T-Rex ToneBug User Manual - page 3
TURN ON THE FUZZ!
Using your Fuzz
1. Insert a 9V alkaline battery or connect to an electrical outlet using
a T-Rex Fuel Tank power supply (not included).
2. Plug your guitar into the INPUT jack, and run a lead from the
OUTPUT jack into your amp.
3. Use the FUZZ knob to determine how dirty you want your sound,
and the LEVEL knob to set your overall output volume.
4. Use the TONE knob to experiment with the timber of your fuzzed
sound, so it matches your set-up, the music you play, and your
own personal taste.
HOW IT WORKS
Boost and clip
A fuzz box works similarly to an overdrive or distortion pedal, but it
is far more extreme. It boosts your input signal until it clips so drasti-
cally that the guitar’s natural sine wave output is transformed into
something much closer to a square wave.
A word of advice
You’re going to love your T-Rex Fuzz, but remember that fuzz is only
one type of distortion. For subtler effects, consider adding a T-Rex
Overdrive and Distortion pedal to your rack. Also part of our afford-
able Tonebug range, these pedals will broaden your sonic palette
with the full range of classic distortion effects.