Takenaka System FC1500FCL Instruction Manual - page 3
K11414;3/20
- 3 -
1. Features
●
Progressive scan camera incorporated with 1.45 megapixel, 2/3”-size CCD image sensor.
●
10bit (2 tap) Video signal is output in progressive scanning (non-interlaced scanning) format, complying with Camera
Link (Base configuration).
●
A full frame shutter image can be obtained at a rate of 30 frames per second.
●
The smear in high speed shutter mode has been reduced and sensitivity in near-UV light range has been increased
compared to our existing cameras, as newly-designed interline transfer CCD is adopted.
●
When the external trigger signal is input, the image is reset in random timing (Asynchronous timing) and the electronic
shutter image can be obtained at any given point in time. (Asynchronous shutter mode)
●
Possible to transmit the external trigger signal and the serial communication command via CameraLink interface.
●
Small and lightweight (same size as FC1500F).
2. Outline
Imaging device
Size of image pickup area
Number of pixels
Pixel size
Progressive scanning, interline
OB
(
Optical Black
)
Effective image pickup area
V
1392
8
2
1040
H
2
40
2/3 inch size
1392(H)
×
1040(V)
6.45
μ
m(H)
×
.6.45
μ
m(V)
Number of effective pixels
1.45 megapixels
Read out
scanning
Horizontal
32.0 KHz
Vertical
30 Hz
Clock
57.273 MHz
Electronic shutter
1/23000 to 1/3 second
(Continuous shutter / Asynchronous shutter)
Video output signal
Digital out 10bit (2 Tap)
Complied with Camera Link (Base Configuration)
Scanning mode
Normal scanning for all pixels (30 fps)
Partial scanning for central part (60 fps)
Block diagram
Spectral sensitivity
1 . 0
0 . 9
0 . 8
0 . 7
0 . 6
0 . 5
0 . 4
0 . 3
0 . 2
0 . 1
0 . 0
5 0 0
4 0 0
6 0 0
7 0 0
8 0 0
9 0 0
1 0 0 0
Wa ve l en gt h ( n m )
( T y p i c al v a l u e )
R
e
la
ti
v
e
s
en
s
it
iv
it
y