1. DL manuals
  2. TAG Heuer
  3. GPS
  4. DOCKING GPS – GSM
  5. User Manual

TAG Heuer DOCKING GPS – GSM User Manual

Manual is about: DOCKING GPS – GSM

Summary of DOCKING GPS – GSM

  • Page 1

    ______________________________ p r o f e s s i o n a l t i m i n g docking gps – gsm user manual version 07/2012.

  • Page 2

    1. General  the gps docking is equipped with a li-ion accumulator ensuring exceptional autonomy for the chronoprinter 540, even at very low temperatures (-20°c / -4° f).  a satellite detection module « gps » ensures the automatic time of day synchronization and precision control.  a gsm communica...

  • Page 3

    2. Important recommendation  to guarantee the security of your timekeeping, it is necessary to use your cp 540 with the internal batteries in a charged state  do not forget to charge the docking before its use (see « how to charge the docking »)  if the system is not used for several days, we rec...

  • Page 4

    4. How to use gps  carefully connect the gps antenna cable in the socket (21). The gps antenna must be installed in a clear open place (outdoor) with an unobstructed view of the sky in order to correctly receive the satellite signals generated by the gps system.  menu gps (on/off) o select gps on ...

  • Page 5

    5. Remarks on gps ► if gps signal is lost (poor positioning of the antenna), the printer indicates: - synchro gps lost - the time of day the display time of day will flicker along with gps lost . If the gps signal is synchronized again, the printer indicates (repositioning of the antenna) - gps acti...

  • Page 6

    6. How to use the gprs transmission attention the sim card should not have pin number. Please disable any sim pins via your sim provider instructions . 6.1. Software setup in order to set all connection information into your device. Connect your chronoprinter 540 on your laptop and fire up the softw...

  • Page 7

    - 1) the acces point: this information is provided by your mobile broadband supplier. Here are some example below (note that they can change anytime). Please refer to your sim card supplier or phone dealer. - 2) the server: if you use the gprs server provided by tag heuer professional timing, the fo...

  • Page 8

    6.2. Gprs computer interface fire up “gprs interface_vx.X.X.Exe” this software should run on the background (local machine) as the timing software. Software id number: computer id set on the server server address: gprstiming.Com server port: 13000 user name and password: your personal account id 6.3...

  • Page 9

    How to insert the sim card in the docking use a standard sim card (annual subscription) or with pre-payment. To guarantee a bidirectional communication between cp 540’s, it is necessary to have two gsm docking stations, with sim cards with a different telephone number. Proceed to the following steps...

  • Page 10

    7. Information  the gsm – gps docking has « banana » output connector to provide a signal top-minute which is useful to synchronize other timing systems.  if the gps is used only for the cp 540, it is recommended to wait 4 – 5 mins before to switching it off (« memorize » the gps precision)  the ...

  • Page 11

    8. How to charge the docking accumulator  the docking can be charged seperately or connected to a cp 540.  charge the docking with the power supply hl 540-1 from the cp 540  connect the power supply to the power connector of the docking (connector 3 poles).  the led located at the bottom of the ...

  • Page 12

    9. Technical specification general o operating condition -20°c to +60°c o external power supply 12vdc o top minute output (optocoupler) o connector in / out for master / slave (2 x rj13) accumulator o type 7.4v li-po 2700mah o charging condition 0° to +40°c o charging current 500ma (~5.5 hours) gps ...

  • Page 13

    Tag heuer professional timing 6a louis-joseph chevrolet 2300 la chaux-de-fonds switzerland tel : 032 919 8000 fax : 032 919 9026 e-mail: info@tagheuer-timing.Com http: //www.Tagheuer-timing.Com.