1. DL manuals
  2. Tab
  3. Arcade Game Machines
  4. Golden Island Nevada
  5. Operating Instructions Manual

Tab Golden Island Nevada Operating Instructions Manual

Summary of Golden Island Nevada

  • Page 3

    We thank you for choosing golden island nevada we recommend you, for a satisfactory use of your golden island nevada, that you read the operating instruction exactly. We wish you much success and much joy with your golden island nevada. Please store this operating instruction in such a way as to mak...

  • Page 4

    Modification history: 11.11.2008 first revision 08.01.2009 v2.01 22.01.2009 v2.03: additions for otm 16.03.2009 v2.02 and v2.04: additions for maintenance of printer and coin and note acceptor; changes in operator mode for hopper statistics, refill and revision 10.06.2009 v2.07: new game aloha hawai...

  • Page 5

    Contents contents iii 1 safety information 1 2 description 4 2.1 general . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.2 system components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 options . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 6

    9.6 otm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 9.7 file check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 9.8 reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 10 operator menu 2...

  • Page 7

    12.4 attendant accounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 12.5 basic settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 13 demo mode 33 14 games 34 14.1 euro soccer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 9

    1 safety information safety regulations for the user: the machine should only be operated in a dry room and connected to a safety plug socket that complies with the relevant safety standards. • before starting the machine, it should be allowed to attain room temperature. • check the main voltage bef...

  • Page 10

    • fix the socket of the machine on the floor like described in the following picture. • only use adequate screws for fixing the socket on the ground. The type of screws depens on the floor. The manufacturer doesn’t assume any liability for damages resulting from deficient fixation of the machine. • ...

  • Page 11

    Disposal of old electrical and electronic equipment (applica- ble in the european union and other european countries with separate collection systems) this symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over t...

  • Page 12

    2 description 2.1 general the golden island nevada is an ergonomically designed gaming machine. The machine contains normally an electronic coin acceptor, an electronic banknote acceptor, two 19 inches tft displays with touchscreen on the lower screen and a complete pc system. 2.2 system components ...

  • Page 13

    2.3 operating elements all games in the golden island nevada are played via touch screen and/or push buttons. There are 8 push buttons in total that can be used optionally to the touch screen for various functions. Page: 5.

  • Page 14

    Tower lights* the tower light is an optional component of the golden island nevada. Various models with up to 3 differently couloured lamps are possible. The standard model is a tower light with 2 lighting units. The following specification describes the tower light’s supported functions as implemen...

  • Page 15

    3 technical data 3.1 machine dimensions unpacked packed depth 54 cm 59 cm width 52 cm 77 cm height 175 cm 182 cm weight 1 122 kg 133 kg 1 the weight may vary depending on the installed optional components page: 7.

  • Page 16

    3.2 electrical data electricity 230 v ac 50 - 60 hz performance 190 watts cutout 2 x 3,15 amperes note: if you want to connect more than one machine to an electric circuit please note: do not plug in more than 3 machines to a normal installed electrical outlet with a cutout of 16 ampere. Page: 8.

  • Page 17

    4 initial operation each machine has already been tested at the factory and is delivered with initial settings pre- programmed. We recommend a 15 minutes warm up time before initial operation so that the machine can reach optimal operation temperature. However, temperature differences can change the...

  • Page 18

    5. If you set up the machine for the first time, please proceed with the following steps: a) enter the configuration settings menu (see chapter 9, page 17) b) perform either a • ram clear (all accounting data, statistic data and event logs will be cleared) or a • factory reset (all configuration set...

  • Page 19

    5 boot up menu by activated test switch by switching on the test switch (also called operator switch, located by the rocker switch) before booting the machine you are able to enter the following programs (only during normal start): you can select the different buttons by pressing the hardware button...

  • Page 20

    This dialog prompts you to insert or remove an usb stick at the pc page: 12.

  • Page 21

    6 update process note: for some configurations the pc box is sealed or there is no update connector on the pc box because it is not allowed to perform an update. During the update process the pc box must be connected to the cable harness because the initialisation process will determine the type of ...

