Software version v 1.0 bestellnummer / order no. 9103-0418 de/uk betriebsanleitung user manual e-series power plant mk ii.
2.
3 seite / page deutsch ........................................................................................................ 4 english ......................................................................................................... 22 anhang / appendix a: anschlussbilder ...................
4 willkommen. Wir freuen uns, dass sie sich für ein -produkt entschieden haben. Mit ihrem neuen vollverstärker haben sie ein hifi-gerät der spitzenklasse erworben, bei dessen konzeption und entwicklung den wünschen des audiophilen musikliebhabers oberste priorität eingeräumt wurde. Die innovative...
5 inhaltsverzeichnis seite bedienung bedienelemente der frontseite .......................................................................... 6 lautstärke und balance ...................................................................................... 6 quellenwahl ...................................
6 bedienelemente an der frontseite mit den tastern an der gerätefront können alle wichtigen funktionen des power plants bedient werden. Sämtliche informationen zum gerätezustand werden über leuchtdioden angezeigt. Im folgenden werden die funktionen der gerätetaster und anzeigeelemente näher erläuter...
7 quellenwahl wahl der hörquelle durch antippen eines tasters zur quellenanwahl wird eine der signalquellen als hörquelle angewählt. Die leuchtdioden über den quellentastern zeigen an, welche quelle zur zeit gehört wird. Die signale der gewählten quelle stehen an den record out buchsen für eine aufn...
8 klangregel- funktionen dervollverstärker ist mit einer gehörrichtigen lautstärkeregelung (loudness) ausgestattet, die bei sehr geringen lautstärken die frequenzabhängige empfindlichkeit des menschlichen ohres entsprechend der gehörphysiologie kompensiert. Durch den taster wird die gehörrichtige ...
9 fernbedienung bei einem vorhanden music player oder cd-player der e-serie kann der power plant über dessen fernbedienung bedient werden. Ist kein music player oder cd-player in der anlage vorhanden, so steht als sonderzubehör ein fernbedienungsset fbs100 zur verfügung. Die taster der fernbedienung...
10
11 installation inbetriebnahme sicherheitshinweise in diesem kapitel werden alle dinge von grundsätzlicher bedeutung für die aufstellung und inbetriebnahme beschrieben, die nicht für den täglichen umgang mit dem gerät relevant sind, die aber trotzdem vor dem ersten gebrauch gelesen und beachtet werd...
12 anschlusselemente a2 / tv universeller vorverstärker-line-eingang zum anschluss von beliebigen stereo audio geräten oder tv-geräten. A1 / ph universeller vorverstärker-line-eingang dieser eingang kann durch einbau eines phono mm oder phono mc moduls (sonderzubehör) zu einem eingang für analoge pl...
13 rs 232 schnittstelle zum software-update und zur rechnergesteuerten bedienung von gerätefunktionen (home-automations-systeme wie z. B. Crestron, amx, usw.). Detaillierte informationen zur rs 232 schnittstelle, zum protokoll und befehls- listen finden sie im downloadbereich auf der website http://...
14 aufstellung und verkabelung packen sie das gerät vorsichtig aus und heben sie die originalverpackung sorgfältig auf. Der karton und das verpackungsmaterial sind speziell für dieses gerät konzipiert und bei späteren transporten ein sicherer behälter. Bitte beachten sie unbedingt die sicherheitshin...
15 lautsprecher- und signalkabel die verwendeten lautsprecher- und signalkabel haben einen nicht zu unter- schätzenden einfluss auf die wiedergabequalität der gesamtanlage. Empfiehlt daher die verwendung hochwertiger kabel und steckverbinder. In unserem zubehörprogramm finden sie eine reihe exzellen...
16 sicherheitshinweise alle in diesem gerät verwendeten bauteile entsprechen den geltenden deutschen und europäischen sicherheitsnormen und -standards. Eine genaue qualitätsprüfung aller materialien, die sorgfältige produktion, so- wie die vollautomatische, rechnergesteuerte endkontrolle eines jeden...
17 bestimmungsgemäßer gebrauch das gerät ist ausschließlich zur ton- und/oder bildwiedergabe im heimbereich in trockenen räumen unter berücksichtigung aller in dieser anleitung ge- machten angaben bestimmt. Bei allen anderen einsatzzwecken, insbesondere in medizinischen oder sicher- heitsrelevanten ...
18 betriebsstörungen viele betriebsstörungen haben eine einfache ursache, die sich leicht beheben lässt. Im folgenden abschnitt sind einige mögliche störungen sowie maßnahmen zu deren behebung aufgeführt. Sollte sich eine aufgetretene störung durch diese hinweise nicht beheben lassen, so ziehen sie ...
19 kein ausgangs-signal an den lautsprechern, die leuchtdiode über dem taster blinkt ab- wechselnd (protection- schaltung hat ange- sprochen). Ursache 1: die protection-schaltung hat wegen Überhitzung oder Übersteuerung abgeschaltet. Abhilfe: lautstärke herabsetzen; wenn sich der verstärker nach c...
