1. DL manuals
  2. Tait
  3. Test Equipment
  4. TB7100
  5. Operation Manual

Tait TB7100 Operation Manual

Summary of TB7100

  • Page 1

    Tb7100 base station tb8100 base station tb9100 base station tba0stu / tba0stp calibration and test unit operation manual mba-00013-01 issue 1 september 2005.

  • Page 2: Tait Contact Information

    2 tba0stu/tba0stp ctu operation manual © tait electronics limited september 2005 tait contact information tait radio communications corporate head office tait electronics ltd p.O. Box 1645 christchurch new zealand for the address and telephone number of regional offices, refer to the taitworld websi...

  • Page 3: Contents

    Tba0stu/tba0stp ctu operation manual 3 © tait electronics limited september 2005 contents preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 scope of manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 4: Preface

    4 tba0stu/tba0stp ctu operation manual © tait electronics limited september 2005 preface scope of manual this manual provides information on using the tba0stu/tba0stp base station calibration and test unit (ctu) with a tait base station. It describes the input and output connectors and controls avai...

  • Page 5: Document Conventions

    Tba0stu/tba0stp ctu operation manual 5 © tait electronics limited september 2005 document conventions within this manual, four types of alerts are given to the reader: warning, caution, important and note. The following paragraphs illustrate each type of alert and its associated symbol. Warning!! Th...

  • Page 6: Publication Record

    6 tba0stu/tba0stp ctu operation manual © tait electronics limited september 2005 publication record issue publication date description 1 september 2005 first release.

  • Page 7: Introduction

    Tba0stu/tba0stp ctu operation manual introduction 7 © tait electronics limited september 2005 1 introduction the base station calibration and test unit (ctu) is designed to make it easier to connect a tait base station to standard test equipment, and to a pc running the appropriate programming and c...

  • Page 8

    8 introduction tba0stu/tba0stp ctu operation manual © tait electronics limited september 2005.

  • Page 9: Modification History

    Tba0stu/tba0stp ctu operation manual modification history 9 © tait electronics limited september 2005 2 modification history this chapter provides details about any production modifications made to the ctu that may affect its performance, or the way in which it interacts with the tb7100, tb8100 or t...

  • Page 10

    10 modification history tba0stu/tba0stp ctu operation manual © tait electronics limited september 2005.

  • Page 11: Using The Ctu With A Tb7100

    Tba0stu/tba0stp ctu operation manual using the ctu with a tb7100 11 © tait electronics limited september 2005 3 using the ctu with a tb7100 the ctu provides a selection of input and output connectors that allow the tb7100 base station to be connected to standard test equipment. These inputs, outputs...

  • Page 12

    12 using the ctu with a tb7100 tba0stu/tba0stp ctu operation manual © tait electronics limited september 2005 figure 3.1 ctu connections and controls b 1! C d e f g h i j 1@ 1# 1$ 1% 1& 1* 1( 2) 2! 2@ 2# top view rear view 1^ 1).

  • Page 13

    Tba0stu/tba0stp ctu operation manual using the ctu with a tb7100 13 © tait electronics limited september 2005 tb7100 tb8100 tb9100 b not used programming port serial port b c power led power led power led c d not used noise source output and on/off switch noise source output and on/off switch d e ba...

  • Page 14

    14 using the ctu with a tb7100 tba0stu/tba0stp ctu operation manual © tait electronics limited september 2005 ioioi not used with tb7100. Power the power led is lit when the ctu is powered up. The tb7100 system interface provides power to the ctu over the 25-way system interface connector 1! (see al...

  • Page 15

    Tba0stu/tba0stp ctu operation manual using the ctu with a tb7100 15 © tait electronics limited september 2005 digital/ programming inputs these switches let you set the digital inputs into the tb7100 high or low, and are connected to the digital inputs on the system interface connector. Switches 1 t...

  • Page 16

    16 using the ctu with a tb7100 tba0stu/tba0stp ctu operation manual © tait electronics limited september 2005 figure 3.2 example ctu connection to a tb7100 25-way cable tb7100 ctu adaptor board power system interface to pc running programming or calibration application t2000-a19 programming lead plu...

  • Page 17

    Tba0stu/tba0stp ctu operation manual using the ctu with a tb7100 17 © tait electronics limited september 2005 the tb7100 ctu adaptor board you must use the tb7100 ctu adaptor board when connecting a tb7100 base station to the ctu. The ctu adaptor board plugs into the 25-way system interface connecto...

  • Page 18

    18 using the ctu with a tb7100 tba0stu/tba0stp ctu operation manual © tait electronics limited september 2005 note you can also use the tb7100 ctu adaptor board with the earlier tba0st1 and tba0stp ctus (using the supplied 25-way cable). As the adaptor board was not supplied with these ctus, you can...

  • Page 19: Using The Ctu With A Tb8100

    Tba0stu/tba0stp ctu operation manual using the ctu with a tb8100 19 © tait electronics limited september 2005 4 using the ctu with a tb8100 the ctu provides a selection of input and output connectors that allow the tb8100 base station to be connected to standard test equipment, and also to a pc runn...

  • Page 20

    20 using the ctu with a tb8100 tba0stu/tba0stp ctu operation manual © tait electronics limited september 2005 figure 4.1 ctu connections and controls b 1! C d e f g h i j 1@ 1# 1$ 1% 1& 1* 1( 2) 2! 2@ 2# top view rear view 1^ 1).

  • Page 21

    Tba0stu/tba0stp ctu operation manual using the ctu with a tb8100 21 © tait electronics limited september 2005 tb7100 tb8100 tb9100 b not used programming port serial port b c power led power led power led c d not used noise source output and on/off switch noise source output and on/off switch d e ba...

