1. DL manuals
  2. Tait
  3. Two-Way Radio
  4. TM8100 mobiles
  5. Accessories Manual

Tait TM8100 mobiles Accessories Manual

Summary of TM8100 mobiles

  • Page 1

    Tm8100 mobiles tm8200 mobiles accessories manual mma-00012-02 issue 02 august 2005.

  • Page 2: Tait Contact Information

    2 tm8100/tm8200 accessories manual © tait electronics limitedaugust 2005 tait contact information tait radio communications corporate head office tait electronics ltd p.O. Box 1645 christchurch new zealand for the address and telephone number of regional offices, refer to the taitworld website: webs...

  • Page 3: Contents

    Tm8100/tm8200 accessories manual 3 © tait electronics limited august 2005 contents tait contact information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 scope of...

  • Page 4

    4 tm8100/tm8200 accessories manual © tait electronics limited august 2005 4 tmaa01-05 options-extender board . . . . . . . . . . . . . . . . . . . . . . . . 43 4.1 changing the options-extender links. . . . . . . . . . . . . . . . . . . . . . . . . . . 43 4.2 installing the options-extender board . ...

  • Page 5

    Tm8100/tm8200 accessories manual 5 © tait electronics limited august 2005 10 installing a remote kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 10.1 installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 10.2 circuit ...

  • Page 6

    6 tm8100/tm8200 accessories manual © tait electronics limited august 2005 17.2 installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 17.3 radio programming for the tmaa10-04 remote ptt kit. . . . . . . . . . 135 17.1 radio programming for the tm...

  • Page 7: Preface

    Tm8100/tm8200 accessories manual preface 7 © tait electronics limited august 2005 preface scope of manual this manual contains information on installing, operating and servicing accessory products for tm8100 and tm8200 radios. Enquiries and comments if you have any enquiries regarding this manual, o...

  • Page 8: Associated Documentation

    8 preface tm8100/tm8200 accessories manual © tait electronics limited august 2005 associated documentation mma-00002-0x tm8100 mobiles user’s guide mma-00003-0x tm8200 mobiles user’s guide mma-00005-0x tm8100/tm8200 mobile radio service manual all available tm8000 product documentation is provided o...

  • Page 9: Alert Notices

    Tm8100/tm8200 accessories manual preface 9 © tait electronics limited august 2005 alert notices within this manual, four types of alerts are given to the reader: warning, caution, important and note. The following paragraphs illustrate each type of alert and its associated symbol. Warning!! This ale...

  • Page 10: Abbreviations

    10 preface tm8100/tm8200 accessories manual © tait electronics limited august 2005 abbreviations abbreviation description af audio frequency alc automatic level control cd compact disk cmos complementary metal oxide semiconductor dtmf dual tone multiple frequency dip dual in-line package esd electro...

  • Page 11: 1.1

    Tm8100/tm8200 accessories manual safety and servicing information 11 © tait electronics limited august 2005 1 safety and servicing information this chapter contains general information about safety and servicing procedures when working with tm8000 radios. While many tm8000 accessories plug into exte...

  • Page 12: 1.3

    12 safety and servicing information tm8100/tm8200 accessories manual © tait electronics limited august 2005 purchase an antistatic bench kit from a reputable manufacturer and install and test it according to the manufacturer’s instructions. Figure 1.1 shows a typical antistatic bench set-up. You can...

  • Page 13

    Tm8100/tm8200 accessories manual safety and servicing information 13 © tait electronics limited august 2005 figure 1.2 below shows a typical torx recess head screw (the actual hardware may differ slightly from this illustration due to variations in manufacturing techniques). Allen unc screws allen 4...

  • Page 14: 1.4

    14 safety and servicing information tm8100/tm8200 accessories manual © tait electronics limited august 2005 1.4 regulatory information any modifications you make to this equipment which are not authorised by tait electronics ltd may invalidate your compliance authority’s approval to operate the equi...

  • Page 15: 2.1

    Tm8100/tm8200 accessories manual tmaa01-01 line-interface board 15 © tait electronics limited august 2005 2 tmaa01-01 line-interface board the tmaa01-01 line-interface board provides both audio and digital interfaces for a variety of systems. The interfaces available are: ■ an isolated 600Ω audio in...

  • Page 16

    16 tmaa01-01 line-interface board tm8100/tm8200 accessories manual © tait electronics limited august 2005 2.2.1 adjustment points on the line-interface board the following table describes the line-interface adjustment points. Adjustments are made by setting the dip switches on s1 to either “on” or “...

  • Page 17

    Tm8100/tm8200 accessories manual tmaa01-01 line-interface board 17 © tait electronics limited august 2005 : 2.2.3 configuration procedure the line-interface board configuration must be completed before the board is installed in the radio, as the top side of the line-interface board is not accessible...

  • Page 18

    18 tmaa01-01 line-interface board tm8100/tm8200 accessories manual © tait electronics limited august 2005 2. Set the dip switches on the line-interface board (s1) to the following default test settings: ■ dip1 on (two-wire audio interface) ■ dip2 off ■ dip3 off ■ dip4 on (busy/gate = rx-gate) ■ dip5...