20 glossar aux universeller vorverstärker-eingang (aux engl. Auxiliary input) zum anschluss hochpegeliger signalquellen (d. H. Signalquellen mit einem ausgangspegel zwischen 0,25 v und 3,5 v). Balance die pegelbalance zwischen rechtem und linkem kanal (veränderung der stereomitte), z. B. Bei untersc...
21 quellgerät als quellgeräte (engl. Source) werden die elemente einer hifi-anlage bezeichnet, die ein tonsignal liefern, wie tuner, cd-player, recorder etc. (signalquellen). Dabei wird unterschieden zwischen hörquellen und record- bzw. Aufnahme-quellen. - hörquelle ist das gerät, das gerade gehört ...
22 welcome. We are delighted that you have decided to purchase a product. Your new integrated amplifier is a hi-fi unit of the highest quality, designed and developed with a single aim as top priority: to satisfy the requirements of the audiophile music lover. This unit is the embodiment of inno...
23 contents page operation front panel controls ........................................................................................... 24 volume control and balance ............................................................................... 24 source selection .................................
24 front panel controls with the front panel buttons all functions of the power plant can be operated. All information about the operating state of the power plant is displayed by the led lamps above the buttons. In the following sections the functions of the front panel controls and display leds ar...
25 source selection selecting the listening source to select one of the signal sources as the listening source, push the corresponding button briefly. The leds above the source buttons indicate which input is currently selected for listening. The audio signals of the selected source device are prese...
26 tone control functions the integrated amplifier is equipped with a volume-dependent tone control (loudness) circuit, which compensates for the frequency-dependent sensitivity of the human ear at very low volume levels, due to the characteristics of aural physiology. Pressing the button switches...
27 remote control handset if a music player or cd player is present in your system, the power plant can be controlled using the f100 / fm100 remote control of the player via the e link control interface. If no music player oder cd-player is present, an optional remote control set fbs100 can be obt...
28.
29 installation using the system for the first time safety notes this section describes all those matters which are of fundamental importance when setting up and first using the equipment. This information is not relevant in daily use, but you should nevertheless read and note it before using the eq...
30 back panel connections a2 / tv universal line level pre-amp input for connecting any audio sources or tv sets. A1 / ph universal pre-amplifier line input this input can be upgraded to form an input for an analogue turntable by fitting a phono mm or phono mc module (optional accessories). The ph...
31 rs 232 interface for firmware-updates and for computer-controlled operation of device functions through home-automations-systems (crestron, amx, etc.). Detailled information regarding the rs232 interface and command tables can be found in the technical download section of the website http://www...
32 installation and wiring carefully unpack the unit and store the original packing material carefully. The carton and packing are specially designed for this unit and will be needed again if you wish to move the equipment at any time. Please read the safety notes in these instructions. If the unit ...
33 loudspeaker and signal cables loudspeaker cables and signal cables (inter-connects) have a significant influence on the overall reproduction quality of your sound system, and their importance should not be under-estimated. For this reason recommends the use of high-quality cables and connectors...
34 safety notes all the components in this device fulfil the currently valid german and european safety norms and standards. We ensure that our products are of consistently high quality, and meet all specifications, by checking all materials rigorously for quality, using meticulous production method...
35 approved usage this device is designed exclusively for reproducing sound and/or pictures in the domestic environment. It is to be used in a dry indoor room which meets all the recommendations stated in these instructions. Where the equipment is to be used for other purposes, especially in the med...
36 trouble shooting many problems have a simple cause and a correspondingly simple solution. The following section describes a few difficulties you may encounter, and the measures you need to take to cure them. If you find it impossible to solve a problem with the help of these notes please disconne...
37 no output signal at the loudspeakers; the led above the button flashes (the protection circuit has tripped). Cause 1: the protection circuit has tripped due to overheating or overloading. Remedy: reduce volume and wait for about 20 seconds. If the unit does not switch on again automatically, it...
38 glossary aux universal pre-amplifier input (aux = auxiliary input) for connecting high-level signal sources (i.E. Signal sources with an output level between 0.25 v and 3,5 v). Balance the balance control provides infinite adjustment of level between right and left channels (shift of stereo centr...
39 update / upgrade this unit can be kept up to date with the current state of development by fitting an update or upgrade. - an update expands the unit’s operating facilities by the installation of a new program memory. - an upgrade involves the installation of replacement sub-assemblies or auxil...
40 anhang / appendix a verwendung von bananensteckern siehe kap. 'anschlusselemente'. Use of banana plugs: see the section entitled 'back panel connections'. Anschluss-schema / wiring diagram * hinweis: für den anschluss von plattenspielern kann der power plant mit hilfe der als optional lieferbaren...
41 * optional.
42.
43 anhang / annex b technische daten / technical specifications nennleistung pro kanal output power (rms) per channel 8 Ω Ω Ω Ω 4 Ω Ω Ω Ω 2 x 140 w 2 x 240 w impulsleistung output power (peak) 8 Ω Ω Ω Ω 4 Ω Ω Ω Ω 2 x 210 w 2 x 380 w frequenzgang / frequency response 1 hz – 60 khz (+0/-3db) klirrfakt...
elektroakustik gmbh & co. Kg herford deutschland * germany.