Operator’s manual t2040 series ii t2040 ii.
02/99 ipn: 409-20400-02.
02/99 ipn: 409-20400-02 1 tait electronics limited software licence agreement this legal document is an agreement between you, (the “licencee”) and tait electronics limited (“tait”). By opening this product pack- age and/or using the product you agree to be bound by the terms of this agreement. If y...
2 02/99 ipn: 409-20400-02.
02/99 ipn: 409-20400-02 3 contents introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 safety warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 t2040ii controls and in...
4 02/99 ipn: 409-20400-02 trunking call set up and special functions . . . . . . . . . . . . . . . . . . . . . . . 21 most common trunking call setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 mpt1343 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
02/99 ipn: 409-20400-02 5 introduction the tait t2040ii radio is a state-of-the-art mobile radio that provides outstanding communi- cation flexibility in both conventional and trunked mobile radio systems. The t2040ii is micro- processor controlled which allows it to be configured to suit your perso...
6 02/99 ipn: 409-20400-02 t2040 ii controls and indicators the t2040ii control head includes the following keys and indicators: keypad functions the keypad functions are as follows: despatcher short press : accesses a preset number (usually your base despatcher). This is a one touch dialling key. Lo...
02/99 ipn: 409-20400-02 7 keypad indicators display window indicators the lcd window provides you with direct visual access to information and messages about the status of your calls and your radio. Note: your t2040ii has the ability to display messages in languages other than english. This option i...
8 02/99 ipn: 409-20400-02 svc service this indicator has three functions: on : your radio has access to a network and is ready to make or accept calls. Flashing : your radio does not currently have access to a network. It is attempting to find a site it is authorised to use, or it may be out of rang...
02/99 ipn: 409-20400-02 9 basic operations switching the radio on and off switch the radio on by rotating the volume knob clockwise to about one third of its maximum setting. You will feel a click as the knob leaves the ‘off’ position. The control head display then shows a power-up message. Switch t...
10 02/99 ipn: 409-20400-02 making a call there are four different ways of making a call using your t2040ii: 1 enter the full number of the required party using the alphanumeric keypad and then press either the hash key ( ) or ptt key to send the call. 2 enter short dial preset numbers using the alph...
02/99 ipn: 409-20400-02 11 requesting a call from your despatcher note: your radio needs to be programmed to call your despatcher for this function to operate. Press the despatcher key ( ). If the call is accepted, you hear a single high-pitched tone, peeeeee , lasting three seconds. This places you...
12 02/99 ipn: 409-20400-02 receiving a call when you receive an incoming call, your radio alerts you with a ringing tone like a telephone and the identity of the calling party is displayed, as follows: depending on your network and how your t2040ii is programmed, you can respond to the call as follo...
02/99 ipn: 409-20400-02 13 last incoming caller re-establish a call to your last incoming caller as follows: note: this option must be enabled during radio programming. 1 when an incoming call that you have accepted is terminated, the call-back facility stores the caller’s number in a special memory...
14 02/99 ipn: 409-20400-02 advanced user operations many of the advanced operations detailed in this section must be enabled during program- ming of the t2040ii. Consult your tait dealer to find out which of these features have been enabled in your radio. Alphanumeric entry mode your t2040ii can be ...
02/99 ipn: 409-20400-02 15 call queuing if you need to leave your t2040ii unattended, incoming calls can be saved as ‘call-back’ messages for you to return later. All calls except group calls, pabx and pstn calls can be queued, as follows: 1 enter ð ð ð ð48õ õ õ õ using the keypad, or keep the despa...
16 02/99 ipn: 409-20400-02 despatcher operation the t2040ii may be used for despatcher operation, mounted on top of its companion t2008 power supply, as shown below. Note: if your t2040ii is to be used as a despatcher, this must be enabled during programming. 1 the radio powers up in despatcher mode...
02/99 ipn: 409-20400-02 17 2 to clear ‘do not disturb’, enter õ õ õ õ49õ õ õ õ using the keypad, or press the clear key ( ). The “ quiet ” message is removed, and the radio returns to the mode it was in previously. Note: with ‘do not disturb’ enabled, it is still possible to make calls by dialling n...
18 02/99 ipn: 409-20400-02 sdm entry mode give a long press of the status key ( ) to enter sdm entry mode. The status indicator flashes intermittently and the last message sent is displayed, flashing. If you have not sent an sdm before, a cursor flashes on the right-hand side of the display. The sdm...
02/99 ipn: 409-20400-02 19 ◆ the currently selected character can be deleted from the message by pressing the clear key ( ). Using alphanumeric entry mode alphabetic characters can be included in the sdm as follows: 1 press the alphanumeric key ( ) to enter alphanumeric entry mode. While alphanumeri...
20 02/99 ipn: 409-20400-02 2 manually, by giving a long press of the status key ( ). Sdm entry mode is exited, the status indicator turns off and the display shows the most-recently transmitted valid call. Any unsent message is discarded. 3 automatically, if the ‘do not disturb’ function is not acti...
02/99 ipn: 409-20400-02 21 trunking call set up and special functions some of the functions listed below may be unavailable on your network, and some may need to be enabled during radio programming. For more information about the facilities available on your radio, consult your tait dealer. Note: th...
22 02/99 ipn: 409-20400-02 most common special trunking functions 1 “ ð ð ð ð ... õ õ õ õ ” functions: 2 “ õ õ õ õ ... õ õ õ õ ” functions: dialling code function example ð ð ð ð0õ õ õ õ request base despatcher callback ð ð ð ð0õ õ õ õ ð ð ð ð0ð ð ð ðnnnõ õ õ õ request another despatcher callback ð ...
02/99 ipn: 409-20400-02 23 optional accessories for t2040 ii radios the following accessories are available for use with your t2040ii radio: ◆ t2008 desk-top mains power supply ◆ remote speaker ◆ dtmf microphone ◆ desk-top microphone ◆ six metre remote mounting kit ◆ ctcss kit ◆ scrambler kit ◆ hand...
24 02/99 ipn: 409-20400-02 appendix maintenance the t2040ii requires no regular maintenance, other than ensuring that all cables and connec- tions are secure, and that no damage has occurred to the antenna or wiring. Troubleshooting if the front panel indicators do not light up when the radio is tur...
