Quick start guide model a10150 150mhz, 16vp-p single channel wideband amplifier publication no. 130724 tabor electronics ltd. P.O. Box 404, nesher israel 3688809 tel: +972-4-821-3393, fax: +972-4-821-3388 copyright 2013 by tabor electronics ltd. Written in israel. All rights reserved. This book or p...
Quick start guide a10150 feature highlights • 150mhz bandwidth • high amplitude to 20vp-p into 50 Ω • low distortion • small footprint, all metal case • fast transition time of • custom configuration of: gain (x5 or x10) maximum output (16vp-p or 20vp-p) figure 1, model a10150 introduction the a1015...
A10150 configuration options the a10150’s standard configuration enables a maximum output voltage of 16vp-p into 50 ohms and a gain of x5. Custom gain of x10 and maximum voltage of 20vp-p into 50 ohms options can be ordered. Warning this manual has no schematics and no instructions how to modify the...
Quick start guide operating environment the a10150 is intended for indoor use only and should be operated in a clean, dry environment with an ambient temperature within the range of 0 °c to 40 °c. Warning the a10150 must not be operated in explosive, dusty, or wet atmospheres. Avoid installation of ...
A10150 figure 3, 2 x a10150 kit for dual channel unit long term storage or repackaging for shipment if the a10150 is to be stored for a long period of time or shipped to a service center, proceed as directed below. If repacking procedures are not clear to you or, if you have questions, contact your ...
Quick start guide unpacking and initial inspection unpacking and handling of the a10150 requires normal precautions and procedures applicable to handling of sensitive electronic equipment. The contents of all shipping containers should be checked for included accessories and certified against the pa...
A10150 electrical specifications input characteristics characteristics description no. Of channels 1, (differential; normal and inverted) connector front panel sma impedance 50Ω coupling dc damage level 6vp-p (-3v to +3v peaks) output characteristics characteristics description no. Of channels 1 cou...
Quick start guide mechanical, environmental and maintenance specifications power feed characteristics description voltage requirement ±15vdc power consumption 7w signal ground grounded to case ground mechanical characteristics description dimensions 45 x 30 x 85 mm (w x h x d) weight without package...
