web page setup notes in order for the data to be refreshed correctly, you may need to change some settings on your browser. Please follow these instructions carefully. For google chrome: 1. Make click ...

  • Page 139

    138 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure 6.21 snmp management system the snmp agent used is mib-ii compliant. The svp mib (management information database) provides a standard representation of the snmp agent’s available information and wh...

  • Page 140

    139 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 6.4.2 mib the management information base of this device is shown below: hdr70_receiver-mib definitions ::= begin imports enterprises from rfc1155-smi object-type from rfc-1212 displaystring from rfc-1213;...

  • Page 141

    140 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 hdrstatusonoff object-type syntax integer{off(0), on(1)} access read-only status current description "unit status (on/off)" ::= {hdr-70 5} hdrstatusinput object-type syntax integer{off(0), on(1)} access re...

  • Page 142: Chapter 7: Block Diagram

    141 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 chapter 7: block diagram in this chapter, the block diagram of the hdr-106 receiver is explained. This diagram has several parts related to the hdr-106 internal performance which are shown in blocks with d...

  • Page 143

    142 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure 7.1 hdr-106 block diagram.

  • Page 144

    143 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 chapter 8: equipment installation 8.1 introduction this chapter provides important information for the receiver system installation such as connections available in the rear panel of the hdr-106 receiver a...

  • Page 145

    144 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure 8.2 back view of the hdr-106 receiver ground power a.C. Power d.C. Antenna autotracking web server & snmp usb input (firmware upgrade) audio 1 output audio 2 output gps/data local gps/data remote hd...

  • Page 146

    145 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 8.2.1 power supply in this section, technical features about the power supply connections available and the connectors needed are described. Ac power supply the receiver equipment can be powered by an ac s...

  • Page 147

    146 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 pin description 1 l 2 gnd 3 n table 8.2 ac power supply connector pinout connector needed nac3fca nac3mpa.

  • Page 148

    147 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 dc power supply the receiver equipment can be powered by a dc source from 11 to 36 v. The dc power supply is connected via a neutrik 4-pin male xlr connector with a safety clip to prevent accidental discon...

  • Page 149

    148 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 8.2.2 intermediate frequency intermediate frequency inputs i.F.1 … i.F.6 the connection between the receiver unit and the down-converter uses a coaxial cable, whose maximum length depends on the type of co...

  • Page 150

    149 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 8.2.3 dvb-asi transport stream dvb-asi transport stream input the hdr-106 receiver has a dvb-asi transport stream input, compatible with the en50083-9 standard, available on an insulated 75Ω bnc connector ...

  • Page 151

    150 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 8.2.4 video outputs the hdr-106 receiver includes one analogue composite video output, one hdmi output and two digital 3g-sdi/hd-sdi/sd-sdi video outputs. The output video signal on the receiver will be au...

  • Page 152

    151 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 8.2.5 genlock genlock input the hdr-106 receiver has an external genlock reference input in order to lock all video outputs to it. The connection is available on a 75Ω insulated bnc connector located on th...

  • Page 153

    152 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 8.2.6 transport stream over ip (optional) transport stream over ip input and output the hdr-106 receiver has an input that allows receiving and transporting video over ip. The connector is a utp cat 5e whi...

  • Page 154

    153 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 8.2.7 audio output the hdr-106 receiver has six possible audio outputs:  2 audio outputs to extract 2 stereo channels aes/ebu and 2 stereo or 4 mono analogue (line) signals where connections are made usin...

  • Page 155

    154 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 pinout of the cable connector (watched from the soldering side) cable connector needed xlr-3 left pin db-9 pin 1 7 2 3 3 8 table 8.16 xlr- 3 left to db-9 pinout xlr-3 right pin db-9 pin 1 5 2 4 3 9 table 8...

  • Page 156

    155 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 8.2.8 gps gps/data input in order to provide gps information about the receiver, the hdr-106 receiver incorporates a gps rs232 connector. The data to be obtained is the positioning of the receiver. Gps/dat...

  • Page 157

    156 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure 8.3 gps connector scheme.

  • Page 158

    157 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 gps/data output in order to provide gps information about the transmitter, the hdr-106 receiver incorporates a gps rs232 connector. The data to be obtained is: - transmitter positioning - transmitter direc...

  • Page 159

    158 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure 8.4 gps connector scheme.

  • Page 160

    159 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 8.2.9 autotracking (optional) the autotracking option can be used either with an antenna with polarity or with a multisector antenna. This can be selected in the menu. This is the connector used for autotr...

  • Page 161

    160 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 pin description d sector 1 e sector 2 f sector 3 g sector 4 h sector 5 j sector 6 table 8.24 autotracking connector pinout ( for an ams multisectorial switch antenna) 8.2.10 remote control the hdr-106 rece...

  • Page 162

    161 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 8.3 rack unit installation when the receiver is installed in a rack unit horizontally, guides should be used due to the weight of the equipment. Furthermore, the receiver has to be well chilled and therefo...

