TAG MCLAREN AUDIO PPA20 User Manual - page 16
The only service you should do to your PPA20 is described on the
left. All other servicing should only be carried out by one of our
authorised service agents.
If service is required, please contact your authorised TAG
McLaren Audio retailer. If your PPA20 is still under guarantee,
please refer to the guarantee card which gives you details on
how to claim against the guarantee.
Please keep the original packaging and use it whenever your
PPA20 is transported.
service
30
care and maintenance
1. You cannot open the fuse carrier drawer while the plug is in the socket
There is a fuse in the power socket on the back of your PPA20.
To change the fuse, unplug the power cable and pull out the fuse
carrier drawer
(1)
.
The fuse carrier contains a spare fuse; this is the first one that you
see when you open the carrier.
There are no other user- serviceable parts inside the PPA20.
In order to maintain the appearance of your PPA20, you can
clean it as follows:
before cleaning, always disconnect your PPA20 from the AC
supply.
any grease or dirt on the case may be removed with a soft,
lint-free cloth moistened slightly with a mild solution of warm
water and detergent or washing-up liquid. Do not use any
other solutions. Do not use any solvents or abrasives.
take great care not to get any liquid inside the case.
If this happens, you should have your PPA20 serviced.
care and maintenance
31
fuses
cleaning
GRA00046.1-[CA]PPA20 13/03/01 11:31 Page 31