  • Page 19: 2.3

    Tm8100/tm8200 accessories manual tmaa01-01 line-interface board 19 © tait electronics limited august 2005 setting the line output level (rv2) monitor the line output (sk1 pins 14 and 15) and apply an on-channel signal from the rf signal generator at an output level of -47 dbm, modulated to 60% of sy...

  • Page 20

    20 tmaa01-01 line-interface board tm8100/tm8200 accessories manual © tait electronics limited august 2005 2.3.2 installation procedure 1. Disassemble the radio in order to gain access to the options cavity. For detailed disassembly instructions, refer to the disassembly proce- dure in the service ma...

  • Page 21

    Tm8100/tm8200 accessories manual tmaa01-01 line-interface board 21 © tait electronics limited august 2005 figure 2.2 installing the line-interface board b radio lid h screw-lock fasteners c external options connector bung i mounting posts d foam seal j m3x8 self-tapping screws e external options con...

  • Page 22: 2.4

    22 tmaa01-01 line-interface board tm8100/tm8200 accessories manual © tait electronics limited august 2005 2.4 programming information the lines from the radio’s internal options connector that are used by the line-interface board are iop_gpio1 to iop_gpio4. The behaviour of these lines is configured...

  • Page 23: 2.5

    Tm8100/tm8200 accessories manual tmaa01-01 line-interface board 23 © tait electronics limited august 2005 2.5 interface specification the following tables summarize the signals used for the line-interface board on the internal options connector (sk2 on the line-interface board) and the external opti...

  • Page 24: 2.6

    24 tmaa01-01 line-interface board tm8100/tm8200 accessories manual © tait electronics limited august 2005 2.6 line-interface board application the following diagram shows the control of two radios operated together, crossband or repeater linked. Table 2.8 external options connector (sk1—pins and sig...

  • Page 25: 2.7

    Tm8100/tm8200 accessories manual tmaa01-01 line-interface board 25 © tait electronics limited august 2005 2.7 line-interface board specifications input voltage 10.8v to 16vdc operating temperature range -10 °c to +60°c ambient dc input current line input sensitivity (60% deviation) -20dbm to +6dbm (...

  • Page 26

    26 tmaa01-01 line-interface board tm8100/tm8200 accessories manual © tait electronics limited august 2005 2.7.2 radio with line-interface board: receiver + line input transmitter frequency response* bandwidth response *relative to 1khz, 20 % deviation, below limiting 300hz to 3khz +1, -3db relative ...

  • Page 27: 2.8

    Tm8100/tm8200 accessories manual tmaa01-01 line-interface board 27 © tait electronics limited august 2005 2.8 circuit description 2.8.1 audio interface when the line-interface board is used for repeater applications, the audio passed between the two radios must be of such a level that the message is...

  • Page 28

    28 tmaa01-01 line-interface board tm8100/tm8200 accessories manual © tait electronics limited august 2005 the comparators (in u1) operate off a single sided regulated 5 v supply. U1 pins 2,4 and 5 provide receiver gate delay. Once the busy signal is not active, c4 charges through r12 and causes u4 t...

  • Page 29: 2.9

    Tm8100/tm8200 accessories manual tmaa01-01 line-interface board 29 © tait electronics limited august 2005 ref. Ipn description ref. Ipn description 2.9 pcb information 2.9.1 tmaa01-01 parts list (pcb ipn 220-65202-03) c1 014-08100-03 cap tant smd 10u 35v 20% d c2 015-26100-08 cap cer 0805 100n 10% x...

  • Page 30

    30 tmaa01-01 line-interface board tm8100/tm8200 accessories manual © tait electronics limited august 2005 ref. Pcb circuit ref. Pcb circuit ref. Pcb circuit 2.9.2 tmaa01-01 grid reference list (pcb ipn 220-65202-03) c1 b2 2:a2 c2 b1 2:a2 c3 c5 2:a4 c4 f6 1:d5 c5 d8 2:g3 c7 b6 2:a4 c8 d2 2:f6 c9 d2 2...

  • Page 31

    Tm8100/tm8200 accessories manual tmaa01-01 line-interface board 31 © tait electronics limited august 2005 2.9.3 line-interface board layout (top side) ipn 220-65202-03.

  • Page 32

    32 tmaa01-01 line-interface board tm8100/tm8200 accessories manual © tait electronics limited august 2005 2.9.4 line-interface board layout (bottom side) ipn 220-65202-03.

  • Page 33

    Tm8100/tm8200 accessories manual tmaa01-01 line-interface board 33 © tait electronics limited august 2005 2.9.5 line-interface board circuit diagram.

  • Page 34

    34 tmaa01-01 line-interface board tm8100/tm8200 accessories manual © tait electronics limited august 2005.

  • Page 35: Tmaa01-02 Rs-232 Board

    Tm8100/tm8200 accessories manual tmaa01-02 rs-232 board 35 © tait electronics limited august 2005 3 tmaa01-02 rs-232 board the tmaa01-02 rs-232 board fits inside the radio in the options cavity and is connected to the main pcb by the internal options connector and loom. The rs-232 signals are then m...

  • Page 36: 3.2

    36 tmaa01-02 rs-232 board tm8100/tm8200 accessories manual © tait electronics limited august 2005 3.2 installing the rs-232 board 3.2.1 parts required the following table describes the parts required to install an rs-232 board in a radio. The parts marked with an asterisk (*) are not shown in figure...

