Tachyon OPS Instruction Manual - page 4
•
To stop, press and hold the power button until you hear two beeps and the LED turns off.
LED Functions
•
When you are recording video, the LED on the right will shine in RED. (in older cameras, the LED is on the bottom)
•
When you are recording in Time-Lapse Photo mode, this LED will flash RED - GREEN - RED - GREEN.
•
If your memory card is full, this LED will flash GREEN for 30 seconds and then turn off.
•
If there is no memory card in your camera, or if there is an error with the card, this LED it will flash GREEN for 30 seconds before turning off.
•
If your battery is almost depleted, the LED will flash red for a while and then turn off, along with the camera.
Mounting
The OPS and OPS HD cameras come with a patented 8-direction mounting system gives you a variety of mounting options.
•
The three dimples on each side of your camera match up with the three bubbles on the gripping parts of the mounts. You can rotate your camera inside your mounts from
the 12 to 3 to 6 to 9 o'clock positions and face it either forwards or backwards.
•
Why rotate your camera? Suppose your mount is mounted at an angle that would cause your video to be rotated 90 degrees. All you need to do is rotate your camera
inside the mount so that the top is facing up. This will ensure that your video comes out right side up. The engraved Tachyon logo shows which side is up.
•
A tether is also included with your camera. Thread it through the hole on the back and make use of it when engaging in very extreme activities, as a backup to your
standard mounts.
•
The Rainproof cover is best to use in the rain or when engaging in activities that potentially might harm the lens or body of your camera, such as paintball, airsoft, or when
riding in dirt and gravel.
3M™ Dual-Lock™ is a trademark of 3M Company in the United States and/or other countries. See instructions for use on leaflet that came with your package.
Connecting to Your Computer