Copyright 2016 by tabor electronics ltd. Written in israel. All rights reserved. This book or parts thereof may not be reproduced in any form without written permission of the publisher. Quick start guide model a10160 45mhz, 34vp-p single channel wideband amplifier publication no. 140724 rev. 1.1 ta...
Quick start guide 2 a10160 feature highlights 45mhz bandwidth high amplitude to 34vp- p into 50Ω high output current drive to 1a fast transition time of small footprint, all metal case custom gain configuration low distortion figure 1, model a10160 introduction model a10160 is an ultra-small footpri...
A10160 3 capacitive loads may damage the amplifier. Configuration options the a10160 ’s standard configuration enables a maximum output voltage of 34vp-p into 50 ohms and a gain of x10. Custom gain of x15 or x20 can be ordered. Warning this manual has no schematics and no instructions how to modify ...
Quick start guide 4 operating environment the a10160 is intended for indoor use only and should be operated in a clean, dry environment with an ambient temperature within the range of 0 °c to 40 °c. Warning the a10160 must not be operated in explosive, dusty, or wet atmospheres. Avoid installation o...
A10160 5 figure 3, 2 x a10160 kit for dual channel unit long term storage or repackaging for shipment if the a10160 is to be stored for a long period of time or shipped to a service center, proceed as directed below. If repacking procedures are not clear to you or, if you have questions, contact you...
Quick start guide 6 unpacking and initial inspection unpacking and handling of the a10160 requires normal precautions and procedures applicable to handling of sensitive electronic equipment. The contents of all shipping containers should be checked for included accessories and certified against the ...
A10160 7 electrical specifications input characteristics characteristics description no. Of channels 1, (differential; normal and inverted) connector rear panel sma impedance 50Ω ± 1% coupling dc damage level 6vp-p (-3v to +3v peaks) output characteristics characteristics description no. Of channels...
Quick start guide 8 mechanical, environmental and maintenance specifications power supply characteristics description power supply ±20vdc power consumption 20w signal ground grounded to case ground mechanical characteristics description dimensions 40 x 30 x 110 mm (w x h x d) weight without package ...
