Taikan OT-860-1550-xx-SA-x-x User Manual - // Operation
ON/OFF KEY BUTTON
After powering on the transmitter from the back panel, press the On/Off button to activate the
transmitter.
SECTION THREE
// OPERATION
1
Tai
kan
//
919 E. 29th St. Lawrence, KS 66046
//
tel: 1-800-255-0247
//
fax: 785-841-9512
//
email: support@taikan.com
//
www.taikan.com
1550nm Transmitter | 11
STATUS INDICATOR ( A GREEN LIGHT DENOTES ACTIVITY)
>
Laser – Laser status
>
RF – RF status
>
Temp – System temperature
>
Power 1 – Furthest power outlet on the back panel
>
Power 2 – 2nd power outlet on the back panel
2
DISPLAY
LCD displays selected menu items and warnings.
3
STATUS LAMPS SHOULD REFLECT THE FOLLOWING
>
Laser – Green
>
RF – Green
>
Temp. – Green
>
Power – Green
2
ACCESSING THE MAIN MENU
To access the Main Menu, use the arrow buttons on the front panel and toggle through the
options listed on the next page.
3
ACCESSING THE SUB MENU
To access the Sub Menu stop on the main menu topic you would like to view and press the
‘Select’ button.
To exit out of the Sub Menu press the select button a 2nd time. Please note that pressing the
‘Select’ button a second time saves the changes you have made.
4
START UP
TURN ON THE POWER SWITCH ON THE REAR PANEL
Turn the optical power on from the front panel On/Off key. Wait a few seconds for the transmitter
to do a self check. After the check is complete the screen will display a welcome message with the
product model indicated.
1
DIRECTIONAL ARROWS
Select these buttons to toggle through each main menu category. ▲ ▼
4
SELECT BUTTON
Press the button once to toggle through the various subcategories. Press it again to select the
setting you would like and return to the main menu.
5
OMI, AGC & MGC STATUS INDICATOR
>
AGC – Automatic gain control
>
MGC – Modulation gain control
>
OMI – Optical modulation intensity
6
MODULATION DEPTH INDICATOR LIGHT
7
RF TEST PORT
8
MENU DEFINITIONS*
>
Main
Menu
– Default
Description
>
Descriptor
– Equipment
model
>
Serial
Number
– 438292F
>
Model
Number
– 10020476
>
Output
1
– Displays
current
output
>
Output
2
– Displays
current
output
>
LD
S/N
– 204188
>
Laser Current – 00mA
>
Laser
Temperature
– 24.6
°C
>
TEC
Current
– 0.09
A
>
RF Mode
–
AGC (press ‘Select’ to change and toggle through the options)
>
OMI Adjust
–
0.5 dBm (press ‘Select’ to change and toggle through the options)
>
RF
Level
– OK
>
SBS
– OK
>
SBS
State
– OK
>
CSO
State
– OK
>
Date
– Displays
date
>
Version
– 08.05
>
System
Temperature
– Refl ects current temperature
>
Voltage Monitors (5,-5,24V)
–
-5, 5, 24V
>
IP
– 192.168.000.012
>
Sub
– 255.255.255.000
>
GW
– 192.168.000.001
>
TR1
– 192.168.006.144
>
TR2
– 192.168.006.144
5
*Information above is for reference only. The data will vary by unit.