  • Page 22

    • please check at least these configuration settings: – time / date select your time zone first and if you like automatically daylight saving changes (strictly recommended). Correct the actual time and date if necessary (can be changed only after ram clear or factory reset) note: if you are using ot...

  • Page 23

    7 info page by pressing the info button in normal game mode (or by touching the info button on the upper right corner on the touch screen) for a minimum of 3 seconds the following screen will appear: on this screen you can see: • actual date and time • md5 checksum of the program • configuration and...

  • Page 24

    8 service menu - different levels there are different security levels: • configuration settings menu initial set up and configuration by the operator (see chapter 9, page 17) • operator menu accountancy (main accounting, journal, game statistics), test mode, non-critical configu- ration settings (la...

  • Page 25

    9 configuration settings menu all of the configuration settings can only be modified if credits are empty. Some of these settings can be changed only after ram clear or factory reset. Enter the configuration settings menu by turning on the configuration settings switch which is located inside the lo...

  • Page 26

    Security select the warning messages which you would like to have. In some configurations you cannot change or see several settings, because they are required or not allowed, in case of the jurisdic- tion of the country. • „show warning after reboot (clear warning to continue)“ if enabled, a warning...

  • Page 27

    - phone number address of location (i.E. +43 7229 78040) - fax number address of location (i.E. +43 7229 78660) - email address address of location (i.E. Sales@tab.At) - district address of location - dongle serial number 3 number of the configuration dongle device - machine data 3 several data’s of...

  • Page 28

    • lockout level if hopper level is below this level, banknote acceptor will be disabled (locked) and the text „coins only“ will be shown on the display bar of the game. • hopper float level if hopper level is below this level, the text „insufficient coins ()“ will be shown. • hopper divert level max...

  • Page 29

    • hand pay if enabled, hand pay (from the supervisor or attendants menu or with the corresponding key switch / e-key which is assigned to that function (see chapter 9.3, page 20)) is allowed • collect button active -> call attendant message if enabled, the collect button is active. If a player press...

  • Page 30

    - location 1 name of establishment - street/number 1 street / number - zip code/city 1 zip code / city - banner text cashout ticket - validation text validation - next voucher number 1 - validity 30 - machine id 1 1 - avdertising text „your advertising text“ 1 marked data are defined in menu machine...

  • Page 31

    Here you can set the start value of the mechanical meters. Once set correctly, you will have an electronic copy to monitor the mechanical meters (see ac- countancy, chapter 10.2, page 27). If the machine is working correctly, there should occur only a small difference during a long period of time wh...

  • Page 32

    Update this information on the website. To register a machine for an existing location just provide the location name or the location number. Tan-code: for registering a machine to the system, please enter a valid tan-code from your otm account and press button „register“. The machine has to be conn...

  • Page 33

    10 operator menu enter the operator menu by activating the switch or e-key which is assigned to this function (see chapter 9.3, page 20). The default mapping is the operating switch inside of the machine behind the main door labelled with „test“ beside the rocker switch. On the start page you can ad...

  • Page 34

    • last tickets printed • machine journal (all changes of settings, door openings, actions of supervisor and atten- dants, ...) • error log (if the machine is running fine, you should not see any errors on this page) hopper hopper statistic here you can see a detailed list of all hopper accountings: ...

  • Page 35

    Game statistics detailed list of number of games, bet, win and win percentage of primary games and secondary games. The operator is able to clear this statistics at any time. 10.2 test mode the test mode gives you the possibility to test the whole machine without an influence on the accounting. Disp...

  • Page 36

    Hopper here you can test the hopper by paying out one coin or all coins. If you leave this menu, the payout will be stopped. No payout will be counted in this mode. Therefore you have to put all paid out coins back into the hopper, otherwise the amount of coins accounted wont be correct anymore. 10....

  • Page 37

    11 supervisor menu enter the supervisor menu by activating the switch or e-key which is assigned to this function (see chapter 9.3, page 20). The default mapping is the supervisor key switch on the right side outside of the machine. Depending on configuration, some menus may not be available. 11.1 s...