  • Page 37

    Tm8100/tm8200 accessories manual tmaa01-02 rs-232 board 37 © tait electronics limited august 2005 8. Screw the rs-232 board to the mounting posts on the radio lid using four m3x8 self-tapping screws j . Tighten the m3x8 screws to a torque of 1.9n·m (17 lbf·in) important for the rs232 board to be ins...

  • Page 38: 3.3

    38 tmaa01-02 rs-232 board tm8100/tm8200 accessories manual © tait electronics limited august 2005 3.3 interface specification the following tables summarize the signals used for the rs-232 board on the internal options connector (sk1 on the rs-232 board) and the external options connector (sk2 on th...

  • Page 39: 3.4

    Tm8100/tm8200 accessories manual tmaa01-02 rs-232 board 39 © tait electronics limited august 2005 ref. Ipn description ref. Ipn description 3.4 pcb information 3.4.1 tmaa01-02 parts list (pcb ipn 220-01740-01) c1 014-07100-02 cap tant smd 1u0 16v 20% a c2 018-14100-00 cap 0603 1n 50v x7r ±10% c3 018...

  • Page 40

    40 tmaa01-02 rs-232 board tm8100/tm8200 accessories manual © tait electronics limited august 2005 3.4.2 rs-232 board layout (top side) ipn 220-01740-01.

  • Page 41

    Tm8100/tm8200 accessories manual tmaa01-02 rs-232 board 41 © tait electronics limited august 2005 3.4.3 rs-232 board layout (bottom side) ipn 220-01740-01.

  • Page 42

    42 tmaa01-02 rs-232 board tm8100/tm8200 accessories manual © tait electronics limited august 2005 3.4.4 rs-232 board circuit diagram.

  • Page 43: 4.1

    Tm8100/tm8200 accessories manual tmaa01-05 options-extender board 43 © tait electronics limited august 2005 4 tmaa01-05 options-extender board the tmaa01-05 options-extender board provides external access to most of the signal lines provided by the radio’s internal options connector. The options-ext...

  • Page 44

    44 tmaa01-05 options-extender board tm8100/tm8200 accessories manual © tait electronics limited august 2005 4.1.1 power supply line the power supply output available on pin 2 of the external options connector is factory-set to 13.8v. The output on this pin can be changed to 5 v if r11 (a 0Ω surface ...

  • Page 45: 4.2

    Tm8100/tm8200 accessories manual tmaa01-05 options-extender board 45 © tait electronics limited august 2005 4.2 installing the options-extender board 4.2.1 parts required the following table describes the parts required to install an options-extender board in a radio. The parts marked with an asteri...

  • Page 46

    46 tmaa01-05 options-extender board tm8100/tm8200 accessories manual © tait electronics limited august 2005 7. Screw the options-extender board to the mounting posts on the radio lid using four m3x8 self-tapping screws j . Tighten the m3x8 screws to a torque of 1.9n·m (17lbf·in) important for the op...

  • Page 47: 4.3

    Tm8100/tm8200 accessories manual tmaa01-05 options-extender board 47 © tait electronics limited august 2005 4.3 interface specification the following tables summarize the signals used for the options-extender board on the internal options connector (sk1 on the options-extender board) and the externa...

  • Page 48

    48 tmaa01-05 options-extender board tm8100/tm8200 accessories manual © tait electronics limited august 2005 table 4.4 external options connector—pins and signals pin signal description 2 13v8_sw a 13v8 supply 6 aud_tap_out b programmable tap point out of the rx or tx audio chain. Dc-coupled 7 agnd a...

  • Page 49: 4.4

    Tm8100/tm8200 accessories manual tmaa01-05 options-extender board 49 © tait electronics limited august 2005 ref. Ipn description ref. Ipn description c1 018-16100-00 cap 0603 100n 16v x7r + - 10% c2 018-16100-00 cap 0603 100n 16v x7r + - 10% c3 018-16100-00 cap 0603 100n 16v x7r + - 10% c4 018-16100...

  • Page 50

    Ref. Pcb circuit ref. Pcb circuit ref. Pcb circuit 50 tmaa01-05 options-extender board tm8100/tm8200 accessories manual © tait electronics limited august 2005 4.4.2 tmaa01-05 grid reference list (pcb ipn 220-65203-00) c1 d5 1g4 c10 f3 1g5 c11 e3 1g8 c12 e2 1g8 c13 f2 1g5 c14 d2 1e2 c15 d2 1d2 c16 d2...

  • Page 51

    Tm8100/tm8200 accessories manual tmaa01-05 options-extender board 51 © tait electronics limited august 2005 4.4.3 options-extender board layout (top side) 4.4.4 options-extender board layout (bottom side) ip n 220 -652 03 -0 0 ipn 22 0- 65 20 3- 00

  • Page 52

    52 tmaa01-05 options-extender board tm8100/tm8200 accessories manual © tait electronics limited august 2005 4.4.5 options-extender board circuit diagram.

