TAC TS-8101 General Instructions
Printed in U.S.A.
8-08
©
Copyright 2008 TAC All Rights Reserved.
F-22633-5
APPLICATION
Electronic sensing of room temperature at wall locations.
SPECIFICATIONS
Sensing Element: Temperature sensitive Balco resistance.
TS-8101 Series, 1000 ohms ±0.1% at 70°F (21°C);
changes 2.2 ohms per 1°F (0.5°C at 70°F (21°C).
TS-811 Series, 1000 ohms when control dial is set to
sensed temperature.
Control Dial Range: See Table 1.
Environment:
Ambient Temperature Limits,
Shipping and Storage -40 to 160°F (-40 to 71°C).
Operating 40 to 140°F (4 to 60°C).
Humidity, 5 to 95% RH, non-condensing.
Locations, NEMA Type 1 indoor only.
Connections: Coded screw terminals.
Cover: Beige plastic.
Mounting: Wall.
Dimensions: 4-3/8" high x 2-3/4" wide x 1-5/8" deep
(111 mm x 70 mm x 43 mm).
STANDARD
TS-8111 °F
TS-8111-116 °C
TS-8111-770 °F only
OPTIONS (TS-8111 & TS-8111-116 only)
(for quantities of 24 or more of each part number)
Add “dash-number” (-XXX) suffix to base part no. for desired option.
Table-1 Specifications.
Part
Number
Company
Identification
Control
Dial Range
Cover
Configuration
TS-8101
TAC
-
Blank
TS-8101-770
Robertshaw
TS-8111
TAC
55-85°F
Standard cover
and two inserts
(see Options
also)
TS-8111-116
13 to 29°C
TS-8111-770
Robertshaw
55-85°F
Standard cover
and two inserts
ACCESSORIES
AT-61 Series
Brushed bronze cover plates
AT-70 Series
Brushed bronze cover plates (TS-81XX-770)
AT-82 Series
Digital thermometer cover kit
AT-82-770
Digital thermometer cover kit (TS-81XX-770)
AT-101
Lock cover kit
AT-104 Dial
stop
pins
AT-504
Plaster hole cover kit (small)
AT-505
Surface mounting base
AT-546
Auxiliary mounting plate
AT-602
Selector switch sub-base DP4T
AT-1103 Wire
guard
AT-1104 Cast
aluminum
guard
AT-1105 Plastic
guard
AT-1155 Plastic
guard
AT-1165 Plastic
guard
PKG-1093
Digital thermometer battery replacement kit
Figure-1 Sensor Wiring.
TS-8101, TS-8101-770
TS-8111, TS-8111-116
TS-8111-770
Electronic Room Temperature Sensors
General Instructions