1. DL manuals
  2. TAG
  3. Server
  4. CENTRIX SV-2000-X2
  5. Operation Manual

TAG CENTRIX SV-2000-X2 Operation Manual

Manual is about: TAG Server User Manual

Summary of CENTRIX SV-2000-X2

  • Page 1

    Sv-2000-x2 server ( centrix / jhsv ) operations manual tag 22355 tag way dulles, va 20166.

  • Page 2: (Tag®)

    Operations manual sv-2000-x2 server (centrix / jhsv) part number: 1008080 page 2 of 82 version 1.4. 01/12/2010 1 copyright © 2008 technology advancement group®, inc. (tag®) all rights reserved. This publication and its contents are proprietary to tag. No part of this publication may be reproduced in...

  • Page 3: Bout Tag

    Part 2 ab 2. Tag has and has a equipme dulles, v provides manufact facilities products tag qui with spec enforced tag to r environm platforms people, e deliver to tag’s su mission our busin expectati program tag’s mis challenge • en • m • lif tag has these ten foundatio consisten number: 1 bout tag ...

  • Page 4

    Operation part 2.2 tag’s en rigorous compute prototypi met at ev ensuring to demon througho tag prid and facili invested tag to t the harsh military s and do 1 tag’s o highly a chamber test cham thermal t • f li • a • a w • d in tag imp art produ tag’s m manufac operating manufact ns manual number: ...

  • Page 5

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 5 of 82 version 1.4. 01/12/2010 technicians are cross-trained in multiple disciplines so they can be redistributed to any cell that encounters production bottlenecks, which ensures optimal efficiency. 2.2.3 lifecycle man...

  • Page 6

    Operations manual sv-2000-x2 server (centrix / jhsv) part number: 1008080 page 6 of 82 version 1.4. 01/12/2010 2.3 about tag 2.3.1 summary of qualifications. Providing engineering services and solutions for our national defense and homeland security is a responsibility that we don't take lightly. Ta...

  • Page 7

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 7 of 82 version 1.4. 01/12/2010 for in-theater survivability and communication capability over joint enterprise platforms such as dsn, gig, step, gbs, and jtrs. This includes the custom ruggedization of commercial-off-th...

  • Page 8: Document Revision History

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 8 of 82 version 1.4. 01/12/2010 document revision history date version number updated by description of changes 01/29/2008 1.0 alan huckerby author 04/10.2008 1.1 alan huckerby author 10/01/09 1.2 sean legg draft update ...

  • Page 9: About This Manual

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 9 of 82 version 1.4. 01/12/2010 3 about this manual 3.1 scope and audience this manual provides information on the sv-2000-x2 server. The rugged sv-2000-x2 server allows for up to 16 cores in a 2u chassis as well as up t...

  • Page 10: Table of Contents

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 10 of 82 version 1.4. 01/12/2010 table of contents contents 1 copyright © 2008 technology advancement group®, inc. (tag®) ........................................2 1.1 trademarks ............................................

  • Page 11

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 11 of 82 version 1.4. 01/12/2010 6.2 server shutdown ....................................................................................................................30 6.3 identifying server components using device m...

  • Page 12: List of Figures

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 12 of 82 version 1.4. 01/12/2010 list of figures figure 5-1 sv-2000-x2 (front view) ...................................................................................... 18 figure 5-2 sv-2000-x2 server components and co...

  • Page 13

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 13 of 82 version 1.4. 01/12/2010 figure 7-11 stripe size .............................................................................................................. 72 figure 7-12 read caching ...........................

  • Page 14: Chapter 1

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 14 of 82 version 1.4. 01/12/2010 chapter 1 cautions and warnings . Electronically distributed. Subject to user discretion when printed..

  • Page 15: Safety Instructions

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 15 of 82 version 1.4. 01/12/2010 4 safety instructions 4.1 types of warnings used in this manual read this manual thoroughly, paying special attention to the cautions and warnings. 4.1.1 safety symbols and labels danger ...

  • Page 16

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 16 of 82 version 1.4. 01/12/2010 capitalized and bold and is followed by text in italics. The italicized text is the warning message. 4.1.2.3 cautions cautionary messages should also be heeded to help you reduce the chan...

  • Page 17: Chapter 2

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 17 of 82 version 1.4. 01/12/2010 chapter 2 sv-2000-x2 2u server . Electronically distributed. Subject to user discretion when printed..

  • Page 18: Server Overview

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 18 of 82 version 1.4. 01/12/2010 5 server overview 5.1 product information this chapter provides an introductory overview of the tag family of rugged servers. Tag servers are highly customizable; the specific components ...

