Instruction booklet y102b-150v vertical yagi antenna please note: a qualified structural engineer should be consulted prior to mounting an antenna on a tower or support structure. Www.Tacoantenna.Com 30377002 rev. C.
1-safety precautions to protect your antenna and receiver from lightning damage, you should ground your equipment. 1. To ground the antenna attach a ground wire under the nut of the 1/4- 20 x 2¼ in. Long hex head screw at the end of the crossarm see figure 7. Use nylon cable ties (not provided) to f...
3-antenna assembly the dipoles and elements are match marked to the supporting crossarm. The dipole insulators and parasitic elements mount to the same side of the crossarm. 1. Next, starting with dipoles “c” assemble dipoles “c” and “d” to their marked locations on the crossarm as shown in figure 2...
3. The parasitic elements are mounted onto the crossarm at its match- marked location with 1/4-20 x 2 1/4” long hex head screws, as shown in figure 3. Use a reinforcing clip at each screw location. 4-antenna mounting the antenna mounting clamp is assembled to the crossarm at the un- marked holes bet...