  • Page 53: Tmaa02-02 Dtmf Microphone

    Tm8100/tm8200 accessories manual tmaa02-02 dtmf microphone 53 © tait electronics limited august 2005 5 tmaa02-02 dtmf microphone the tmaa02-02 dtmf microphone plugs into the microphone socket on the radio control head, and enables users to make calls to a pabx or pstn. To make a call, enter the requ...

  • Page 54: 5.2

    54 tmaa02-02 dtmf microphone tm8100/tm8200 accessories manual © tait electronics limited august 2005 installing the microphone clip install the microphone clip in the most convenient location for the radio user. It must be within easy reach of the user, but in such a position that the microphone ptt...

  • Page 55: 5.5

    Tm8100/tm8200 accessories manual tmaa02-02 dtmf microphone 55 © tait electronics limited august 2005 . 5.5 circuit description the microphone has a standard 12-key telephone keypad. When one of the keypad keys is pressed, a dtmf tone specific to that key is generated on the mic_aud line (pin 5). For...

  • Page 56

    56 tmaa02-02 dtmf microphone tm8100/tm8200 accessories manual © tait electronics limited august 2005.

  • Page 57: Dynamic Microphones

    Tm8100/tm8200 accessories manual tmaa02-06 support kit for concealed & dynamic microphones 57 © tait electronics limited august 2005 6 tmaa02-06 support kit for concealed & dynamic microphones the support kit for concealed and dynamic microphones can be used in two main applications: ■ to monitor ac...

  • Page 58: 6.2

    58 tmaa02-06 support kit for concealed & dynamic microphones tm8100/tm8200 accessories manual © tait electronics limited august 2005 important to maintain the ip54 protection class, great care must be taken when installing the microphone capsule and seal d into the concealed-microphone cavity. 3. Pu...

  • Page 59: 6.3

    Tm8100/tm8200 accessories manual tmaa02-06 support kit for concealed & dynamic microphones 59 © tait electronics limited august 2005 6.3 interface specification the following table and diagram summarizes the signals used for the concealed and dynamic microphone support kit and shows the interface be...

  • Page 60: 6.4

    60 tmaa02-06 support kit for concealed & dynamic microphones tm8100/tm8200 accessories manual © tait electronics limited august 2005 ref. Ipn description ref. Ipn description 6.4 pcb information 6.4.1 tmaa02-06 parts list (pcb ipn 220-01712-01) c1 015-26330-08 cap cer 0805 330n 5% 10v x7r c2 015-263...

  • Page 61

    Tm8100/tm8200 accessories manual tmaa02-06 support kit for concealed & dynamic microphones 61 © tait electronics limited august 2005 6.4.2 concealed and dynamic microphone support board (top side) ipn 220-01712-01.

  • Page 62

    62 tmaa02-06 support kit for concealed & dynamic microphones tm8100/tm8200 accessories manual © tait electronics limited august 2005 6.4.3 concealed and dynamic microphone support board (bottom side) ipn 220-01712-01.

  • Page 63

    Tm8100/tm8200 accessories manual tmaa02-06 support kit for concealed & dynamic microphones 63 © tait electronics limited august 2005 6.4.4 concealed and dynamic microphone board circuit diagram.

  • Page 64

    64 tmaa02-06 support kit for concealed & dynamic microphones tm8100/tm8200 accessories manual © tait electronics limited august 2005.

  • Page 65: 7.1

    Tm8100/tm8200 accessories manual tmaa02-07 concealed microphone 65 © tait electronics limited august 2005 7 tmaa02-07 concealed microphone the concealed microphone can be used to monitor activity around the radio if the radio is placed in emergency mode, and is installed beside the speaker grille of...

  • Page 66: 7.2

    66 tmaa02-07 concealed microphone tm8100/tm8200 accessories manual © tait electronics limited august 2005 important to maintain the ip54 protection class, great care must be taken when installing the microphone capsule and seal d into the concealed-microphone cavity. 3. Push the microphone capsule a...

  • Page 67: Tmaa02-08 Keypad Microphone

    Tm8100/tm8200 accessories manual tmaa02-08 keypad microphone 67 © tait electronics limited august 2005 8 tmaa02-08 keypad microphone the tmaa02-08 keypad microphone plugs into the microphone socket on the graphical-display radio control head, and enables users to make calls to other radios, groups, ...

  • Page 68: 8.2

    68 tmaa02-08 keypad microphone tm8100/tm8200 accessories manual © tait electronics limited august 2005 8.2 installation installing the microphone important the keypad microphone grommet must be installed when- ever the microphone is plugged into the microphone socket. When installed, the grommet has...

  • Page 69: 8.3

    Tm8100/tm8200 accessories manual tmaa02-08 keypad microphone 69 © tait electronics limited august 2005 8.3 radio programming the radio does not need to be programmed to recognize the presence of a keypad microphone, as this is automatically done when the radio is powered on. However, there are a few...

  • Page 70

    70 tmaa02-08 keypad microphone tm8100/tm8200 accessories manual © tait electronics limited august 2005.

  • Page 71: Tmaa03-02 Security Bracket

    Tm8100/tm8200 accessories manual tmaa03-02 security bracket 71 © tait electronics limited august 2005 9 tmaa03-02 security bracket the tmaa03-02 security bracket can be used in place of the standard u-bracket in locations where you want to stop opportunistic removal of the radio by a third party, or...