  • Page 19

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 19 of 82 version 1.4. 01/12/2010 5.2 sv-2000-x2 server all specifications detailed below are for the standardized version of the sv-2000-x2 5.2.1 specifications chassis & power supply: • 2u heavy-duty, 090inch aluminum/m...

  • Page 20

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 20 of 82 version 1.4. 01/12/2010 • low-profile dvd±rw(dl),-ram,cd-rw drive 5.2.2 additional specifications • input voltage range: 115 vrms nominal, 98 to 138 vrms (-15%, +20%) • input frequency range: 60 hz nominal, 56.4...

  • Page 21

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 21 of 82 version 1.4. 01/12/2010 5.2.4 sv-2000-x2 server figure 5-2 sv-2000-x2 server components and connectors (front view) 5.3 server components this section provides an overview of the most common components installed...

  • Page 22

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 22 of 82 version 1.4. 01/12/2010 5.4 system memory the type and amount of system memory, or ram (random access memory), on your server depends on the motherboard installed and how it was configured. 5.4.1 identifying sys...

  • Page 23

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 23 of 82 version 1.4. 01/12/2010 figure 5-3 i/o connectors 5.6 standard server components the following sections provide information on the standard system components installed on tag servers 5.6.1 floppy drives the flop...

  • Page 24

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 24 of 82 version 1.4. 01/12/2010 linear format of 704 tracks. The data is written in a serpentine pattern; the tape reverses direction after each set of eight tracks is written. This provides higher density recording, en...

  • Page 25

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 25 of 82 version 1.4. 01/12/2010 5.6.4 dual-redundant, auto-sensing power supply power for all the equipment in the system is a dual redundant, hot-swap ac input power supply with an input ac voltage range of 115 vrms no...

  • Page 26

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 26 of 82 version 1.4. 01/12/2010 figure 5-7 hot-swap power supply note : if your server has two power input receptacles, then the server is equipped with a redundant hot-swap power supply..

  • Page 27

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 27 of 82 version 1.4. 01/12/2010 5.7 pci i/o expansion cards the following sections provide an overview of the pci i/o components that may be included with your server. For detailed information on these components, refer...

  • Page 28

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 28 of 82 version 1.4. 01/12/2010 5.7.2 adaptec 29320 alp-r scsi controller the adaptec scsi card 29320alp-r is a low profile, 64-bit 133 mhz pci-x, single-channel ultra320 scsi card with integrated hostraid® raid 0, 1 an...

  • Page 29: Chapter 3

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 29 of 82 version 1.4. 01/12/2010 chapter 3 procedures electronically distributed. Subject to user discretion when printed..

  • Page 30: Procedures

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 30 of 82 version 1.4. 01/12/2010 6 procedures the procedures within this chapter contain relevant information to ensure your sv-2000- x2 server maintains its maximum performance potential. 6.1 server startup 1. Check to ...

  • Page 31

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 31 of 82 version 1.4. 01/12/2010 1. Click start , point to settings , and then click control panel . (figure 6-1). Figure 6-1 control panel 2. Double-click the system icon. (figure 6-2). Figure 6-2 system properties.

  • Page 32

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 32 of 82 version 1.4. 01/12/2010 3. Click the hardware tab, and then click the device manager button. (figure 6-3). Figure 6-3 device manger after opening device manager, you will see a list of all the devices windows de...

  • Page 33

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 33 of 82 version 1.4. 01/12/2010 the devices shown represent the computer's current hardware configuration information. Any non-functioning devices are displayed with an exclamation point, indicating that a problem exist...

  • Page 34

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 34 of 82 version 1.4. 01/12/2010 2. In the device manager dialog box (figure 6- 5).Double-click the device, or select the device and then click the properties toolbar button figure 6-5 properties dialog box in the device...

  • Page 35

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 35 of 82 version 1.4. 01/12/2010 driver. The resources tab displays the hardware resources being used. This tab allows you to see and resolve any conflicts caused by non-pnp devices. Along with these tabs, some devices h...

  • Page 36

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 36 of 82 version 1.4. 01/12/2010 1. From the start menu, point to settings and then click control panel . (figure 6-6). Figure 6-6 control panel 2. Double-click the add hardware icon. (figure 6-7). Figure 6-7 add hardwar...

  • Page 37

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 37 of 82 version 1.4. 01/12/2010 6.6 installing legacy peripherals when you install what microsoft calls a legacy peripheral, you will need to use the add hardware wizard, as described “ error! Reference source not found...

  • Page 38

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 38 of 82 version 1.4. 01/12/2010 2. Double-click the system icon. (figure 6-9). Figure 6-9 system properties 3. Click the hardware tab..

