SWAGTRON SwagRoller User Manual - page 13
9
SWAGTRON SwagRoller Self Balancing Unicycle
ENGLISH
• Overvoltage
• Temperature increases
• Overcharging of the battery
• Overcurrent and short circuit protection
3.2 Charging Your SwagRoller™
Step 1.
Locate the charging port and open the cap.
Step 2.
Plug the charging adapter into a grounded wall outlet then
plug it into the charging port. The SwagRoller™ will turn on and
blink as it charges.
Step 3.
Allow at least 3 hours for a full charge. When the SwagRoller™
is fully charged, its lights will stop blinking.
Step 4.
Once the SwagRoller™ is fully charged, cover the charging port
with its cap to prevent water or debris from entering.
•
Fully charge the battery before your first use, this may take up to 3 hours
•
When not in active use, please charge at least once a month to maintain optimal battery
levels
•
Perform periodic visual inspection of the charging ports and charging adapter
•
When the battery is fully charged, please STOP CHARGING and unplug the unit
•
Keep your charging environment clean and dry at all times.
•
If the charging port is damp or has any liquid on it, do not charge your SwagRoller™
•
In order for the battery to operate at maximum efficiency, avoid charging your
SwagRoller™ in extremely hot or extremely cold environments
•
Use only the battery and charging adapter provided to you by SWAGTRON
™, use of third
party products may compromise the battery and damage the unicycle. If a replacement
is needed, please contact SWAGTRON
™ directly.
DO NOT charge the battery in the following cases:
•
There is excessive odor or heat
Charging Port