  • Page 38

    If the ticket can not be payed out the reason will be show: • ticket is invalid - if the ticket was inserted it might have been read incorrectly. If the code was entered manually it might have been misstyped. • ticket is expired • ticket is from another location • ticket is already paid ticket list ...

  • Page 39

    In the third field there is the summary of the accountings of supervisor and attendant 1, 2 and 3 and the total sum which the supervisor has to give to the operator (in colour red) or which he will get from the operator (in colour green). Attendant 1, 2 and 3 the supervisor is responsible for the se...

  • Page 40

    12 attendant 1/2/3 menu enter the attendant menu by activating the switch or e-key which is assigned to this function (see chapter 9.3, page 20). There is no default mapping. 12.1 start page please see chapter 11.1, page 29 12.2 ticket payout please see chapter 11.2, page 29 12.3 journal please see ...

  • Page 41

    13 demo mode only available in certain configurations the operator can set the machine into demo mode on his start page. If demo mode is activated, you can test and play with the machine but no events will be recorded or accounted. If credit will come to zero, credit will be increased automatically....

  • Page 42

    14 games 14.1 euro soccer 10-line, 5-reel game all wins pay left to right ball substitutes for all symbols except goal feature game 3, 4 or 5 scattered goal awards 15 feature games during feature games all wins pay double. Feature games can be won again during the feature and are played at current b...

  • Page 43

    • „red“ - „black“ • „even“ - „odd“ • „1-18“ - „19-36“ • „first dozen“ - „second dozen“ - „third dozen“ • „colonne“... On the columns 1-34, 2-35 or 3-36 • „six line“... On six consecutive numbers consisting of two consecutive cross rows (e.G. 4-5- 6-7-8-9) • „corner“... On four numbers that create a ...

  • Page 44

    14.8 hot fruits 10-line, 5 reel game all wins pay left to right except scatters 14.9 secrets of maya 10-line (5-line in configuration za), 5 reel game all wins pay left to right except scatters pyramid substitutes for all symbols except calendar feature game 3, 4 or 5 scattered calendars award 10 fe...

  • Page 45

    15 protocol ids gameid game name 1 roulette 2 keno 3 royal poker 4 caribbean gold 5 royal liner 6 pyramids of giza 7 euro soccer 8 indian treasure 9 aloha hawaii 10 hot fruits 11 mystic ocean 12 secrets of maya 13 bingo 14 double bingo 15 black pearl 20 menupayoutgame (configuration za only) page: 3...

  • Page 46

    16 error messages message reason could be caused by meter in disconnected meter out disconnected the declared meter is not connected to the io con- troller card on the pc box broken wire meter defect io controller defect hopper 1 disconnected hopper 2 disconnected the declared hopper is not correct ...

  • Page 47

    Coin acceptor disconnected note acceptor disconnected the declared cash acceptor is not connected correctly to the io controller on the pc box. Cash acceptor disconnected another cash acceptor is connected an runtime broken wire cash acceptor defect io controller defect test the declared cash ac- ce...

  • Page 48

    17 comestero rm5/rm5hd coin acceptor maintenance this fact sheet provides the necessary information for the clearing and maintenance of the rm5/rm5hd electronic coin validator. Cleaning at regular intervals assures a high quality standard of coin recognition and, in the long run, reduces the risk of...

  • Page 49

    (fig. 1) (fig. 2) if the coin validator is still inefficient after cleaning do not hesitate to contact our hotline. Page: 41.

  • Page 50

    18 jcm uba-10-ss bill acceptor maintenance page: 42.

  • Page 51

    Periodical cleaning depending on its environment and amount of use, the uba bill acceptor may require routine maintenance to restore optimum performance. Under normal use, the uba bill acceptor should be checked every 2 to 3 months. For unusual operating conditions, such as when the uba bill accepto...

  • Page 52

    Page: 44.

  • Page 53

    19 mei cashflow sc83 bill acceptor maintenance according to the manufacturer mei no maintenance is required. Page: 45.

  • Page 54

    20 astro gba hr1 bill acceptor maintenance periodical cleaning depending on the environment and amount of use, the hr1 currency validator may require routine maintenance to restore optimum performance. Under normal use, the currency validator should be checked every 2 to 4 months . For unusual opera...

