1. DL manuals
  2. Taiwan Commate Computer Inc.
  3. Motherboard
  4. LV-671Z
  5. User Manual

Taiwan Commate Computer Inc. LV-671Z User Manual

Manual is about: Mini-ITX Motherboard

Summary of LV-671Z

  • Page 1

    Lv-671z mini-itx motherboard user’s manual edition: 1.12 2005/3/24.

  • Page 2

    Lv-671z user’s manual 2.

  • Page 3

    Lv-671z user’s manual 3.

  • Page 4

    Lv-671z user’s manual 4 copyright copyright © 2003 - 2004. All rights reserved. This document is copyrighted and all rights are reserved. The information in this document is subject to change without prior notice to make improvements to the products. This document contains proprietary information an...

  • Page 5: Packing List

    Lv-671z user’s manual 5 packing list please check the package before you use this product hardware: lv-671z mini-itx motherboard x 1 cable kit: 40-pin ata100 ide cable x 1 26-pin slim type floppy cable x 1 4-pin to 4-pin power cable x 1 cd content driver user’s manual.

  • Page 6

    Lv-671z user’s manual index 6 index chapter 1 ..................................................................................... 9 1.1 ................................................................................. 9 1.2 ......................................................................... ...

  • Page 7

    Lv-671z user’s manual index 7 chapter 4 .................................................................................... 41 appendix a ............................................................ 43 a.1 ................................................................................................

  • Page 8

    Lv-671z user’s manual 8 (this page is left for blank).

  • Page 9: Chapter 1

    Lv-671z user’s manual introduction chapter 1 1.1 lv-671z is an all-in-one industrial compact pentium-m level motherboard based on mini-itx form factor at 170 x 170 mm of dimension. Based on intel 852gm and ich4 chipset, lv-671z offers the compact, embedded, value and high performance solution with i...

  • Page 10: 1.2

    Lv-671z user’s manual introduction 1.2 general specification form factor mini-itx motherboard at 170 x 170 mm (l x w) cpu embedded intel celeron m 600mhz package: mbga 479 fsb: 400mhz memory 1gbytes ddr200/266 sdram on one 184-pin dimm socket unbuffered, non-ecc supported chipset intel 82852gm gmch ...

  • Page 11

    Lv-671z user’s manual introduction vga display interface chipset intel 852gm gmch built-in intel extreme graphics technology with 133mhz vga core and 256-bit 3d engine frame buffer intel dvmt (dynamic video memory technology) 2.0 up to 64mbytes shared with system* display type crt and lcd monitors f...

  • Page 12

    Lv-671z user’s manual introduction power and environment power requirement one external 19v/12v (auto switching) dc adapter connector on rear panel 4-pin onboard 12v p4 4-pin power connector (two power resources selectable for each) input voltage range 11v ~ 13v for 12v power supply 16v ~ 20v for 19...

  • Page 13: 1.3

    Lv-671z user’s manual introduction 1.3 1 x 184-pin ddr266 dimm up to 1gb intel 852gm (northbridge) intel ich4 (southbridge) embedded intel celeron m 600mhz onboard dc to dc inverter intel 82540em gigabit lan realtek alc655 5.1ch audio codec component placement 13.

  • Page 14: 1.4

    Lv-671z user’s manual introduction 1.4 400mhz fsb 852gm crt dvo b/c mini-agp ich4 atapi devices usb devices 480mb/s ultraata100 usb2.0 audio ac97 codec compact flash irda ps/2 com port parallel port floppy lpc 33mhz pci bus pcmcia mini-pci slim pci gigabit ethernet controller ddr200/266 1 x 184-pin ...

  • Page 15: Chapter 2

    Lv-671z user’s manual hardware setup chapter 2 this chapter contains the information for installation of hardware. The install procedure includes jumper settings, cpu and memory installation, fan, i/o and panel connections. 2.1 cn_bpwr cn_inv dimm ide1 cn_lvds ide2 cn_usb1 cn_usb2 mini_agp minipci c...

  • Page 16: 2.2

    Lv-671z user’s manual hardware setup 2.2 jumper function jrtc coms operate / clear setting jlan lan1 enable/disable jvlcd lcd panel voltage setting jcfsel compact flash address setting jdom ide1 5v voltage enable/disable jdom jcfsel jvlcd jrtc jlan jumper reference 16.

