Tactical Impulse LE-1 User Manual - Battery Removal
LE-1 Flashlight – User Guide | 5
When inserted correctly, the end of the battery holder
containing seven (7) gold contacts will make contact
with the Tactical Tail-cap.
Battery Removal
The word, “PUSH”, is marked by an opening on the
backside of the battery holder near the battery’s
positive (+) terminal. To remove the battery from the
battery holder, the battery should be pushed out of
the battery holder through the marked opening.
LE-1
TM
Switch Operation
Basic On/Off – Fully depressing Switch 1 or 2 until a
“click” is heard (full-click), will power the light ON. A
subsequent full-click of Switch 1 or 2 will power the
light OFF.
Momentary – Partially depressing Switch 1 or 2 (half-
press) will result in momentary light activation (i.e.
light will only remain ON while pressure is applied to
the switch)