  • Page 55

    Cleaning process 1. Switch off the gaming machine and open main and display door 2. Open the bill acceptor by squeezing the two purple clips and opening the unit. 3. Use the provided compressed air (under compliance of the instruction -> do not rotate the spray more than 30 ◦ ) to blow away any debr...

  • Page 56

    4. Please use a soft, lint-free cloth dampened with a weak solution of washing fluid and water to clean the following areas. Wipe • the upper and lower note paths, • the belts and • the top and bottom pinch wheels of note path. To rotate the belts for cleaning turn the gear at the rear of the valida...

  • Page 57

    21 ithaca epic 950 tm ticket printer – paper load and maintenance loading tickets into feeding mechanism when loading new ticket stacks, be sure that there is power to the printer. The first ticket of the stack must be inserted into the printer by hand. The printer’s ticket tray is integrated with a...

  • Page 58

    Removing loaded tickets (paper jam) there are two ways to remove unused tickets: 1. The first was is to release the ticket cover by lifting and rotating backwards, this will relieve pressure to the platen and ticket can be removed. This will also allow an opening that provides space to check the tic...

  • Page 59

    Detailed instructions a) open the cover and remove all tickets from ticket feed path. B) close the cover. C) open cleaning card pouch and remove cleaning card. D) insert cleaning card into feed path. E) the cleaning card will automatically be drawn into the feed path. F) open the cover and then remo...

  • Page 60

    22 azkoyen - hopper rode u ii plus maintenance periodical cleaning • general cleaning of the apparatus after 500,000 coin extraction • it is recommended to clean the coin exit area, where the optic sensors are, more frequently. Cleaning process 1. Open the 2 screws as shown below. 2. Cleaning of the...

  • Page 61

    Warning • never use products that contain benzene hydrocarbons. These products severely degener- ate the plastic parts producing irreparable damage. • never submerge the hopper in any liquid. Page: 53.

  • Page 62

    23 replacing coin or bill acceptor if a coin acceptor or a bill acceptor has to be changed in case of malfunction or bad performance, please proceed with the following steps: 1. Switch off the machine 2. Replace the acceptor 3. Switch on the machine 4. Check the coin or note settings in the configur...

  • Page 63

    24 declaration of ce conformity page: 55.

  • Page 64

    25 end-user license agreement for microsoft software important - read carefully: this end-user license agreement ( „eula“) is a legal agreement between you (either an individual or a single entity) and the manufacturer („manufacturer“) or the special pur- pose computing device („system“) you acquire...

  • Page 65

    • single system. The software is licensed with the system as a single integrated product. The software may only be used with the system. • rental . You may not rent or lease the software. • software transfer. You may permanently transfer all of your rights under this eula only as part of a sale or t...

  • Page 66

    5. Product support. • product support for the software is not provided by microsoft or its subsidiaries. For product support, please refer to manufacturer’s support number provided in the documentation for the system. Should you have any questions concerning this eula, or if you desire to contact ma...

  • Page 67

    26 warranty terms by tab-austria gmbh & cokg (tab hereinafter) we are granting a warranty for this machine under the following conditions: insofar as the „general terms of business of tab-austria industrie- und unterhaltungselek- tronik gmbh & co kg“ are not modified by the following, which sets out...

  • Page 68

    The warranty will only be granted for new products by tab, not for their spare parts, not for products of different brands and manufacturers and corresponding spare parts. No warranty is granted for used products either. In accordance with the following provisions, we shall repair defects to the mac...

  • Page 69

    The tft lcd display consists of more than 1,000,000 thin-film transistors (tft). A small amount of missing, black, or luminous points is characteristic for tft lcd technology. The war- ranty performance will be granted if more than 15 missing, black, or luminous points are present. Page: 61.

  • Page 70

    In case of any irregularities in the machine, please check power and all plug-in connections! In case you cannot remove an error, please call our hotline: call +43-7229-780-40 ext. 250 page: 62.

  • Page 71

    27 notes nevada - lt - en page: 63.