  • Page 72: 9.1

    72 tmaa03-02 security bracket tm8100/tm8200 accessories manual © tait electronics limited august 2005 9.1 installing the security bracket and radio 9.2 installation planning before installing the security bracket, make sure that the site you have chosen for the installation meets the following crite...

  • Page 73: 9.3

    Tm8100/tm8200 accessories manual tmaa03-02 security bracket 73 © tait electronics limited august 2005 4. If the slide locks are closed, open them by inserting the slide lock key into the keyhole. Rotate the key 90° (it will slip into a detent), and pull. Two slide lock keys are supplied so that you ...

  • Page 74: 9.6

    74 tmaa03-02 security bracket tm8100/tm8200 accessories manual © tait electronics limited august 2005 9.6 re-ordering extra parts the following parts can be re-ordered separately in case of loss, or in situations where, for example, one security bracket is installed where several different radios ma...

  • Page 75: Installing A Remote Kit

    Tm8100/tm8200 accessories manual installing a remote kit 75 © tait electronics limitedaugust 2005 10 installing a remote kit a tmaa03-16 remote kit can be used to install the control head of a graphical- display radio remotely from the radio body. The diagram below shows the parts used for this inst...

  • Page 76

    76 installing a remote kit tm8100/tm8200 accessories manual © tait electronics limited august 2005 10.1.1 overview installing the control head remotely is done in six steps: 1. Remove the control head from the radio body, if necessary. 2. Install the torso interface b onto the radio body. 3. Mount t...

  • Page 77: –

    Tm8100/tm8200 accessories manual installing a remote kit 77 © tait electronics limitedaugust 2005 10.1.3 removing the control head from the radio body (if necessary) caution during this procedure, take care that the control- head seal is not damaged. Damage to this seal reduces environmental protect...

  • Page 78

    78 installing a remote kit tm8100/tm8200 accessories manual © tait electronics limited august 2005 10.1.5 mounting the remote u-bracket the remote u-bracket with its self-drilling screws, is used to install the remote control-head assembly on the dashboard or on any sufficiently flat surface. Cautio...

  • Page 79

    Tm8100/tm8200 accessories manual installing a remote kit 79 © tait electronics limitedaugust 2005 installing the remote control- head assembly in the remote u-bracket 1. Position the control-head assembly in the remote u-bracket and position it for a good viewing angle. Note adjusting the contrast o...

  • Page 80

    80 installing a remote kit tm8100/tm8200 accessories manual © tait electronics limited august 2005 10.1.8 connecting the remote cable caution when drilling holes in the vehicle, check that drilling at the selected points will not damage existing wiring, petrol tanks, fuel lines, brake pipes or batte...

  • Page 81: 10.2

    Tm8100/tm8200 accessories manual installing a remote kit 81 © tait electronics limitedaugust 2005 10.2 circuit description figure 10.3 shows a block diagram of the remote control-head installation. The control heads contain circuit boards with rs-485 driver components and an audio amplifier or atten...

  • Page 82: 10.3

    82 installing a remote kit tm8100/tm8200 accessories manual © tait electronics limited august 2005 10.3 servicing the remote kit parts 10.3.1 disassembling the torso interface disassemble only as much as is necessary to replace the defective parts. Re-assembly is carried out in reverse order of disa...

  • Page 83

    Tm8100/tm8200 accessories manual installing a remote kit 83 © tait electronics limitedaugust 2005 10.3.2 disassembling the control-head interface disassemble only as much as necessary to replace the defective parts or to swap the micromatch connector loom. Re-assembly is carried out in reverse order...

  • Page 84: 10.4

    Ref. Ipn description ref. Ipn description 84 installing a remote kit tm8100/tm8200 accessories manual © tait electronics limited august 2005 c101 015-06470-01 cap cer 1206 470n x7r 20% 50v c102 018-16100-00 cap 0603 100n 16v x7r + - 10% c103 015-07220-08 cap cer 1206 2u2 16v x7r c104 015-07220-08 ca...

  • Page 85

    Tm8100/tm8200 accessories manual installing a remote kit 85 © tait electronics limited august 2005 ref. Pcb circuit ref. Pcb circuit ref. Pcb circuit c101 f3 1d2 c102 f2 1d3 c103 k1 1d5 c104 f4 1e3 c105 e4 1d3 c106 g1 1c4 c107 f1 1c2 c108 g1 1c3 c109 e4 1c3 c110 f4 1b2 c111 f4 1b2 c112 m3 1e5 c113 m...

  • Page 86

    86 installing a remote kit tm8100/tm8200 accessories manual © tait electronics limited august 2005 board layout ipn 220-02122-02.

  • Page 87

    Tm8100/tm8200 accessories manual installing a remote kit 87 © tait electronics limitedaugust 2005 circuit diagram.

  • Page 88

    Ref. Ipn description ref. Ipn description ref. Pcb circuit ref. Pcb circuit ref. Pcb circuit 88 installing a remote kit tm8100/tm8200 accessories manual © tait electronics limited august 2005 c1 015-06470-01 cap cer 1206 470n x7r 20% 50v c2 018-14470-00 cap 0603 4n7 50v x7r±10% c3 015-07220-08 cap c...

