Tactical Electronics UDC 360 Manual

Summary of UDC 360

  • Page 1

    Tactical electronics.Com products / eod training / r & d / aviation design / engineering / manufacturing hemlock facility 2200 north hemlock ave / broken arrow, ok / 74012 v: 866.541.7996 / v: 918.249.8326 / f: 918.249.8328 crusader facility 2844 crusader circle / #100 / virginia beach, va / 23453 v...

  • Page 2

    2 proprietary.

  • Page 3: Udc 360

    Under door 4-camera system udc 360 3 manual contents kit identification power-up operation monitoring options specifications 3 4 5 6-9 10-15 16.

  • Page 4: Udc 360 Kit Identification

    One) under door camera 360 (4-camera system) » four cameras: forward, upward, left, and right facing cameras » internal mini dvr with sd card recording capabilities » 16gb sd card » four 0.005 lux black & white ccd chip at the distal end of insertion panel » insertion panel only 0.262” thick » ir le...

  • Page 5: Udc 360 Power Up

    * always remove batteries when not in use • the udc 360 under door camera is powered by four 3volt photo lithium batteries. Most manufacturers of these cells designate them as size 123 or cr123a. Tactical electronics systems draw high current; use only ge sanyo, energizer, or duracell batteries. Tes...

  • Page 6: Udc 360 Operation

    » operation: the udc 360 under door camera is shown (left) in proper operating position on a flat surface as if it were being slid under a door. » insertion panel: the distal tip of the udc 360 houses both the forward and upward camera lenses, the ir flood illuminator, and the microphone. The 0.005 ...

  • Page 7: Udc 360 Operation

    Outgoing channel selector 0.25in jack » hard-wire transmission: the 0.25 inch jack (shown left) is used for hard-wire operation between the udc 360 and the handheld monitor. Simply power on both the udc 360 and handheld monitor, then insert the male/male cable into the 0.25in jacks on each unit. Har...

  • Page 8: Udc 360 Operation

    Push pole attachment » telescoping push pole attachment: the udc 360 supports a telescoping push pole. The push pole is designed with a magnetic ball attachment, located at the end of the pole. To attach the push pole to the udc 360 simply place the magnetic ball onto the mount located on top of the...

  • Page 9: Udc 360 Operation

    Operation and support publication udc 360 operation 9 tactical electronics & military supply » sd card recording: insert the sd card into the sd card slot with the udc 360 powered off. Do not insert or eject the sd card with the udc 360 powered on; otherwise, recorded video files will not finalize a...

  • Page 10: Monitor Options

    • tactical electronics video systems are designed to operate interchangeably with each wireless monitor: wrist mounted monitor (wmm), handheld monitor (hhm), monocular micro viewer (mmv), heads-up display (hud), wrist mounted monitor pro (wmm pro), or handheld monitor pro (hhm pro). • each monitor i...

  • Page 11: Monitor Options

    » hhm operation the handheld monitor has a 5.0" lcd screen that displays b/w or color video transmitted directly from the camera source. It has a built-in receiver and when powered “on” automatically receives an rf video signal until a hard-wire is plugged in or the hhm is powered “off”. » hard-wire...

  • Page 12: Monitor Options

    » monocular micro viewer (mmv) the mmv is powered by one 3v lithium battery. Unscrew the battery cap [shown left] to insert the battery. The 3v lithium battery is to be inserted according to the battery orientation diagram on the mmv. Always remove batteries when not in use. The power button for the...

  • Page 13: Monitor Options

    Operation and support publication monitor options 13 tactical electronics & military supply power channel selector » heads-up display (hud) the heads-up display is powered by two 3v lithium batteries, the 3v lithium batteries are to be inserted positive ( + ) terminal first. Always remove batteries ...

  • Page 14: Pro Monitor Options

    » wrist mounted monitor pro (wmm pro) the wrist mounted monitor pro is powered by two 3v lithium batteries. The batteries are to be inserted positive (+) terminal first. The power switch for the wmm pro (left) is the top button near the battery cap. Press and hold the power button for approximately ...

  • Page 15: Pro Monitor Options

    » handheld monitor pro (hhm pro) the handheld monitor pro (hhm pro) is powered by four 3v lithium batteries, ac, or vehicle power via cigarette lighter plug. The 3v lithium batteries that are to be inserted negative ( - ) terminal first. The power switch for the hhm pro (left) is a rocker type. The ...

  • Page 16: Specifications

    Operation and support publication specifications 16 ©2013 tactical electronics and military supply, l.L.C. All rights reserved. Product specifications and information are subject to change without notice. If you encounter any problems with your system, please contact us immediately: tactical electro...