V 1.0 bestellnr. / order no. 9103-0352 b betriebsanleitung user manual p 10
2.
Seite / page deutsch ............................................................................................... 4 english ................................................................................................ 24 anhang / appendix a: anschlussbilder .......................................
Willkommen. Wir freuen uns, dass sie sich für ein -produkt entschieden haben. Mit ihrem neuen b röhrenvorverstärker p10 haben sie ein hifi-gerät der spitzenklasse erworben, bei dessen konzeption und entwicklung den wünschen des audio- philen musikliebhabers oberste priorität eingeräumt wurde. Im ze...
Inhaltsverzeichnis seite bedienung bedienelemente an der frontseite ....................................................................................... 6 betriebsarten- und quellenwahl ........................................................................................ 6 programme..............
Bedienelemente an der frontseite 1 1 1 1 hauptschalter mit dem hauptschalter wird die betriebsart (off, stby, heat, hv), die hörquelle oder das programm (s, p) ge- wählt. Der schalter kann von hand nach links und rechts gedreht werden. Bei fernbedienung wird der schalter motorisch in die gewählte po...
Programme Über die stellungen s (special) und p (program) können sonderfunktionen erreicht werden, die im normalen betrieb nicht benötigt werden. Die bedienung der ent- sprechenden menüs kann daher ausschließlich mit den tastern / / an der gerätefront er- folgen. Die taster haben dabei fol...
Tipptaster an der gerätefront 2 2 2 2 / ein langer druck schaltet die aufnahmeausgänge des p10 ein. Das symbol leuchtet, wenn die aufnahme- ausgänge eingeschaltet sind. Es kann nun über die recorder-out-buchsen das gerade laufende programm aufgenommen werden. Kurzes antippen des -tasters (monit...
9 9 9 9 display der p10 verfügt über ein display, das über den betriebs- zustand des gerätes informiert. Außerdem können auf dem display zusatzinformationen dargestellt werden. Die bedeutung der einzelnen leuchtsymbole ist in der unten stehenden tabelle zusammengefasst. Symbol funktion a hinterbandk...
Fernbedienung dem p10 liegt als zubehör die fernbedienung f10 bei. Mit dieser fernbedienung können alle wesentlichen funktionen des p10 bedient werden. Ferner sind mit der fernbedienung f10 alle quellgeräte fernbedienbar, sofern diese über einen r link steueranschluss verfügen. Die folgende tabell...
Schutzschaltung der p10 ist mit einer mikroprozessor-gesteuerten schutz- schaltung ausgestattet, die sämtliche geräteteile wäh- rend der gesamten betriebszeit überwacht. Die schutzschaltung sorgt dafür, dass die röhren schonend angeheizt werden und sie verlängert so die lebensdauer der röhren. Da rö...
Sicherheitshinweise zu ihrer eigenen sicherheit sollten sie bitte unbedingt diese betriebsanleitung vollständig lesen und insbe- sondere die aufstellungs-, betriebs- und sicherheitshin- weise genau befolgen. Das gerät ist so aufzustellen, dass eine berührung sämt- licher geräteanschlüsse (insbesonde...
Bestimmungsgemäßer gebrauch das gerät ist ausschließlich zur ton- und/oder bild- wiedergabe im heimbereich in trockenen räumen unter berücksichtigung aller in dieser anleitung gemachten an- gaben bestimmt. Bei allen anderen einsatzzwecken, insbesondere in medizinischen oder sicherheitsrelevanten ber...
Anschlusselemente (rückseite) 1 1 1 1 aux 2 - eingangsbuchse universeller vorverstärker-eingang. 2 2 2 2 aux 1 - eingangsbuchse universeller vorverstärker-eingang. 3 3 3 3 gnd hier wird das massekabel der quellgeräte angeklemmt, um brummeffekte zu vermeiden (siehe auch 'bedienelemente an der frontse...
Netzsicherung ein auswechseln der sicherung darf nur durch einen fachmann erfolgen. Es dürfen nur sicherungen verwendet werden, deren bezeichnung exakt mit dem geräteaufdruck übereinstimmt! Netzeingang / netzschalter diese buchse dient dem netzanschluss und beinhaltet den hauptnetzschalter. Mit dem ...
Aufstellung, verkabelung, inbetriebnahme auspacken packen sie den verstärker vorsichtig aus und heben sie die originalverpackung sorgfältig auf. Der karton und das verpackungsmaterial sind speziell für dieses gerät konzi- piert und bei späteren transporten ein sicherer behälter. War das gerät größer...
Anschluss das anschlussschema des gerätes ist auf den an- schlussbildern im anhang dargestellt. Verlegen sie netz- oder lautsprecherkabel sowie die fernbedienungs-kabel möglichst entfernt von ton- und antennenleitungen und keinesfalls über oder unter dem gerät. Hinweise zum anschluss: • stecken sie ...
Glossar aux universeller vorverstärker-eingang (aux engl. Auxiliary input) zum anschluss hochpegeliger signalquellen (d. H. Signalquellen mit einem ausgangspegel zwischen 0,25 v und 4 v). Balance die pegelbalance zwischen rechtem und linkem kanal (veränderung der stereomitte), z. B. Bei unterschiedl...
Symmetrische ausgänge (xlr) die technik der symmetrischen verbindung stammt aus der studiotechnik, wo es auf höchste qualität und stör- sicherheit ankommt. Das prinzip beruht darauf, dass nicht nur ein signal, sondern zwei spiegelbildliche (invertierte) signale übertragen werden. Im empfangenden ger...
