T-Rex Bloody Mary User Manual - page 4
BloodyMary controls
GAIN
controls the degree of distortion. Experiment to get the edge
you want – but don’t max it out if you’re afraid of hurting
yourself!
LEVEL
sets the overall volume, no matter what the gain. Use it with
a“level” head – this pedal is loud.
LOW
takes you to a subterranean universe of power for thumping
chords and sublime leads that reach as deep as they soar high.
MID
controls the sweet spot that gives you fullness and body. Pull it
back for a classic metal sound. Crank it up to go grunge.
HIGH
unleashes a blitzkrieg of searing sonic pleasure. Turn it all the
way up, and it will cut through solid steel. Handle with care.
BODY
delivers a rich extra fill by boosting lower-mids and lows. Kick it in
to give your sound an extra lift at critical moments.
Size
Box 100x120x35mm + Switches/knobs on top
6mm + Knobs on bottom 3mm
Connections
INPUT-Jack 6,3 mm. OUTPUT-Jack 6,3 mm.
DC-Jack 2 mm. pin. Center pin negative.
Power supply
9 volt DC or battery 9 V Alkaline.
Power consumption
35 milli Amperes.
Weight
500 gram packed in a box.
Battery
Open the battery-cover on the back using a
flat-tipped screwdriver in the slot.
manual_bloodymary.indd 4
26/05/06 12:09:44