TAG Heuer CALIBRE 16 Instruction Manual - Position 3: Time Correction
7
Warning: do not change the date and day* between 8 p.m. and 2 a.m. Attempting to use the rapid
date correction during this period could damage the calendar mechanism.
Position 3: Time correction
Turn the crown forwards or backwards according to the desired correction.
Important: to preserve your watch’s water-resistance, always push the crown back into position 1,
and screw it back into position 0* after all the settings.
*According to model
SINGLE TIMING
Caution: Before each timing, the hands must be at zero. If necessary, press button
B
.
1. Start:
button
A
(START)
2. Stop:
button
A
(STOP)
> Time read-out
3. Reset to zero:
button
B
CUMULATIVE TIMING
This function measures several consecutive times, adding them to give the total measured time.
Caution: Before each timing, the hands must be at zero. If necessary, press button
B
.
1. Start 1st time:
button
A
(START)
2. Stop 1st time:
button
A
(STOP)
> Read 1st time
3. Start 2nd time:
button
A
(START)
4. Stop 2nd time:
button
A
(STOP)
> Read 1st and 2nd times, etc.
5. Reset to zero:
button
B