Takex FS-2000E Instruction Manual
Instruction Manual
FS-2000E
FLAME SENSOR
Flame sensor FS-2000E is designed to detect ultraviolet rays contained in flames, and to initiate an alarm.
In addition to alarm sound, FS-2000E is equipped with form C (N/C, N/O.) output, to meet professional application.
Also, memory LED enables you to find out the initiated sensor out of a series of sensors.
Area adjustment mechanism brings wide selection of protection angle.
Quick separation of sensor and base eases installation and maintenance.
We appreciate your purchase of a TAKEX flame sensor.
Please read this instruction manual carefully for correct and effective use.
This sensor is designed to detect flames and to initiate an alarm, it is not a fire-preventing device.
TAKEX is not responsible for damage, injury or losses caused by accident, theft, Acts of God (including inductive surge by lightning), abuse,
misuse, abnormal usage, faulty installation or improper maintenance.
1
PARTS DESCRIPTION
PRODUCT DESCRIPTION
Wire lead
(For exposed wiring)
Detection window
(Sensor built-in)
Memory LED (yellow)
Blinks for 3min. after
alarm then Light on for
47 min.
Wiring hole
Wiring hole
Mode selector
Area locking screw
Front mark
Lock window
Buzzer (Built-in)
Alarm sound : Sounds intermittently during
offdelay 10sec.
Sensor head
Terminals
Locking screw hole
Release lever
Knockout for exposed wiring
【SENSOR UNIT】
【BASE UNIT】
1-1
Description
This sensor detects Ultraviolet rays in the flames and initiates an alarm.
It does not detect smoke, heat.
1-2
Accessory
1-3
Mode setting
Mode selector
1 2 3 4 5
Detection Sensitivity
Alarm Sound
Alarm Memory
Detection timer
Alarm LED (Red)
Blinks during
offdelay 10sec.
Tapping screw
(φ4×25) × 2 pcs
Sensor locking screw
(φ3×6) × 1 pc
Instruction manual
× 1 copy