  • Page 17: 2.3

    Lv-671z user’s manual hardware setup 2.3 2.3.1 connector function remark dimm 184-pin dimm socket standard ide1 40-pin primary ide port standard ide2 44-pin secondary ide port standard fdd 26-pin slim type fdd port standard cn_usb1 10-pin 3 rd / 4 th hi-speed usb 2.0 port standard cn_usb2 10-pin 5 t...

  • Page 18: 2.4

    Lv-671z user’s manual hardware setup 2.4 2.4.1 the board supports one 184-pin ddr200/266 (pc1600/pc2100) sdram up to 1gb of capacity, and supports non-ecc, unbuffered memory modules. Dimm 104-pin 80-pin please check the pin number to match the socket side well before installing memory module. Memory...

  • Page 19: 2.5

    Lv-671z user’s manual hardware setup 2.5 the board’s data of cmos can be setting in bios. If the board refuses to boot due to inappropriate cmos settings, here is how to proceed to clear (reset) the cmos to its default values. Jumper: jrtc type: onboard 3-pin header jrtc mode 1-2 clear cmos 2-3 norm...

  • Page 20: 2.6

    Lv-671z user’s manual hardware setup 2.6 the board supports two ide interface up to 4 atapi devices, base on intel ich4, the ide interface supports ata66/100 atapi drives. The ide1 supports +5v on pin-20 for dom (disk on module), the jumper jdom can let you select enable/disable this support. Jumper...

  • Page 21: 2.7 Compact Flash Interface

    Lv-671z user’s manual hardware setup 2.7 compact flash interface the board supports compact flash type ii socket for storage flash disk only, the jumper jcfsel can let you to setup the flash card operate on secondary master or slave mode. Jumper: jcfsel type: onboard 3-pin header jcfsel mode 1-2 mas...

  • Page 22: 2.8

    Lv-671z user’s manual hardware setup 2.8 2.8.1 the board is integrated with intel 852gm gmch chipset built-in intel extreme graphics technology with 133 mhz vga core, 256-bit 3d engine and intel dynamic video memory up to 64mbytes shared with system memory. The crt / analog vga interface includes on...

  • Page 23

    Lv-671z user’s manual hardware setup connector: cn_inv connector: jvlcd type: 5-pin lvds power header type: 3-pin power select header pin description pin description 1 +12v 1 vcc 2 gnd 2 lcdvcc 3 gnd 3 vcc3 4 gnd 5 enabkl connector: cn_lvds type: onboard 40-pin connector for lvds connector connector...

  • Page 24

    Lv-671z user’s manual hardware setup lcd installing guide: 1. Prepare a panel, inverter and lv-671z. 2. Please check the datasheet of the panel to see the voltage of the panel, and set the jumper jvlcd to +5v or +3.3v. 3. Prepare a lvds type lcd cable board side panel side for sample illustrator onl...

  • Page 25

    Lv-671z user’s manual hardware setup after setup the devices well, you need to select the lcd panel type in the bios. The panel type mapping is list below: bios panel type selection form for 18-bit color for 24-bit color no. Output format no. Output format 1 640 x 480 8 1024 x 768 2 800 x 600 9 1280...

  • Page 26: 2.9

    Lv-671z user’s manual hardware setup 2.9 the board integrates intel ich4 with realtek alc655 codec for ac97 rev 2.3; it comes with the features below: ● microsoft whql/wlp 2.0 audio compliance ● software selectable for 2-channel/5.1-channel sound ● 16-bit stereo full-duplex codec with 48khz sampling...

  • Page 27

    Lv-671z user’s manual hardware setup connector: cn_audio type: 10-pin (2 x 5) 2.54-pitch header pin description pin description 1 line – right 2 ground 3 line – left 4 mic 5 mic 6 ground 7 n/c 8 line out – left 9 line out – right 10 ground connector: cdin type: 4-pin header pin description 1 cd – le...

  • Page 28: 2.10

    Lv-671z user’s manual hardware setup ethernet interface 28 2.10 the board integrates with intel 82540em gigabit controller at the type of 10base-t/100base-tx/1000base-t auto-switching ethernet with full duplex and ieee 802.3u compliant. The lan function comes with a rj45 jack on the rear i/o panel. ...