Betriebsstörungen viele betriebsstörungen haben eine einfache ursache, die sich leicht beheben lässt. Im folgenden abschnitt sind einige mögliche störungen sowie maßnahmen zu deren behebung aufgeführt. Sollte sich eine aufgetretene stö- rung durch diese hinweise nicht beheben lassen, so ziehen sie b...
Störung: nach dem batteriewechsel der fernbe- dienung lässt sich das gerät nicht mehr fernbedienen (nur bei sondersoft- ware mit geänderter fernbedienungs- adresse im p10). Ursache: die fernbedienung war vor dem batterie- wechsel auf fernbedienungsadresse 2 eingestellt. Durch den batteriewechsel ist...
22.
English 23.
Welcome. We are delighted that you have decided to purchase a product. Your new p10 valve pre-amplifier is a hi-fi unit of the highest class, which has been carefully designed and developed with the wishes of the demanding music lover as absolute top priority. We live in the age of broad-band me...
Contents page operation front panel controls ............................................................................................................ 26 selecting the operating positions and source .................................................................. 26 programs ......................
Front panel controls 1 1 1 1 main switch the main switch is used to select the mode of operation (off, stby, heat, hv) as well as the listening source. The switch can be rotated manually in either direction. If the remote control handset is used, the motorised switch moves automatically to the selec...
Programs the s (special) and p (program) settings can be used to access special functions which are not generally needed in normal operations. For this reason the appropriate menus can only be operated using the , and buttons on the front panel. The function of the buttons is as follows: : act...
Front panel push-buttons 2 2 2 2 / hold the button pressed in to switch the p10’s recording outputs on; the symbol lights up when the recording outputs are switched on. You can now make a recording of the programme to which you are currently listening; this is carried out via the recorder out so...
9 9 9 9 screen the front panel of the p10 incorporates a screen which provides information about the amplifier’s operational state. Additional information can also be called up on the screen when desired. The meaning of the individual illuminated symbols is listed in the table below. Symbol function...
Remote control handset the p10 is supplied complete with the f10 remote control handset, which can be used to operate all the essential functions of the p10. The f10 can also control all source devices, provided that they feature an rlink control socket. Function switches the amplifier on and off fr...
Protective circuit the p10 is fitted with a micro-processor controlled protective circuit which constantly monitors all sections of the amplifier during its entire period of operation. The protective circuit ensures that the valves are heated gently, thereby extending the useful life of these compon...
Safety notes for your own safety please consider it essential to read these operating instructions right through, and observe in particular the notes regarding setting up, operation and safety. The unit must be set up in such a way that none of the connections can be touched directly (especially by ...
Approved usage this device is designed exclusively for reproducing sound and/or pictures in the domestic environment. It is to be used in a dry indoor room which meets all the recommendations stated in these instructions. Where the equipment is to be used for other purposes, especially in the medica...
Back panel connections 1 1 1 1 aux 2 - input sockets universal pre-amplifier input. 2 2 2 2 aux 1 - input sockets universal pre-amplifier input. 3 3 3 3 gnd connect the earth lead of the source devices to this terminal in order to avoid audible hum (see 'front panel controls, float'). 4 4 4 4 aux/ph...
Mains fuse a replacement fuse should only be fitted by a qualified person. The replacement fuse must be of exactly the same type and rating as the original, as stated on the amplifier’s back panel placard. Mains input / mains switch this socket is for mains connection and contains the main fuse. The...
Setting up, wiring, using the unit for the first time unpacking carefully unpack the amplifier and store the original packing material carefully. The carton and packing are specially designed for this unit and will be needed again if you wish to move the equipment at any time. If the unit gets very ...
Connections the amplifier wiring arrangements are shown in the diagrams in the appendix. Mains and loudspeaker cables, and also remote control leads must be kept as far away as possible from signal leads and antenna cables. Never run them over or under the amplifier. Notes on connections: • be sure ...
Glossary aux universal pre-amplifier input (aux = auxiliary input) for connecting high-level signal sources (i.E. Signal sources with an output level between 0.25 v and 4 v). Balance the balance control provides infinite adjustment of level between right and left channels (shift of stereo centre), e...
Tasi ( surround interface) this interface, normalised by , enables you to loop a surround decoder between the source select switch and the amplifier’s volume control. If a decoder is connected in this way, the interface automatically detects it and switches to surround mode. In surround mode th...
Trouble shooting many problems have a simple cause and a correspondingly simple solution. The following section describes a few difficulties you may encounter, and the measures you need to take to cure them. If you find it impossible to solve a problem with the help of these notes please disconnect ...
Problem: the machine does not respond to remote control commands after you fit new batteries in the remote control handset (only when the remote control address has been changed using special software). Cause: the remote control was set to remote control address 2 before you changed batteries. This ...
Anhang / appendix a verwendung von bananensteckern siehe kap. 'anschlusselemente'. Use of banana plugs: see the section entitled 'back panel connections'. * massekabel erforderlich, wenn betriebsart 'float' für d10 verwendet wird. Ground lead necessary if operating mode 'float' is used for d10. 42.
Anhang / appendix b technische daten / technical specifications eingänge / inputs empfindlichkeit / sensitivity 6 250 mv / 20 kΩ Ω Ω Ω aufnahmeausgang / recorder outputs 1 kopfhörerausgang / phones max. Ausgangsspannung / max. Output level lastimpedanz / load impedance 7 v eff > 50 Ω Ω Ω Ω frequenzg...
B elektroakustik gmbh & co. Kg herford deutschland * germany.