Bestell nr. / order no. 9103 – 0521 de / uk betriebsanleitung user manual phonomodul / phono module e-series 1000 phe mm phe mc.
2.
3 seite / page deutsch ........................................................ 4 english ....................................................... 13.
4 willkommen. Wir freuen uns, dass sie sich für ein -produkt entschieden haben. Mit dem high-end phono-vorverstärkermodul phe mm / mc für geräte der e-serie (1000), haben sie eine hochwertige hifi-komponente der spitzenklasse erworben, bei dessen konzeption und entwicklung den wünschen des anspruch...
5 inhaltsverzeichnis installation und einstellung wichtige hinweise ................................................................................................... 6 allgemeines ............................................................................................................ 7 betrieb...
6 wichtige hinweise einbau / ausbau achtung! Der ein- bzw. Ausbau des phonomoduls darf nur durch oder eine autorisierte fachwerkstatt erfolgen. Die installation ist in der service-note „s0127_phe_mm_mc_installation_e1000“ im detail beschrieben..
7 allgemeines einstellungen von entscheidender bedeutung für die klangqualität eines tonabnehmersystems ist die genaue anpassung. Deshalb ist das phonomodul so konzipiert, dass es durch codierschalter perfekt an alle gängigen tonabnehmersysteme angepasst werden kann. Mit hilfe eines kleinen schraube...
8 einstellmöglichkeiten am phono-modul mm schalter- positionen 1l 1r 2l 2r einstellen der eingangs- empfindlichkeit (gain) mit den codier-schaltern "1" wird die gewünschte eingangs- empfindlichkeit für den linken (1l) und rechten kanal (1r) gemäß tabelle 1 eingestellt. Die benötigten daten entnehmen...
9 einstellen der eingangs- kapazität (impedance) die einstellung erfolgt durch die codier-schalter "2" für den linken (2l) und rechten (2r) kanal. Die benötigten daten entnehmen sie den herstellerangaben des tonabnehmersystems. Wählen sie den wert, der den herstellerangaben am nächsten liegt. Beacht...
10 einstellmöglichkeiten am phono-modul mc schalter- positionen 1l 1r 2l 2r einstellen der eingangs- empfindlichkeit (gain) mit den codier-schaltern "1" wird die gewünschte ein- gangsempfindlichkeit für den linken (1l) und rechten kanal (1r) gemäß tabelle 3 eingestellt. Die benötigten daten entnehme...
11 einstellen der eingangs- impedanz (impedance) die einstellung erfolgt durch die codier-schalter "2" für den linken (2l) und rechten (2r) kanal. Die benötigten daten entnehmen sie den herstellerangaben des tonabnehmersystems. Wählen sie den wert, der den herstellerangaben am nächsten liegt. Es müs...
12 betriebsstörungen viele betriebsstörungen haben eine einfache ursache, die sich leicht beheben lässt. Im folgenden abschnitt sind einige mögliche störungen sowie maßnahmen zu deren behebung aufgeführt. Sollte sich eine aufgetretene störung durch diese hinweise nicht beheben lassen, so wenden sie ...
13 english.
14 welcome . We are delighted that you have decided to purchase a product. With the phono-module phe mm / mc for your e-series (1000) device you have acquired a top-quality piece of equipment which has been designed and developed with the wishes of discerning listeners as absolute top priority. Thi...
15 contents installation and adjustment safety notes ............................................................................................................ 16 settings ................................................................................................................... 17 operati...
16 safety notes caution installation and de-installation of the phono preamplifier module must be carried out by or one of our authorized dealers. The installation procedure is described in detail in service note “s0127_phe_mm_mc_installation_e1000“..
17 settings adjustments accurate matching is crucially important to the sound quality produced by a pick-up system. For this reason the phono module features a set of miniature switches which enable the user to adjust it perfectly to suit all current pick-up systems. The individua l switches can be ...
18 adjustment facilities on the phono module mm switch positions 1l 1r 2l 2r setting the input sensitivity (gain) miniature switches „1“ are used to set the desired input sensitivity for the left (1l) and right (1r) channels as shown in table 1. The information you need for this will be included in ...
19 setting the input capacitance (impedance) miniature switches „2“ are used to set the desired input capacitance for the left (2l) and right (2r) channels. The information you need for this will be included in the manufacturer’s specification for the pick-up system you intend to use. Select the val...
20 adjustment facilities on the phono module mc switch positions 1l 1r 2l 2r setting the input sensitivity (gain) miniature switches „1“ are used to set the desired input sensitivity for the left (1l) and right (1r) channels as shown in table 3. The info rmation you need for this will be included in...
21 setting the input impedance (impedance) miniature switches „2“ are used to set the desired input impedance for the left (2l) and right (2r) channels. Th e information you need for this will be included in the manufacturer’s specification for the pick-up system you intend to use. Select the value ...
22 troubleshooting many problems have a simple cause and a correspondingly simple solution. The following section describes a few difficulties you may encounter, and the measures you need to take to cure them. If you find it impossible to solve a problem with the help of these notes please disconnec...
23 approval and conformity with ec directives in its original condition the unit meets all currently valid european regulations. It is approved for use as stipulated within the ec. By attaching the ce symbol to the unit declares its conformity with the ec directives 2006/95/ec, 2004/108/ec and 200...
24 anhang / appendix gehäusedeckel entfernen / open the top cover um nachträglich einstellungen am phonomodul vorzunehmen, ist es erforderlich den gehäusedeckel des r 1000 e zu entfernen. Abb. 2 zeigt die position des eingebauten moduls. Bitte beachten sie hierzu folgende punkte. Das gehäuse darf nu...
25 abb. 2 / fig. 2.
26 anschluss-schema / wiring diagram r 1000 e.
27 technische daten / specification eingangsempfindlichkeit (für ausgangspegel 800 mveff): input sensitivity (for 800 mveff output level): 100 μv ...2000 μv (mc)* 1 mv ... 10 mv (mm)* eingangsimpedanz (mc): input impedance (mc): Ω ... 650 Ω* eingangskapazität (mm): input capacitance (mm): frequenzga...
elektroakustik gmbh & co. Kg herford deutschland * germany.