  • Page 89

    Tm8100/tm8200 accessories manual installing a remote kit 89 © tait electronics limitedaugust 2005 board layout ipn 220-02123-01.

  • Page 90

    90 installing a remote kit tm8100/tm8200 accessories manual © tait electronics limited august 2005 circuit diagram.

  • Page 91: 11.1

    Tm8100/tm8200 accessories manual installing an enhanced remote kit 91 © tait electronics limitedaugust 2005 11 installing an enhanced remote kit the control head of a graphical-display radio can be installed remotely from the radio body. The diagram below shows the parts used for this installation. ...

  • Page 92

    92 installing an enhanced remote kit tm8100/tm8200 accessories manual © tait electronics limited august 2005 11.1.1 overview installing the control head remotely is done in six steps: 1. Remove the control head from the radio body, if necessary. 2. Install the torso interface b onto the radio body. ...

  • Page 93: –

    Tm8100/tm8200 accessories manual installing an enhanced remote kit 93 © tait electronics limitedaugust 2005 11.1.3 removing the control head from the radio body (if necessary) caution during this procedure, take care that the control- head seal is not damaged. Damage to this seal reduces environment...

  • Page 94

    94 installing an enhanced remote kit tm8100/tm8200 accessories manual © tait electronics limited august 2005 11.1.5 mounting the remote u-bracket the remote u-bracket with its self-drilling screws, is used to install the remote control-head assembly on the dashboard or on any sufficiently flat surfa...

  • Page 95

    Tm8100/tm8200 accessories manual installing an enhanced remote kit 95 © tait electronics limitedaugust 2005 u-bracket), the control-head interface loom i must be moved, so that it can reach the control head connector. To move the control-head interface loom: 1. Undo the seven torx t-10 screws on the...

  • Page 96

    96 installing an enhanced remote kit tm8100/tm8200 accessories manual © tait electronics limited august 2005 4. Screw the u-bracket in the chosen mounting position using the self- drilling screws washers. Installing the radio body in the u-bracket 1. Connect the antenna and power cables to the rear ...

  • Page 97: 11.2

    Tm8100/tm8200 accessories manual installing an enhanced remote kit 97 © tait electronics limitedaugust 2005 11.2 circuit description figure 11.3 shows a block diagram of the remote control-head installation. Both control heads contain a circuit board with audio amplifiers and rs- 485 driver componen...

  • Page 98: 11.3

    98 installing an enhanced remote kit tm8100/tm8200 accessories manual © tait electronics limited august 2005 11.3 servicing the remote control-head installation parts 11.3.1 disassembling the torso interface disassemble only as much as is necessary to replace the defective parts. Re-assembly is carr...

  • Page 99

    Tm8100/tm8200 accessories manual installing an enhanced remote kit 99 © tait electronics limitedaugust 2005 11.3.2 disassembling the control-head interface disassemble only as much as necessary to replace the defective parts or to swap the micromatch connector loom. Re-assembly is carried out in rev...

  • Page 100: 11.4

    Ref. Ipn description ref. Ipn description 100 installing an enhanced remote kit tm8100/tm8200 accessories manual © tait electronics limited august 2005 11.4 pcb information 11.4.1 tmaa03-03 control-head interface (pcb ipn 220-01721-04) parts list c1 016-08100-03 cap elec smd 10uf 35v 105/2000 c100 0...

  • Page 101

    Ref. Ipn description ref. Ipn description ref. Pcb circuit ref. Pcb circuit ref. Pcb circuit tm8100/tm8200 accessories manual installing an enhanced remote kit 101 © tait electronics limitedaugust 2005 r701 038-16120-10 res 0603 120k 1% 1/10w r710 036-13100-10 res 0805 100r 1% 1/8w r720 038-15100-10...

  • Page 102

    102 installing an enhanced remote kit tm8100/tm8200 accessories manual © tait electronics limited august 2005 board layout ipn 220-01721-04.

  • Page 103

    Tm8100/tm8200 accessories manual installing an enhanced remote kit 103 © tait electronics limitedaugust 2005 circuit diagram.

  • Page 104

    Ref. Ipn description ref. Ipn description ref. Pcb circuit ref. Pcb circuit ref. Pcb circuit 104 installing an enhanced remote kit tm8100/tm8200 accessories manual © tait electronics limited august 2005 c1 018-16100-00 cap 0603 100n 16v x7r + - 10% c2 015-07470-20 cap cer 1206 4u7 10% 25v x7r c3 015...

  • Page 105

    Tm8100/tm8200 accessories manual installing an enhanced remote kit 105 © tait electronics limitedaugust 2005 board layout ipn 220-01720-03.

  • Page 106

    106 installing an enhanced remote kit tm8100/tm8200 accessories manual © tait electronics limited august 2005 circuit diagram.

  • Page 107: 12.1

    Tm8100/tm8200 accessories manual tmaa04-04 crossband linking cable 107 © tait electronics limited august 2005 12 tmaa04-04 crossband linking cable the tmaa04-04 crossband linking cable is used to connect the auxiliary connectors of two radios configured as a crossband repeater. Components in the tma...

