SW-Stahl S3202 Instruction Manual - page 10
SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
www.swstahl.de
Leverkuser Straße 65
Fax +49 (0) 2191 / 46438-40
D-42897 Remscheid
E-Mail: info@swstahl.de
SPECIFICATIONS
Model: S3202
- 10 -
Lubrication
All of the bearings in this tool are lubricated
with a sufficient amount of high grade lubricant
for use under normal conditions before leaving
the factory. Regular addition or replacement of
the lubricating grease is not necessary.
However, on occasions when new or more
lubricant is needed, take the tool to a qualified
technician to do the job.
NOTE: Do not use oil as a grease substitute.
It will leak and degrade the performance of
this product.
ACCESSORIES
All accessories designed for this tool is
included with this product. Storage spaces for
sockets and extension bar are provided in the
carrying case for your convenience. Sockets
and extension bar can be obtained through
your local retailers. If the retailer does not
have the parts you need, simply contact the
authorized dealers for instruction on how to
order. Be sure to have ready the model
number of the product.
WARRANTY
This product carries a one-year warranty. We will
repair, without charge, any defects due to faulty
material or workmanship. Before you send back
the product please first call your dealer or the local
service center.
Experience has shown that over 90% of the
problems can be resolved over the phone; saving
much time and money for both parties. If a return
is necessary, simply return 1. only the part in
question; 2. copy of original sales receipt; and 3.
freight prepaid to an authorized warranty center.
This warranty does not apply to
- Accessories
- damage caused where repairs have been made
or attempted by others
- damage due to abuse, misuse, neglect, normal
wear and tear, alteration or modification
- products used as a rental unit
In no event shall the manufacture be liable for any
incidental or consequential damages.
Voltage:
Square Drive:
No-load Speed:
Impact per minute:
Max Torque:
Tool Weight:
(without battery)
Battery Weight:
(Ni-MH/ 2.0Ah)
(Li-ion/ 3.0Ah)
Length:
Charge Time:
Charger accepted:
14.4 VDC
9.5 mm (3/8“)
0 ~ 2,300 rpm
0 ~ 3,000 bpm
160 ft-lbs (217 N-m)
4.3 lbs (1.95 kgs)
1.9 lbs (0.85 kgs)
1.3 lbs (0.6 kgs
173 mm (6.8“)
approx. 60 mins
Ni-MH/ Li-ion