Taiwan Electrical & Electronic Manufacturers NEOS3000A series User Manual

Summary of NEOS3000A series

  • Page 1

    Gwt-neos3000ae ver1.0 neos3000 s eries 1 u ser m anual a. Introduction thank you for choosing the neos3000a seriesproduct. This innovative product make you connect to standard telephone equipment with gsm engine into a cellular network for total communications flexibility. You can connect the neos30...

  • Page 2

    Gwt-neos3000ae ver1.0 neos3000 s eries 2 u ser m anual 2. Connect the antenna to the sma antenna connector on the back of neos3000a. 3. Connect the power and plug in your telephone equipment(figure 2 and 3) 3-1. Connect the line port of neos3000a with wall jack of pstn. (if you don’t have pstn or ne...

  • Page 3

    Gwt-neos3000ae ver1.0 neos3000 s eries 3 u ser m anual 4. Led status indicators position led color led activity description 1 red continuous on or off the dc power is on or off 2 yellow continuous on the pstn line is idle. 2 yellow flashing(0.05sec on / 0.05sec off) the pstn line is talking. 3 green...

  • Page 4

    Gwt-neos3000ae ver1.0 neos3000 s eries 4 u ser m anual g. Function description (reference function code table) 1. Outgoing time control 1-1. Neos will emit three du du du tones at 25 seconds before the end of the outgoing time that you program. It reminds you that this call will be finished. 1-2. Pr...

  • Page 5

    Gwt-neos3000ae ver1.0 neos3000 s eries 5 u ser m anual h. Installition tips 1. Make sure that gsm engine logged to a network. Check the receive signal strength and move the antenna until you achieve the best signal possibly. 2. Rf energy from gsm engine may affect the other standard telephone equipm...

  • Page 6

    Gwt-neos3000ae ver1.0 neos3000 s eries 6 u ser m anual.