  • Page 29: 2.11

    Lv-671z user’s manual hardware setup 2.11 the board comes with a 4-pin mini-din power connector for dc 12v/19v auto-switching input, it also has one 4-pin p4 additional use power connector for internal power supply, you can choose one pf them to meet your application. The board has two power connect...

  • Page 30

    Lv-671z user’s manual hardware setup connector: cn_12v type: 4-pin standard pentium 4 +12v power connector pin description pin description 1 +12v 2 +12v 3 ground 4 ground connector: dc_in type: 4-pin dc power connector pin description pin description 1 +12v 2 ground 3 +12v 4 ground connector: cpufan...

  • Page 31: 2.12

    Lv-671z user’s manual hardware setup 2.12 the board offers 16-bit digital i/o to customize its configuration to your control needs. For example, you may configure the digital i/o to control the opening and closing of the cash drawer or to sense the warning signal from a tripped ups. The following is...

  • Page 32: 2.13

    Lv-671z user’s manual hardware setup 2.13 the board comes with one slim type pci slot and one optional mini-agp or mini-pci interface. The slim pci slot supports up to 2 pci devices through an optional riser card. For mini-pci interface, you can obtain a wireless lan card for potable system. For min...

  • Page 33: 2.14

    Lv-671z user’s manual hardware setup 2.14 connector: jfrnt type: onboard 14-pin (2 x 7) 2.54-pitch header function signal pin signal function vcc 1 2 vcc ide led active 3 4 n/c reset 5 6 gnd power led reset gnd 7 8 vcc n/c 9 10 n/c pwrbt 11 12 n/c power button 5vsb 13 14 spkin speaker jfrnt 1 14 swi...

  • Page 34

    Lv-671z user’s manual 34 (this page is left for blank).

  • Page 35: Chapter 3

    Lv-671z user’s manual system setup chapter 3 3.1 the watchdog timer makes the system auto-reset while it stops to work for a period. The integrated watchdog timer can be setup as system reset mode by program. Timeout value range - 1 to 255 - second or minute program sample watchdog timer setup as sy...

  • Page 36: 3.2

    Lv-671z user’s manual system setup 3.2 the board integrates intel® ich4 with realtek® alc655 codec. It can support 2-channel or 5.1 channel sound under system configuration. Please follow the steps below to setup your sound system. 1. Install realtek ac97 audio driver. 2. Lunch the control panel and...

  • Page 37: 3.3

    Lv-671z user’s manual system setup 3.3 this chapter shows you how to setup the display device under windows os. Before you using your display device: 1. Check your software before you can use the display device properly, please install the vga driver. 2. Check your hardware please setup the display ...

  • Page 38

    Lv-671z user’s manual system setup for advanced display settings, please click advanced… button and choose intel(r) extreme graphics. Please click graphics properties button to enter the advanced setup. Display device setup 38.

  • Page 39

    Lv-671z user’s manual system setup while you entering the graphics properties, you will see the options below: this option can let you configure the crt monitors for colors, screen area (resolution) and refresh rate. This option can let you configure the lcd panel for colors, screen area (resolution...

  • Page 40

    Lv-671z user’s manual system setup this option can let you configure the dual display for clone mode (same display on two devices) this option can let you configure the dual display for extended desktop mode display device setup 40

  • Page 41: Chapter 4

    Bios setup bios setup 41 lv-671 user’s manual chapter 4 the single board computer uses the award bios for the system configuration. The award bios in the single board computer is a customized version of the industrial standard bios for ibm pc at-compatible computers. It supports intel x86 and compat...

  • Page 42

    Lv-671z user’s manual 42 (this page is left for blank).

  • Page 43: Appendix A

    Lv-671z user’s manual i/o port pin assignment appendix a 39 1 a.1 connector: ide1 2 40 type: 40-pin (20 x 2) box header pin description pin description 1 reset 2 ground 3 d7 4 d8 5 d6 6 d9 7 d5 8 d10 9 d4 10 d11 11 d3 12 d12 13 d2 14 d13 15 d1 16 d14 17 d0 18 d15 19 ground 20 vcc 21 req 22 ground 23...