  • Page 108

    108 tmaa04-04 crossband linking cable tm8100/tm8200 accessories manual © tait electronics limited august 2005 programmable i/o form—digital tab the following table shows the crossband linking settings required in the digital tab of the programmable i/o form. Programmable i/o form—audio tab the follo...

  • Page 109: 12.3

    Tm8100/tm8200 accessories manual tmaa04-04 crossband linking cable 109 © tait electronics limited august 2005 12.3 operational testing 1. On the receiving radio, inject an on-channel rf signal at a level of -70 dbm, modulated to ±3 khz deviation (wide bandwidth channel) or ±1.5khz (narrow bandwidth ...

  • Page 110: 12.5

    110 tmaa04-04 crossband linking cable tm8100/tm8200 accessories manual © tait electronics limited august 2005 ref. Ipn description ref. Ipn description 12.5 pcb information 12.5.1 tmaa04-04 parts list (pcb ipn 220-02127-01) c2 018-16100-00 cap 0603 100n 16v x7r + - 10% c10 018-16100-00 cap 0603 100n...

  • Page 111

    Tm8100/tm8200 accessories manual tmaa04-04 crossband linking cable 111 © tait electronics limited august 2005 12.5.2 crossband linking board layouts ipn 220-02127-01.

  • Page 112

    112 tmaa04-04 crossband linking cable tm8100/tm8200 accessories manual © tait electronics limited august 2005 12.5.3 crossband linking board circuit diagram.

  • Page 113: Tmaa04-05 Ignition Sense Kit

    Tm8100/tm8200 accessories manual tmaa04-05 ignition sense kit 113 © tait electronics limitedaugust 2005 13 tmaa04-05 ignition sense kit the tmaa04-05 ignition sense kit provides a mating plug for the radio’s auxiliary connector. The four metre length of cable from pin 4 of the plug connects to the v...

  • Page 114

    114 tmaa04-05 ignition sense kit tm8100/tm8200 accessories manual © tait electronics limited august 2005.

  • Page 115: Tmaa10-01 Desktop Microphone

    Tm8100/tm8200 accessories manual tmaa10-01 desktop microphone 115 © tait electronics limited august 2005 14 tmaa10-01 desktop microphone the tmaa10-01 desktop microphone is an omnidirectional dynamic microphone which can be used in dispatch situations, where the microphone is positioned on a flat su...

  • Page 116: 14.3

    116 tmaa10-01 desktop microphone tm8100/tm8200 accessories manual © tait electronics limited august 2005 3. Squeeze the grommet and push the remaining corners into position. 4. Check that the grommet is seated correctly in the cavity. 14.3 adjustment adjust the output sensitivity of the desktop micr...

  • Page 117: 14.5

    Tm8100/tm8200 accessories manual tmaa10-01 desktop microphone 117 © tait electronics limited august 2005 . 14.5 circuit description the desktop microphone uses a dynamic microphone capsule and contains a pre-amplifier (q1) to boost the microphone level to that required by the radio. Power for the pr...

  • Page 118

    118 tmaa10-01 desktop microphone tm8100/tm8200 accessories manual © tait electronics limited august 2005.

  • Page 119: Tmaa10-02 Handset

    Tm8100/tm8200 accessories manual tmaa10-02 handset 119 © tait electronics limited august 2005 15 tmaa10-02 handset the tmaa10-02 handset provides the user with privacy and also improves the audio quality in noisy environments. The handset uses a dynamic microphone capsule, so for tm8100 radios, the ...

  • Page 120

    120 tmaa10-02 handset tm8100/tm8200 accessories manual © tait electronics limited august 2005 15.1.2 handset installation 1. Press the pushbutton and remove the handset from the locking cradle. 2. Disassemble the locking cradle by removing the four locking cradle screws. 3. Screw the handset mountin...

  • Page 121: 15.2

    Tm8100/tm8200 accessories manual tmaa10-02 handset 121 © tait electronics limited august 2005 15.2 radio programming dynamic microphone support dynamic microphone support must be enabled in the ui preferences form of the radio’s programming application, so that audio is optomized for dynamic microph...

  • Page 122: 15.3

    122 tmaa10-02 handset tm8100/tm8200 accessories manual © tait electronics limited august 2005 15.3 interface specification the following table and diagram summarizes the signals used for the handset on the radio’s microphone connector and shows the interface between the handset and the radio. . Tabl...

  • Page 123: Tmaa10-03 and Tmaa10-06

    Tm8100/tm8200 accessories manual tmaa10-03 and tmaa10-06 high-power remote speakers 123 © tait electronics limited august 2005 16 tmaa10-03 and tmaa10-06 high-power remote speakers the tmaa10-03 remote speaker (for the 25w radio) and the tmaa10-06 remote speaker (for the 40w/50 w radio) are installe...

  • Page 124

    124 tmaa10-03 and tmaa10-06 high-power remote speakers tm8100/tm8200 accessories manual © tait electronics limited august 2005 power connector wiring insert the remote speaker receptacles into the power connector socket, as shown in the diagrams below. Note the positive remote speaker wire has a whi...

