T Scale M301 Operation Manual - page 3
M30 series personal scale operation manual
REV: Y1, July 2, 2013
M30 series personal scale operation manual
4. Calibration
Turn on the scale. And during its self checking
Press
key and the calibration switch (at the rear of the indicator)
together, display will show
Clear the pan of the scale, when it get stable, Press
key, display
will show the calibration value, you can change the value by pressing
and
key, then press
to confirm.
Display will show
Place the test weight on the platform.
After stable, press
to confirm, display will show
Then will start self-test and will come to normal display.
Note: the unit (kg / lb) is the same as the last displayed one.
That is: before you restart the scale to do calibration, if you see the unit is kg,
then in calibration, the unit is kg; if you want to change to lb, you need to press
U key to change the unit before you restart it.
5. Precision*10
If you want to see more accurate weight value, press and hold
for 2 seconds, display will show one more decimal place, the last digit will
twink for 5 seconds, then it will go back to normal weighing value
automatically.
-4-
1. INTRODUCTION
The M30 series personal scale is accurate, fast and versatile series
of personal scales with tare, BMI functions. The capacity is up to 250kg.
M301 has a height measurement, but M307 doesn’t.
The display is 25 mm LCD with white LED back light display.
2. KEY DESCRIPTIONS
Turns the scale power On / Off.
Sets display to Zero / Move digit left.
1. Tare the scale.
2. Escape from the menu.
Set to hold mode
Set to BMI mode
1. Enter parameter settings
2. Choose menu block or options one by one
3. Increase the digital number
Print the weight value / Enter into the menu
-1-
unload
load
pass