  • Page 39

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 39 of 82 version 1.4. 01/12/2010 4. Click the device manager button. (figure 6- 10). Figure 6-10 device manger 5. Click the name of the item you have removed from your system. If you don't see the item, look for a catego...

  • Page 40

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 40 of 82 version 1.4. 01/12/2010 6.7 tag approved bios the bios (basic input/output system) is the program stored on the cmos that the server's microprocessor uses to get the system started after you turn it on. The bios...

  • Page 41

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 41 of 82 version 1.4. 01/12/2010 com1/com2/com3/com4 to serial port 1 or 2. Most bios' also allow you to set the i/o and irq but this is mostly done automatically. 6.7.1.3 floppy drives the floppy drive(s) can be enabled...

  • Page 42

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 42 of 82 version 1.4. 01/12/2010 size - determines the capacity of the drive chs values: • number of cylinders • number of heads • number of sectors • lba (large block addressing)-technology to overcome the 528 mb limit ...

  • Page 43

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 43 of 82 version 1.4. 01/12/2010 the computer will prompt for it when you try to access the bios setup. When a startup password is configured, the computer will prompt for it at every startup. The cmos password can be re...

  • Page 44

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 44 of 82 version 1.4. 01/12/2010 6.8 bios configuration for sv-2000-x2 1. Press f2 to access the main bios page . On the main page , select quiet boot then select enable and press enter . (figure 6-11). Figure 6-11 quiet...

  • Page 45

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 45 of 82 version 1.4. 01/12/2010 2. Back at the main screen press f9 . On the drop down menu select and press yes . (figure 6-12). Figure 6-12 load optimized defaults.

  • Page 46

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 46 of 82 version 1.4. 01/12/2010 3. In the advanced menu scroll down and select enhanced intel press enter . (figure 6-13). Figure 6-13 enhanced intel.

  • Page 47

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 47 of 82 version 1.4. 01/12/2010 4. In the enhanced intel drop down menu select disable and press enter. . (figure 6-14). Figure 6-14 enhanced intel, disable.

  • Page 48

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 48 of 82 version 1.4. 01/12/2010 5. In processor confirmation screen select deep c-state support and press enter . (figure 6-15). Figure 6-15 processor confirmation screen.

  • Page 49

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 49 of 82 version 1.4. 01/12/2010 6. In deep c-state support screen select disable and press enter . (figure 6-16). Figure 6-16 deep c-state support screen.

  • Page 50

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 50 of 82 version 1.4. 01/12/2010 7. In processor confirmation screen select intel virtualization technology and press enter . (figure 6-17). Figure 6-17 usb configuration.

  • Page 51

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 51 of 82 version 1.4. 01/12/2010 8. In intel virtualization technology drop down menu select enabled and press enter . (figure 6-18). Figure 6-18 intel virtualization technology.

  • Page 52

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 52 of 82 version 1.4. 01/12/2010 9. In processor confirmation screen drop down menu save and reset select yes and press f10 . (figure 6-19) figure 6-19 save and reset.

  • Page 53

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 53 of 82 version 1.4. 01/12/2010 6.9 upgrading memory and replacing hot-swap and lru components 6.9.1 preventing static electricity this section provides procedures for replacing all hot-swappable and lru components, inc...

  • Page 54

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 54 of 82 version 1.4. 01/12/2010 • remove components from their antistatic bags only when you are ready to use them. Do not lay components on the outside of antistatic bags because only the inside of the bags provide ele...

  • Page 55

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 55 of 82 version 1.4. 01/12/2010 figure 6-21 hot-swap of 2u server power supply module 5. Slide the replacement module into the power supply . 6. Press firmly and evenly on the power module until you feel the module seat...

  • Page 56

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 56 of 82 version 1.4. 01/12/2010 6.11.1 146gb sas hard drive figure 6-22 146gb sas hdd (removed from hd carrier) 6.12 removing the server cover the location of the mounting screws securing the server cover varies per ser...

  • Page 57: Unlatch Both Dimm Socket

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 57 of 82 version 1.4. 01/12/2010 warning ensure that the system is powered-down and all power sources have been disconnected from the server prior to removing or replacing system memory. Failure to do so could result in ...

  • Page 58

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 58 of 82 version 1.4. 01/12/2010 figure 6-23 dimm module bank 1. Note the location of the alignment notch. 2. Align the notches on the new module with the notches on the memory and press it firmly into the bank. Note: th...

  • Page 59

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 59 of 82 version 1.4. 01/12/2010 6.15 ultrium 920 tape drive the ultrium 920 delivers a compressed storage capacity of 800gb per data cartridge and a compressed data transfer rate of 432gb per hour. The ultrium 920 tape ...