  • Page 22

    22 using the ctu with a tb8100 tba0stu/tba0stp ctu operation manual © tait electronics limited september 2005 ioioi this is an rs-232 serial port. Connect it to a pc running the service kit or calibration kit software when calibrating or tuning the base station. You must also connect a system contro...

  • Page 23

    Tba0stu/tba0stp ctu operation manual using the ctu with a tb8100 23 © tait electronics limited september 2005 ub input this input is connected to the unbalanced line input on the system interface connectors. Note in august 2005, the unbalanced input on the ctu was changed from dc to ac coupled. Refe...

  • Page 24

    24 using the ctu with a tb8100 tba0stu/tba0stp ctu operation manual © tait electronics limited september 2005 note the complete lists of pin allocations for each system interface board are provided in the installation guide, installation and operation manual, or service kit (configure > base station...

  • Page 25

    Tba0stu/tba0stp ctu operation manual using the ctu with a tb8100 25 © tait electronics limited september 2005 speaker the ctu is fitted with a 0.5w 16Ω speaker. Audio from line output or ub output can be connected to this speaker. Volume this controls the volume of the speaker. Rotate clockwise to i...

  • Page 26

    26 using the ctu with a tb8100 tba0stu/tba0stp ctu operation manual © tait electronics limited september 2005 important do not power the ctu from a pmu fitted with a 48v auxiliary power supply board. The maximum supply volt- age for the ctu is 32vdc. Use either a pmu 12vdc or 24vdc auxiliary output,...

  • Page 27: Using The Ctu With A Tb9100

    Tba0stu/tba0stp ctu operation manual using the ctu with a tb9100 27 © tait electronics limited september 2005 5 using the ctu with a tb9100 the ctu provides a selection of input and output connectors that allow the tb9100 base station to be connected to standard test equipment, and also to a pc runn...

  • Page 28

    28 using the ctu with a tb9100 tba0stu/tba0stp ctu operation manual © tait electronics limited september 2005 figure 5.1 ctu connections and controls b 1! C d e f g h i j 1@ 1# 1$ 1% 1& 1* 1( 2) 2! 2@ 2# top view rear view 1^ 1).

  • Page 29

    Tba0stu/tba0stp ctu operation manual using the ctu with a tb9100 29 © tait electronics limited september 2005 tb7100 tb8100 tb9100 b not used programming port serial port b c power led power led power led c d not used noise source output and on/off switch noise source output and on/off switch d e ba...

  • Page 30

    30 using the ctu with a tb9100 tba0stu/tba0stp ctu operation manual © tait electronics limited september 2005 ioioi this is an rs-232 serial port. Connect it to a pc running the calibration software when calibrating or tuning the base station. Power the power led is lit when the ctu is powered up. P...

  • Page 31

    Tba0stu/tba0stp ctu operation manual using the ctu with a tb9100 31 © tait electronics limited september 2005 600 Ω load this switch connects or disconnects the 600 Ω load across the line output. This allows the output to be terminated correctly for calibration procedures. Turn the switch on if the ...

  • Page 32

    32 using the ctu with a tb9100 tba0stu/tba0stp ctu operation manual © tait electronics limited september 2005 gnd this banana socket can be used as ground with rx gate, tx key, rssi, and tx relay. It is connected to the ctu and system interface connector ground. Tx relay this banana socket is used b...

  • Page 33

    Tba0stu/tba0stp ctu operation manual using the ctu with a tb9100 33 © tait electronics limited september 2005 figure 5.2 example ctu connection to a tb9100 reciter power aud eth rj45 rs-232 ethernet rs-232 dig power audio/signalling rs-232/signalling to pc running calibration software to pc running ...

  • Page 34

    34 using the ctu with a tb9100 tba0stu/tba0stp ctu operation manual © tait electronics limited september 2005.

  • Page 35: Appendix A - Ctu Accessories

    Tba0stu/tba0stp ctu operation manual appendix a - ctu accessories 35 © tait electronics limited september 2005 appendix a - ctu accessories the tba0stu base station ctu is supplied with the following accessories: ■ a selection of cables which allow the ctu to be connected to a tb7100, tb8100, or tb9...

  • Page 36

    36 appendix a - ctu accessories tba0stu/tba0stp ctu operation manual © tait electronics limited september 2005 figure a.1 accessories supplied with the tba0stu base station ctu part number description tb 710 0 tb 810 0 tb 910 0 b 219-03003-00 rj45 cable ✓ c 219-02893-00 sma-to-n-type cable ✓ ✓ d 219...

  • Page 37

    Tba0stu/tba0stp ctu operation manual appendix a - ctu accessories 37 © tait electronics limited september 2005 using a pmu to power the ctu the ctu can be powered from the auxiliary dc output at the rear of the pmu 1 . Connect the ctu to the pmu using one of the supplied dc power cables j fitted wit...

  • Page 38

    38 appendix a - ctu accessories tba0stu/tba0stp ctu operation manual © tait electronics limited september 2005.

  • Page 39

    Tba0stu/tba0stp ctu operation manual appendix b - ctu block diagram 39 © tait electronics limited september 2005 appendix b - ctu block diagram a block diagram of the ctu is provided on following page..

  • Page 40

    40 appendix b - ctu block diagram tba0stu/tba0stp ctu operation manual © tait electronics limited september 2005 figure b.1 ctu block diagram power supply noise source buffer 600 Ω on off on off on off on off on off on off on off on off on off on off 14 14 4 6 7 8 15 16 17 18 19 20 21 22 23 11 12 12...