SVT SVT-MF4 Outdoor Station E User Manual - page 16
-14-
8.How to set up the user codes
SVT-MF4 Outdoor Station G
require
s the SVT Remote
control for programming.
SVT REMOTE CONTROL works as a remote access
control.
It is required to program the SVT-4 Outdoor
Station G settings as registering and deleting
fingerprints, unlocking time and fingerprint security level.
SVT REMOTE CONTROL
Use two AAA alkaline batteries
Sensor
working distance: +/- 20cm
Modify administrator code
Enter the setting mode
Input the admin default code twice (1234+1234), the yellow LED will
be on. It is in the setting mode.
The default code is: 1234
In the setting mode:
Press * 3 (Yellow light blinks), and then enter a new administrator
code(XXXX) twice. If Bi- is heard, it means the operation is
successful.
Press # to exit the setting mode.
Notice: In case forget the admin code, power on first, then press #
within 3 seconds. If Bi is heard, it means admin code is
restored as default setting successfully.