Talent LT804-A Quick Installation Manual - Adsl2+ Router
3
ADSL2+ Router
Connection of ADSL2+ Router
If you have an ISDN telephone line connected the router as shown below:
(Annex-B ADSL2+ Router)
1.
Connect the supplied RJ45 Ethernet cable from your PC's Ethernet port
to the ADSL2+ Router's “LAN” Port.
2.
Connect the supplied RJ11 telephone cable from your home's telephone
jack to the “LINE” port of the
supplied splitter. Connect the other supplied
RJ11 telephone cable to the “MODEM”
port of the splitter and connect
the other end of this cable to the “LINE”
port of your ADSL2+ Router.
(If
there is no option Splitter, please connect the supplied RJ11 telephone
cable from your home's telephone jack to the “LINE” port of your
ADSL2+ Router.)
3.
Connect a RJ11 telephone cable to the “PHONE” port of the splitter and
connect the other end to the telephone.
4.
Connect the power adapter to the power inlet “POWER” of the ADSL2+
Router and turn the “ON/OFF SWITCH” switch of your ADSL2+ Router
on.