  • Page 60

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 60 of 82 version 1.4. 01/12/2010 9. Slide the cover end of the new tape drive under the servers top cover and tighten all four 94) thumb screws. 10. Restore all power cables to their power source. .Power up the server an...

  • Page 61: Chapter 4

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 61 of 82 version 1.4. 01/12/2010 chapter 4 raid . Electronically distributed. Subject to user discretion when printed..

  • Page 62: Raid

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 62 of 82 version 1.4. 01/12/2010 7 raid raid is an acronym for redundant array of inexpensive (or independent) disks. This section provides a high-level overview that defines raid, the advantages and disadvantages of var...

  • Page 63

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 63 of 82 version 1.4. 01/12/2010 7.1.1 raid level 5 raid level 5 maps the data across the drives and stores parity information for each data stripe on different drives in the array. The parity data, labeled p in figure ,...

  • Page 64

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 64 of 82 version 1.4. 01/12/2010 7.2 create a raid 5 array on adaptec 5805 1. Power up your computer. When prompted, press ctrl a to enter the arc utility. Note: during boot up, if your system has insufficient memory the...

  • Page 65

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 65 of 82 version 1.4. 01/12/2010 3. Select initialize drives , and then press enter . (figure 7-2). Figure 7-2 initialize drives 4. Select initialize all hard drives for the array, press insert for each selected disk dri...

  • Page 66

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 66 of 82 version 1.4. 01/12/2010 figure 7-3 select drives 5. During initialization, all data is deleted from the disk. Before continuing back up any data you want to keep. (figure 7-4). Figure 7-4 initialization warning ...

  • Page 67

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 67 of 82 version 1.4. 01/12/2010 8. On the acu screen select create array from the main menu and press enter . (figure 7-6). Figure 7-6 create array.

  • Page 68

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 68 of 82 version 1.4. 01/12/2010 9. Select the first five (5) hard drives that were just initialized, press insert for each selected disk drive, then press enter . (figure 7-7). Figure 7-7 select drives.

  • Page 69

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 69 of 82 version 1.4. 01/12/2010 10. In array type select raid 5 press enter . (figure 7-8). Figure 7-8 raid 5.

  • Page 70

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 70 of 82 version 1.4. 01/12/2010 11. In array label type a name and press enter . (figure 7-9). Figure 7-9 array label.

  • Page 71

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 71 of 82 version 1.4. 01/12/2010 12. Array size press enter , then press enter again to use the default granularity of gb. (figure 7-10). Figure 7-10 array size.

  • Page 72

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 72 of 82 version 1.4. 01/12/2010 13. In stripe size scroll down and select (25 kb). (figure 7.11). Figure 7-11 stripe size.

  • Page 73

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 73 of 82 version 1.4. 01/12/2010 14. In read caching scroll down and select enable max id . (figure 7-12). Figure 7-12 read caching.

  • Page 74

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 74 of 82 version 1.4. 01/12/2010 15. In cache warning press enter . (figure 7- 13). Figure 7-13 cache functionality.

  • Page 75

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 75 of 82 version 1.4. 01/12/2010 16. In write caching select disable and press enter . (figure 7-14). Figure 7-14 write caching.

  • Page 76

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 76 of 82 version 1.4. 01/12/2010 17. In create raid select ( build/verify ) and press enter . (figure 7-15). Figure 7-15 build/verify.

  • Page 77

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 77 of 82 version 1.4. 01/12/2010 18. Press enter to continue. (figure 7-16). Figure 7-16 press enter.

  • Page 78

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 78 of 82 version 1.4. 01/12/2010 19. When a cache warning message displays, type y . (figure 7-18). Figure 7-17 cache warning.

  • Page 79

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 79 of 82 version 1.4. 01/12/2010 20. Check that a global hotspare is available. (figure 7.18). Note: ensure you have previously only selected five (5) of the available six (6) drives this will ensure you have a hot spare...

  • Page 80

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 80 of 82 version 1.4. 01/12/2010 22. Press escape . The exit utility window will appear. Select yes and press enter . (figure 7-19). Figure 7-19 exit utility 23. Your computer restarts.

  • Page 81

    Operations manual sv-2000-x2 server (centrix / jhsv ) part number: 1008080 page 81 of 82 version 1.4. 01/12/2010 7.3 about raid global and hot spares a hot spare is a drive that is on standby in case another drive fails. Depending on how the array is configured, the drive is either picked up automat...

  • Page 82

    Contact 7.4.1 22355 tag way dulles, va 20166 tel: 1-800-824-8693 www.Tag.Com technical support usa 1-800-tag-tech outside usa while every precaution has been taken to ensure the accuracy and completeness of this literature. Tag assumes no responsibility and disclaims and liability for damage resulti...