Tachyon OPS HD User Manual - page 4
•
To charge your OPS camera, open the rubber cap over the USB and memory card slots. Then plug the small
end of the USB cable into the back of the camera and the large end into your computer's USB slot.
•
Another great way to charge your camera, even when away from a fixed power source, is to use Tachyon's
Battery-Powered Charger (Bottom Photo). It's small and light - pervect for taking into the field with your
cameras. It may also be used to charge your other USB-based electronic devices.
You can buy it in
our st ore
.
•
This charger comes with 4 AA Energizer Ultimate Lithium batteries. These will fully charge your camera
multiple times.
•
We suggest that you only use Energizer Ultimate Lithium batteries in this unit. If you use lower-quality
batteries, you may see a "Charging is not supported with this accessory ," warning.
•
This battery-powered charger will work with most electronic devices that charge via a USB cable - including
iPhones and iPods.
•
You may also use a USB adaptor and a normal wall socket, or car-lighter adaptor to charge yoru cameras.
•
When charging your camera, the LED on the top will show blue. When the battery is fully charged, this LED will
turn off.
Im po rt ant : Use only the supplied USB cable for charging your OPS or OPS HD cameras. Others may
not work and may harm your camera.
Inserting Memory Card
•
On the back of the camera is a small rubber flap. Pull this down to reveal the USB jack and the micro memory
PDFmyURL.com