  • Page 163

    162 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 index a: dc-cofdm user’s guide important notes 1. The dc-cofdm down-converter has been designed to work with cofdm signals. It converts the received rf signal to uhf band. Excellent results in the signal q...

  • Page 164: A.1 Description

    163 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 a.1 description the dc-cofdm down-converter is suitable to work with cofdm digital links. It translates rf band signals to uhf band. Different down-converter models are available which can work from 1,3 to...

  • Page 165

    164 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 the maximum fix mast diameter is 60 mm. In the following figure, the down-converter is shown: figure a.1 down-converter.

  • Page 166

    165 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 a.2 technical specifications a.2.1 rf section this section shows the rf characteristics of the most used dc-cofdm models. For other frequency ranges, please contact svp. Item specifications frequency range...

  • Page 167

    166 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 a.2.4 physical characteristics item specifications size 137 x 126 x 30 mm (wxhxd) (w/o brackets) weight 0.855 kg max. Fix tube diameter 60 mm table a.4 physical characteristics a.2.5 environmental conditio...

  • Page 168: A.3 Block Diagram

    167 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 a.3 block diagram in this chapter, the block diagram of the dc down–converter is explained. This diagram has several parts related to the dc internal performance which are shown in blocks with different in...

  • Page 169

    168 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure a.2 dc block diagram.

  • Page 170

    169 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 index b: qpt user’s guide important notes 1. The qpt pan & tilt positioners have been designed to move parabolic antennas in autotracking systems of svp of higher quality. 2. The positioners are rugged and...

  • Page 171: B.1 Description

    170 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 b.1 description the qpt pan & tilt positioners have been designed to move parabolic antennas in autotracking systems of higher quality. The qpt positioners have been developed by moog which is a designer, ...

  • Page 172

    171 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 b.2 technical specifications b.2.1 qpt-20 standard performance item specifications load capacity 8 ib-ft (10.8 nm) maximum operating voltage range 24 vdc (±4 vdc) provided by the receiver pan-axis range 36...

  • Page 173

    172 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure b.2 qpt-20 pan & tilt positioner figure b.3 qpt-20 scheme figure b.4 qpt-20 connection scheme.

  • Page 174

    173 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 b.2.2 qpt-35 standard performance item specifications weight 6.5 kg load torque 35 ib-ft operating voltage 24 vdc (±2 vdc) pan-axis range continuous rotation pan-axis speed 0.005º-2.5º/sec tilt-axis range ...

  • Page 175

    174 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure b.5 qpt-35 pan & tilt positioner figure b.6 qpt-35 scheme figure b.7 qpt-35 connection scheme.

  • Page 176

    175 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 b.2.3 qpt-90 standard performance item specifications load capacity 90 ib-ft (10.8 nm) maximum operating voltage range 24 vdc (±4 vdc) provided by the receiver pan-axis range 360º continuous rotation (slip...

  • Page 177

    176 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure b.8 qpt-90 pan & tilt positioner figure b.9 qpt-90 scheme figure b.10 qpt-90 connection scheme.

  • Page 178

    177 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 index c: nx-820 user’s guide important notes 1. The nx-820 equipment have been designed to be used in autotracking systems when is required to transmit the position of the gps at long distances. 2. They ar...

  • Page 179: C.1 Description

    178 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 c.1 description the nx-820 equipment is a gps and voice transmission system for orders, with digital modulation and encrypted transmission. This system features a maximum capacity of forty ports permitting...

  • Page 180

    179 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 c.2 technical specifications general information item specifications frequency range type 400 – 470 mhz number of channels 260 channel spacing 6.25 / 12.5 khz operating voltage 13.2 vdc (10 – 36 vdc) opera...

  • Page 181

    180 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 index d: multisector antennas user’s guide important notes 1. The am and ams multisector antennas have been designed to be used in airborne links in diversity 6 mode. 2. These antennas are rugged and durab...

  • Page 182

    181 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 d.1 am-206 multisector antenna d.1.1 introduction the am-206 is a multisector antenna, which has been developed by svp broadcast microwave. This is a very compact, robust and easy to install solution for a...

  • Page 183

    182 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 d.1.2 technical specifications characteristics item specifications frequency standard: 2.070 – 2.400 mhz gain 5 sector panel antennas: 16.5 dbi 1 up-down antenna: 5 dbi elevation b/w 9º azimuth b/w 75º (x5...

  • Page 184

    183 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure d.3 am-206 antenna plane.

  • Page 185

    184 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 d.2 am-406l multisector antenna d.2.1 introduction the am-406l is a multisector antenna, which has been developed by svp broadcast microwave. This is a very compact, robust and easy to install solution for...

  • Page 186

    185 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 d.2.2 technical specifications characteristics item specifications frequency 4.4 – 5.1 ghz gain panel antenna: 16.5 dbi up-down antenna: 5 dbi elevation b/w 9º azimuth b/w 75º (x5) polarization 5 panel ant...