  • Page 44

    Lv-671z user’s manual i/o port pin assignment connector: ide2 2 44 type: 44-pin (22 x 2) box header 1 43 pin description pin description 1 reset 2 ground 3 d7 4 d8 5 d6 6 d9 7 d5 8 d10 9 d4 10 d11 11 d3 12 d12 13 d2 14 d13 15 d1 16 d14 17 d0 18 d15 19 ground 20 n/c 21 req 22 ground 23 iow-/stop 24 g...

  • Page 45: A.2

    Lv-671z user’s manual i/o port pin assignment floppy port 45 a.2 connector: fdd type: 26-pin connector pin description pin description 1 vcc 2 index 3 vcc 4 drv0 5 vcc 6 dskchg 7 drv1 8 n/c 9 mtr1 10 mtr0 11 rpm 12 dir 13 n/c 14 step 15 ground 16 write data 17 ground 18 write gate 19 n/c 20 track 0 ...

  • Page 46: A.4

    Lv-671z user’s manual i/o port pin assignment a.4 5 1 connector: cn_ir type: 5-pin header for sir ports pin description 1 vcc 2 n/c 3 irrx 4 ground 5 irtx 6 10 a.5 11 12 13 14 15 1 2 3 4 5 connector: vga type: 15-pin d-sub female connector on bracket pin description pin description pin description 1...

  • Page 47: A.7

    Lv-671z user’s manual i/o port pin assignment a.7 5 1 connector: com1 type: 9-pin d-sub male connector on bracket 9 6 pin description pin description 1 mdcd1- 6 mdsr1- 2 msin1- 7 mrts1- 3 mso1- 8 mcts1- 4 mdtr1- 9 mri1- 5 ground 1 5 connector: com2 type: 9-pin d-sub male connector on bracket 9 6 pin...

  • Page 48

    Lv-671z user’s manual 48 (this page is left for blank).

  • Page 49: Appendix B

    Lv-671z user’s manual flash bios appendix b b.1 the board is based on award bios and can be updated easily by the bios auto flash tool. You can download the tool online at the address below: http://www.Phoenix.Com/en/home/ http://www.Commell.Com.Tw/support/support_sbc.Htm file name of the tool is “a...

  • Page 50

    Lv-671z user’s manual 50 (this page is left for blank).

  • Page 51: Appendix C

    Lv-671z user’s manual system resource appendix c c.1 address range device x0000 - x000f direct memory access controller x0010 - x001f motherboard resource x0020 - x0021 programmable interrupt controller x0022 - x003f motherboard resource x0040 - x0043 system clock x0044 - x005f motherboard resource ...

  • Page 52

    Lv-671z user’s manual system resource x03f8 - x03ff communication port (com1) x0400 - x04bf motherboard resource x04d0 - x04d1 motherboard resource x0500 - x051f intel(r) 82801db/dbm smbus controller - 24c3 x0778 - x077b printer port (lpt1) x0a78 - x0a7b motherboard resource x0b78 - x0b7b motherboar...

  • Page 53: C.2

    Lv-671z user’s manual system resource c.2 range device x00000000 - x0009ffff system board extension for acpi bios x000a0000 - x000affff intel(r) 82852/82855 gm/gme graphics controller x000b0000 - x000bffff intel(r) 82852/82855 gm/gme graphics controller x000c0000 - x000cc7ff intel(r) 82852/82855 gm/...

  • Page 54: C.3

    Lv-671z user’s manual system resource c.3 c3.1 irq irq number device 0 system clock 1 standard 101/102-key or microsoft natural keyboard 2 programmable interrupt controller 3 communication port (com2) 4 communication port (com1) 5 realtek ac'97 audio 5 intel(r) 82801db/dbm smbus controller - 24c3 5 ...

  • Page 55

    Lv-671z user’s manual system resource c3.2 dma channel device 0 (free) 1 (free) 2 standard floppy disk controller 3 (free) 4 direct memory access controller 5 (free) 6 (free) 7 (free) system irq and dma resource 55.

  • Page 56: Contact Information

    Lv-671z user’s manual 56 contact information any advice or comment about our products and service, or anything we can help you please don’t hesitate to contact with us. We will do our best to support you for your products, projects and business taiwan commate computer inc. Address 8f, no. 94, sec. 1...