Summary of PB-2000
Page 1
Owner’s manual pb-2000 sb-2000 powered subwoofers.
Page 2
Thank you, and congratulations on purchasing your new svs subwoofer! Prepare to be pleasantly shocked at what an svs subwoofer will bring to your home music and theater system – we guarantee you a thrilling audio experience!Svs subwoofers deliver bass so accurate, detailed, clean and dynamic - you'l...
Page 3
Table of contents important safety instructions 3 placement options 4 amplifier features & controls 5 amplifier diagram 5 features and controls 6 power and signal connections 8 a/v receiver (avr)/processor (pro) connection 8 multi-channel/stereo - line level connection 9 features & specifications 10...
Page 4
Important safety instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instr...
Page 5
Placement options if possible, place the subwoofer near the front stage, for best blending with the front and center loudspeaker channels. Corner placement will excite all room modes and will reduce the chances for encountering a null (an acoustic cancellation in the bass response) at the listening ...
Page 6
The amplifier in your svs subwoofer has simple and straightforward connec- tivity and control options that make integrating the subwoofer into the listening environment an easy task. Amplifier features & controls 1 2 3 4 5 7 6 8 9 5.
Page 7
Volume control this control affects how loud the subwoofer plays. For connection to an a/v receiver, it should normally be set to 10 o’clock to 12 o’clock before running auto-set-up. For 2-channel applications, it should be adjusted to match the output level of the loudspeakers. Phase control this c...
Page 8
Line level inputs these inputs are used for line level connections to the subwoofer. For a single mono connection to an a/v receiver, use the r/lfe input. For 2-channel applications, use both the l and r inputs. Line level outputs these outputs are used in 2-channel applications to high pass the sig...
Page 9
Power & signal connections before making any power connections or signal (line level or speaker level) connections, please make sure the subwoofer power switch is turned off. Connect the subwoofer power cord to the subwoofer amplifier and to an ac outlet. Using convenience outlets located on some av...
Page 10
Multi-channel/stereo applications - line level connection this connection method is for multi-channel/stereo applications where the pre/pro has l/r line level outputs. • using high quality and shielded rca cables, connect the l/r line level outputs from the pre/pro to the l/r line level inputs on th...
Page 11
Features & specifications pb-2000 • frequency response: 18-150 hz ± 3 db (2-meter ground plane, quasi-anechoic) • dimensions (hxwxd): 20.5" x 17.3" x 22", 52 x 44 x 56 cm. • weight: 65.6 lbs., 29.8 kgs. • piano gloss black & premium black ash finish • front-firing svs 12" high-performance driver. • ...
Page 12
Warranty cleaning & cabinet care your svs subwoofer may be gently cleaned as follows: • use a dry microfiber duster to remove any loose surface dust. • use a water-damp microfiber cloth to remove fingerprints, smudges and other contaminants. Wipe in one direction only, with the grain. • follow any d...
Page 13
................................................................................................................................................ ................................................................................................................................................ .............
Page 14
Svs 6420 belmont ave. Girard, ohio 44420 united states (877) 626-5623 www.Svsound.Com.