  • Page 125: Tmaa10-05 Hands-Free Kit

    Tm8100/tm8200 accessories manual tmaa10-04 remote ptt kit and tmaa10-05 hands-free kit 125 © tait electronics limited august 2005 17 tmaa10-04 remote ptt kit and tmaa10-05 hands-free kit the tmaa10-04 remote ptt kit and the tmaa10-05 hands-free kit plug into the radio’s auxiliary connector. Both kit...

  • Page 126: 17.2

    126 tmaa10-04 remote ptt kit and tmaa10-05 hands-free kit tm8100/tm8200 accessories manual © tait electronics limited august 2005 3. Press select. While vox is on, the vox indication may be programmed to appear below the channel infor- mation on your display. Changing the sensitivity of vox you may ...

  • Page 127

    Tm8100/tm8200 accessories manual tmaa10-04 remote ptt kit and tmaa10-05 hands-free kit 127 © tait electronics limited august 2005 17.3 radio programming for the tmaa10-04 remote ptt kit remote ptt settings in the ptt form the following table shows the settings required in the ptt form of the program...

  • Page 128: 17.5

    128 tmaa10-04 remote ptt kit and tmaa10-05 hands-free kit tm8100/tm8200 accessories manual © tait electronics limited august 2005 vox settings in the key settings form in the key settings form of the programming application, one of the function keys on the control head can be programmed to activate ...

  • Page 129: 17.6

    Tm8100/tm8200 accessories manual tmaa10-04 remote ptt kit and tmaa10-05 hands-free kit 129 © tait electronics limited august 2005 . 17.6 circuit description the remote microphone signal is amplified by a pre-amplifier in the auxiliary connector plug. The power supply to this amplifier is provided by...

  • Page 130: 17.7

    130 tmaa10-04 remote ptt kit and tmaa10-05 hands-free kit tm8100/tm8200 accessories manual © tait electronics limited august 2005 ref. Ipn description ref. Ipn description 17.7 pcb information 17.7.1 tmaa10-04/tmaa10-05 parts list (pcb ipn 220-01711-01) c2 015-26330-08 cap cer 0805 330n 5% 10v x7r c...

  • Page 131

    Tm8100/tm8200 accessories manual tmaa10-04 remote ptt kit and tmaa10-05 hands-free kit 131 © tait electronics limited august 2005 17.7.2 pre-amplifier board layout ip n 22 0- 01 71 1- 01 ip n 2 20- 0 171 1- 01.

  • Page 132

    132 tmaa10-04 remote ptt kit and tmaa10-05 hands-free kit tm8100/tm8200 accessories manual © tait electronics limited august 2005 17.7.3 pre-amplifier board circuit diagram.

  • Page 133: Topa-Sv-024 Test Unit

    Tm8100/tm8200 accessories manual topa-sv-024 test unit 133 © tait electronics limitedaugust 2005 18 topa-sv-024 test unit the topa-sv-024 test unit is used to test and maintain tait orca portables (top) and tm8000 radios by providing an interface between the radio, a test pc, and an rf communication...

  • Page 134

    134 topa-sv-024 test unit tm8100/tm8200 accessories manual © tait electronics limitedaugust 2005 figure 18.2 test setup rf comms test set oscilloscope transmit audio receive audio / speaker connector power connector auxiliary connector rf connector (bnc) sinad audio audio in hi out audio monitor out...

  • Page 135: 18.2

    Tm8100/tm8200 accessories manual topa-sv-024 test unit 135 © tait electronics limitedaugust 2005 18.2 operation this section explains the function of the topa-sv-024 test unit controls. The procedure for using the test unit is described in the section of the service manual covering test equipment. 1...

  • Page 136

    136 topa-sv-024 test unit tm8100/tm8200 accessories manual © tait electronics limitedaugust 2005 18.2.4 rx / tx/ptt switch this 2-way toggle switch is used to switch between receive and transmit mode. ■ when set to rx, the ptt line is switched to high impedance. ■ when set to tx/ptt, the ptt line is...

  • Page 137: 18.3

    Tm8100/tm8200 accessories manual topa-sv-024 test unit 137 © tait electronics limitedaugust 2005 18.3 pcb information 18.3.1 parts list (pcb ipn 220-01418-02a rev. 4) 18.3.2 pcb layout bnc1 240-02100-11 skt coax bnc 3.5mm pnl n/tag bnc2 240-02100-11 skt coax bnc 3.5mm pnl n/tag c1 011-54100-01 cap c...

  • Page 138

    138 topa-sv-024 test unit tm8100/tm8200 accessories manual © tait electronics limitedaugust 2005 18.3.3 circuit diagram th e co m ponen t v al ues in the s che m atic diagr am are indi ca tiv e onl y. Ref er to the p ar ts li st f or a ctua l v al ues us ed. Spea k e r 4 Ω s p k r 8. 2 Ω sh o u ld b...

  • Page 139

    Tm8100/tm8200 accessories manual 139 © tait electronics limitedaugust 2005 tait general software licence agreement this legal document is an agreement between you (the “licensee”) and tait electronics limited (“tait”). By using any of the software or firmware items prior-installed in the related tai...

  • Page 140

    140 tm8100/tm8200 accessories manual © tait electronics limitedaugust 2005 limited warranty the software or firmware ( including open source components ) is supplied by tait and accepted by the licensee “ as is ” without warranty of any kind either expressed or implied , including but not being limi...