  • Page 187

    186 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure d.6 am-406l antenna schematic figure d.7 am-406l antenna distribution.

  • Page 188

    187 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 d.3 am-204 multisector antenna d.3.1 introduction the am-204 is a multisector antenna, which has been developed by svp broadcast microwave. This is a very compact, robust and easy to install solution for a...

  • Page 189

    188 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 d.3.2 technical specifications characteristics item specifications frequency 2.0 – 2.5 ghz 4.4 – 5 ghz 6.4 – 7.1 ghz gain 4 panel antennas: 12 dbi elevation b/w 18º azimuth b/w 110º (x4) diameter 221 - 120...

  • Page 190

    189 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure d.9 am-204 antenna schematic figure d.10 am-204 antenna distribution.

  • Page 191

    190 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 d.4 ams multisector switch antennas d.4.1 introduction the ams-206 and the ams-406 are multisector antennas, which have been developed by svp broadcast microwave. These are a very compact, robust and easy-...

  • Page 192

    191 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure d.14 ams-406 antenna d.4.2 technical specifications characteristics item specifications frequency ams-206: 2.070 – 2.400 mhz ams-406: 4.4 – 5.1 ghz gain 5 sector panel antennas: 16.5 dbi 1 up-down a...

  • Page 193

    192 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure d.12 ams-206 antenna figure d.15 ams-406 antenna.

  • Page 194

    193 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure d.13 ams-206 antenna schematic.

  • Page 195

    194 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure d.16 ams-406 antenna schematic these are the pins used for the control of the polarity of the ams antennas : pin description a vertical b lhcp c ground d not used e rhcp f horizontal table d.4 ams a...

  • Page 196: E.1 Introduction

    195 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 index e: video over ip monitoring on a pc e.1 introduction this section provides information about how to display the ip video of the hdr-106 receiver on the computer’s or laptop’s screen and how to record...

  • Page 197

    196 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 step 2 once the vlc has been downloaded, the hdr-106 receiver must be configured as it is shown below: select the asi input: figure e.2 type of input selection go to the ip output option of the main menu t...

  • Page 198

    197 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 purpose is the video over ip output, so the ethernet cable must be connected to it. It is very important to verify that the selected destination ip address is different from the ip address of the webserver...

  • Page 199

    198 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure e.6 open network stream step 5 then, go to network section and enter the network url as it is shown in the figure below. The network url has different parts: udp://@:5678  protocol: the type of pro...

  • Page 200

    199 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 protocol: type of protocol selected for the communication..

  • Page 201

    200 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 – dvb-s2/s receiver manual 7.0 figure e.8 connection diagram.

  • Page 202

    201 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 receiver manual v7.0 e.2.2 vlc as a recorder there are several steps that have to be carried out in order to record a video using vlc media player. Step 1 start vlc media player on the pc. This picture will appear in the screen. Figure ...

  • Page 203

    202 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 receiver manual v7.0 the buttons in red will be added to the main screen: figure e.11 vlc media player advanced controls buttons step 3 press play button to play the desired video and select a file from your computer pressing add button...

  • Page 204

    203 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 receiver manual v7.0 step 4 figure e.13 open media once a file has been selected, press play option and the video will be displayed in the vlc media player. Step 5 press record button to start recording and then press record button agai...

  • Page 205

    204 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 receiver manual v7.0 glossary aes/ebu audio engineering society/european broadcasting union am multisectorial antenna apsk amplitude and phase-shift keying or asymmetric phase-shift keying (apsk) asi asynchronous serial interface bnc ba...

  • Page 206

    205 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 receiver manual v7.0 fft fast fourier transform gps global positioning system hd high definition hdmi high-definition multimedia interface hdr high definition receiver hdt high definition transmitter if intermediate frequency ig interva...

  • Page 207

    206 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 receiver manual v7.0 pal phase alternating line pll phase locked loop pid packet identification qam quadrature amplitude modulation qpsk quadrature phase-shift keying rf radiofrequency rtc remote control sd standard delay sdi serial dig...

  • Page 208

    207 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 receiver manual v7.0

  • Page 209

    208 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 receiver manual v7.0

  • Page 210

    209 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 receiver manual v7.0

  • Page 211

    210 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 receiver manual v7.0 notes.

  • Page 212: Final Note

    211 hdr-106 mpeg2/h264 – 4:2:2 – 10 bits – dvb-t2/t diversity 6 receiver manual v7.0 final note svp broadcast microwave s.L. Is constantly striving to improve all of its products. Therefore, we ask you to understand that modifications may occur in designs, equipment and technology. Consequently, no ...

  • Page 213

    Svp broadcast microwave reserves the right to make changes to this manual and to the equipment without prior notice. Svp broadcast microwave c/zubiaurre 7 bajo 48215 iurreta vizcaya – spain tel: (+34) 94620 3722 info@svpbm.Com www.Svpbm.Com.