TaKo Electronics EBi Direct Interpolation DAC User Manual - page 4
Front Panel
Front Panel
B. Non-oversampling mode/direct interpolation mode switch(indicator)
B. Non-oversampling mode/direct interpolation mode switch(indicator)
A. Power switch/input selector/power on indicator
A. Power switch/input selector/power on indicator
C. Absolute Phase button (indicator)
C. Absolute Phase button (indicator)
D. Signal Lock Indicator
D. Signal Lock Indicator
E. Coaxial input Indicator
E. Coaxial input Indicator
F. Optical input Indicator
F. Optical input Indicator
G. USB input indicator
G. USB input indicator
Power/Input button/Power on indicator
Power/Input button/Power on indicator
This button cycles through all the avaliable inputs and power on/off.
This button cycles through all the avaliable inputs and power on/off.
Red indicator will light up when power is on.
Red indicator will light up when power is on.
Non-oversampling/Direct interpolation button (indicator)
Non-oversampling/Direct interpolation button (indicator)
Input sequence:power off=>Coaxial in=>Optical in=>USB in=>power off
Input sequence:power off=>Coaxial in=>Optical in=>USB in=>power off
This button toggles between Non-oversampling and Direct Interpolation mode.
This button toggles between Non-oversampling and Direct Interpolation mode.
Green indicator will light up when the Direct interpolation mode is active.
Green indicator will light up when the Direct interpolation mode is active.
Polarity button (indicator)
Polarity button (indicator)
This button toggles analog output Polarity. If you need to correct a phase error on both channels,
This button toggles analog output Polarity. If you need to correct a phase error on both channels,
Press the Polarity button to reverse the phase of the analog output.
Press the Polarity button to reverse the phase of the analog output.
Yellow indicator will light up when the phase is inverted.
Yellow indicator will light up when the phase is inverted.
Lock Indicator
Lock Indicator
Lock indicator will light up when Signal is locked to SPDIF (coaxial/optical) and USB input is
Lock indicator will light up when Signal is locked to SPDIF (coaxial/optical) and USB input is
recognize with PC.
recognize with PC.
Coaxial input Indicator
Coaxial input Indicator
Coaxial input indicator will light up when Coaxial input is selected.
Coaxial input indicator will light up when Coaxial input is selected.
Optical input Indicator
Optical input Indicator
Optical input indicator will light up when Optical input is selected.
Optical input indicator will light up when Optical input is selected.
USB input Indicator
USB input Indicator
USB input indicator will light up when USB input is selected.
USB input indicator will light up when USB input is selected.
A
B
C
D
E
F
G