Swagway X1 User Manual - Chapterv Lear

ChapterV Lear

ning touseit

This User's Manual includes instructions and notes

; the operator must read it carefully and follow these

instructions. It is very important for you to know all these rules. 

5.1  Operating Steps 

Step 1 : Press the power switch to turn on the Swagway. 

Step 2: 

Get ready to drive. First, step on one pedal to trigger the foot-switch.  The system will enter

 self-balancing mode. T hen step on with your other foot. 

Step 3: Stand upright but relaxed.  Do not make any sudden or jerky movements.  Shift your weight forward or

back to control the Swagway. 

[) NOTE: 

If the Swagway doesn't self-balance when you trigger the foot-switch, the warning LED will light.  

Do 

not operate the Swagway.  

Wait a few minutes and try again.  If you are on a slope, move the Swagway

to flat ground.  If this continues, please contact technical support.

  DO NOT OPERATE!  

-09-

Step 4: Shift your 

weight to turn.  Putting more weight on your right foot turns left.  Putting more

weight on your left foot turns right.

Step 5:  Get off. Before you get off, make sure that the S

wagway is 

stopped, then step off one 

c

            foot at a time.  Please be careful.