TAG HDIT 850D-36M Reference Manual - page 5
5
Front Panel - Power & Reset Switches
The HDIT-850D-36M features 2 switches mounted centrally on the front panel.
To power up the HDIT-850D-36M, press hold the power switch. The Power LED
(green) will then glow indicating power is being supplied to the unit.
NOTE: If the unit does not power up, check the power connections
and the main power switch on the back panel below the power
supply.
The second switch is the system reset switch. Press the switch to reset the HDIT-
850D-36M, (See Figure 1).
2
Rear Panel - Power Supply
Situated on the back of the HDIT-850D-36M is an Auto-Switching 115/
230VAC power supply, (See Figure 5). The system main power switch is located
just beneath the power supply’s cooling fan. Turn off the main power switch and
remove the power cord from the HDIT-850D-36M before servicing or moving the
unit.
Rear Panel - Power Supply Specifications
INPUT: 115/230VAC
60/50Hz
10/5A
OUTPUT: 300W (Total Combined MAX)
(+5V/+3.3V Total MAX 140W)
OUTPUT:
+5VDC @ 30A
+12VDC @ 14A
-5VDC @ 0.3A
-12VDC @ 1.0A
+3.3VDC @ 22A
+5VDC @ 0.2A
Figure 1
Figure 5