1. DL manuals
  2. Tado°
  3. Thermostat
  4. BU01
  5. Technical Manual

Tado° BU01 Technical Manual

Manual is about: Smart Thermostat/ Extension Kit

Summary of BU01

  • Page 1

    Manual & technical documentation v1.1 tado° smart thermostat tado° extension kit english.

  • Page 2

    Tado° – manual & technical documentation v1.1 2 product packages compatibility intelligence & security functions smart thermostat • usage • menu structure • special states • pairing & reset • interfaces • correct placement of the smart thermostat as a sensor extension box • usage • pairing & reset •...

  • Page 3

    Tado° – manual & technical documentation v1.1 1 product packages tado° smart thermostat tado° extension kit • measures temperature, humidity, noise & luminosity • displays the measured temperature and allows the adjustment of operation and set point • controls heating when wired to the heating syste...

  • Page 4

    Tado° – manual & technical documentation v1.1 2 compatibility tado° is compatible with almost all central heating systems, including: • combi, system and heat-only boilers • conventional and condensing boilers • common y-, s- and w-plan setups • hydronic underfloor systems • electric underfloor syst...

  • Page 5

    Tado° – manual & technical documentation v1.1 3 heating operations there are three different heating operations. Off: when set to off, tado° only heats when the room temperature drops below 5°c to avoid frost damage. Auto: when set to auto, tado° controls the heating based on the residents location ...

  • Page 6

    Tado° – manual & technical documentation v1.1 4 smart thermostat smart thermostat – usage usage the tado° smart thermostat has a user interface which is ac- tivated by pressing the button in the bottom right corner. First, the current temperature is displayed. The mechanical button on the bottom rig...

  • Page 7

    Tado° – manual & technical documentation v1.1 5 smart thermostat – menu structure hot water (not supported by all heating systems) shown for relay hot water systems auto operation auto operation shown for digital bus hot water systems hot water schedule operation hot water manual operation (on) hot ...

  • Page 8

    Tado° – manual & technical documentation v1.1 6 smart thermostat – special states not configured flash notifications not configured possible error states smart thermostat possible error states smart thermostat + extension kit fallback operation smart thermostat has no radio link to bridge smart ther...

  • Page 9

    Tado° – manual & technical documentation v1.1 7 reset pairing pressing and holding the button until pairing symbol flashes pressing and holding the button until the pairing symbol has appeared and turned off releasing the button waiting until successfully paired releasing the button pairing for 1 mi...

  • Page 10

    Tado° – manual & technical documentation v1.1 8 the tado° smart thermostat supports both 230v and extra low voltage interfaces. The wiring diagram on the back of the device shows the wiring for the relay operation, three isolated parking slots for excess wiring (from the thermostat which is to be re...

  • Page 11

    Tado° – manual & technical documentation v1.1 9 usage the extension box has one mechanical button and one white led that shines through the front housing. The led pulses slowly during normal operation. Tado° extension box the tado° extension box acts as a communication link between the tado° smart t...

  • Page 12

    Tado° – manual & technical documentation v1.1 10 mechanical design extension box – mechanical design contact pins jumper serial number & authentication code backplate wiring diagrams screws to fasten housing holes for wall mounting terminal blocks wall mounted backplate 2. Tighten the screws at the ...

  • Page 13

    Tado° – manual & technical documentation v1.1 11 interfaces the tado° extension box has connectors for relays (labeled 1-4) as well as analog and digital interfaces (labeled a, -, +). Two relay wiring configurations are possible and are distinguished by two different jumper positions. Jumper positio...

  • Page 14

    Tado° – manual & technical documentation v1.1 12 tado° bridge the tado° bridge is the intermediary device between the smart thermostat, the extension box (if present) and the tado° servers. It is connected to a router via an ethernet cable and communica- tes wirelessly with the smart thermostat and ...

  • Page 15

    Tado° – manual & technical documentation v1.1 13 installation warning: while self installation of the tado° system is possible, tado° strongly recommends booking a professional installation through one of our tado° installation professionals. Support for online support, please visit: support.Tado.Co...

  • Page 16

    Tado° – manual & technical documentation v1.1 14 technical specifications tado° smart thermostat (model ru01) dimensions: circa 104 x 104 x 19 mm (l x w x h) / circa 132 g operating voltage: 5-36v dc 0.2a / 4.5v dc (3xaaa batteries, 1,200 ma/h) battery life (when operating on batteries) : ~ 2 years ...