TAGSYS RFID L-SA4 SHD User Manual - 2 Certification
L-SA4 SHD Antenna User's Guide
August 2010
Revision 1.1
9/23
2 Certification
2.1
Occupational Health and Safety Notices
TAGSYS Products have been designed not to exceed the limits given in the European Standard
EN 50364 “Limitation of human exposure to electromagnetic fields from devices used in Electronic
Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications” in
conjunction with the European Standard EN 50357 describing how to evaluate the exposure level.
It is the responsibility of the TAGSYS Partner to install the L-SA4 SHD Antenna as described in
TAGSYS Product Manuals or TAGSYS Documentation and with the appropriate antennas.
Modification of any TAGSYS System is prohibited without the written consent of TAGSYS.
Unauthorized modifications may void the conformity of the equipment to safety norm and will void
the TAGSYS warranty.
An RF field’s survey has been carried out on all the System components, in accordance with
AS/NZS 2771.1: Radio Frequency Radiation, Part 1. According to this standard the maximum
allowable RF exposure levels (non-occupational) at 3 kHz to 300 GHz are 200 µW/cm2.
2.2
Regulatory Notices
An RFID system typically composed of an RF emission device such as the L-SA4 SHD Antenna is
subject to national regulations that may differ by country.
One important item to consider is the maximum permissible magnetic field intensity at a distance of
10 meters from the antenna that must not exceed 42 dBµA/m in Europe and 38 dBµA/m in US.
The L-SA4 SHD Antenna meets these limits.
2.2.1 In Europe (CE and RTTE Directives)
The L-SA4 SHD Antenna complies (CE Declaration of Conformity granted) with the European EMC
directive.
The L-SA4 SHD Antenna complies with the requirements of the Telecommunication Terminal
Equipment Act (FTEG) and the RTTE Directive 1995/5/EC.
Any modification of the L-SA4 SHD Antenna is prohibited without the written consent of TAGSYS.
Unauthorized modifications may void the conformity of the equipment to CE and RTTE Directives
and will void the TAGSYS warranty.
2.2.2 In USA (FCC Directive)
The L-SA4 SHD Antenna has been designed to comply with Part 15 of the FCC Rules when used
with L-P101 and Medio P200L readers. The certified base configuration is L-SA4 SHD Antenna
It is the responsibility of the TAGSYS Partner to install the L-SA4 SHD Antenna as described
in this User's Guide or in TAGSYS Documentation.
If a L-SA4 SHD Antenna is further integrated in a different product, it is the responsibility of
the manufacturer of this complementary product to obtain the required approvals for this
product.