‘’ jw weighing scales.
Jw weighing scales operation manual rev: c1, june 2012 jw weighing scales operation manual contents 1. Introduction…………………………………………………………1 2. Name and functions…………………………………………….2 2.1 key board………………………………………………………….2 2.2 display………………………………………………………………2 3. Operation………………………………………………………….4 3.1 basi...
Jw weighing scales operation manual rev: c1, june 2012 jw weighing scales operation manual press zero to confirm when display gets stable. Display will be show previous calibration weight and start to blink first digit, if necessary enter the calibration weight value by pressing mode and % keys. Pre...
Jw weighing scales operation manual rev: c1, june 2012 jw weighing scales operation manual m+ to store current weight into the memory smpl to select parts counting, if not in weighing mode, it will return to weighing mode u.Wt to select to set samples manually hi limit to set high limit low limit to...
Jw weighing scales operation manual rev: c1, june 2012 jw weighing scales operation manual and indicator hi or low will be displayed. Enter hi limit or low limit value by pressing numeric keys. Press zero key to confirm, display will be change to normal display. Note: the load weight must be greater...
Jw weighing scales operation manual rev: c1, june 2012 jw weighing scales operation manual remove weight from the platform. Tared weight is displayed. It can set only one tare value. It can display with a minus value. Press tare key. Zero is displayed, tare weight is cleared. Enter a tare value usin...
