Tait TMAA10-07 Installation Instructions - Adjustment
2
TMAA10-07 Desktop Microphone
© Tait Electronics Limited January 2006
1. Plug the microphone cord into the microphone socket on the radio control head.
2. Slide the grommet along the cord and push two adjacent corners of the grommet
into the microphone socket cavity.
3. Squeeze the grommet and push the remaining corners into position.
4. Check that the grommet is seated correctly in the cavity.
Adjustment
Adjust the output level of the desktop microphone using the
control accessible from the underside of the desktop
microphone.
The microphone sensitivity is set to maximum by turning the
control fully clockwise.
Radio Programming
The desktop microphone has an internal pre-amplifier.
Therefore, the dynamic microphone support in the
UI Preferences form of the radio’s programming application
should not be enabled.
More Information
Refer to your radio provider for more information about this product.
Correct desktop microphone grommet seating
microphone
grommet
control head
adjust output level here