SWAGTRON SWAGDRONE 4-UP Quick Start Manual - page 9
SWAGTRON
TM
SWAGdRONe
TM
4-UP Racing Quadcopter Goggle Quick Start Guide
9
8.0 Band & Channel Table
This equipment comes with 5 bands and 40 channels for option. Please select and use the
channel according to your usage needs.
9.0 Receiving 5.8 Transmission
* Images can be received only when the 5.8G receiving channel is consistent
with 5.8G transmitting channel.
* Refer to Section 8 to check 5.8G receiving channel info.
* When the 4-UP’s screen flashes “Batt: 7.2V”, recharge it.
1. Use the Power Switch to turn the 4-UP on.
2. Long-press the
CF Key for 3~5 seconds
then press
Receiver Module Button to
turn on the receiver module. The 4-UP
will automatically search for channels
transmitting 5.8G images. If the search is
unsuccessful, try again or move to step 3.
3. Quick-press the
CF Key, use the Channel
Selection Buttons to manually select the
appropriate 5.8G receiving channel, and
then press the
Receiver Module Button to
turn the module on.
5.8G Antenna A
5.8G Antenna B
5V Power Cable