Talent MP12 User Manual - page 4
4
5. DMX512 Connections
'0;LVDZLGHO\XVHGSURWRFROIRULQWHOOLJHQWOLJKWLQJFRQWUROZLWKDYDLODEOH
FKDQQHOV(YHQLI\RXGRQRWZLVKWRRSHUDWH\RXU7DOHQWOLJKWLQJ¿[WXUHYLDDQ
outboard DMX controller, utilizing the master/slave mode will still require unit-to-unit
connection by proper DMX cables.
Caution: Common microphone cables may be used to connect small numbers
RI'0;¿[WXUHVRYHUVKRUWGLVWDQFHVEXWRIIHUWKHULVNRIHUUDWLFRSHUDWLRQ8VHRI
correct DMX cables greatly reduces data errors caused by improper connection.
• If you are using a controller with 5-pin DMX output, use a 5-pin to 3-pin adapter cable.
&RQQHFW¿[WXUHVWRJHWKHULQD³GDLV\FKDLQ´E\FRQQHFWLQJWKH'0;RXWSXWRIWKH¿UVW
¿[WXUHWRWKH'0;LQSXWRIWKHQH[W¿[WXUH7KLVFDEOHFDQQRWEHEUDQFKHGRUVSOLWE\
D³<´FDEOH,QDGHTXDWHRUGDPDJHGFDEOHVEDGVROGHUMRLQWVRUFRUURGHGFRQQHFWRUV
can easily distort the signal, cause errors, and shut down the system. Never allow
FRQWDFWEHWZHHQWKHGDWDFRPPRQVKLHOGFRQQHFWLRQ;/53LQDQGWKH¿[WXUH¶V
chassis/electrical ground.
• The DMX output and input connectors are pass-through to maintain the DMX circuit if
power to one of the units is disconnected.
2QWKHODVW¿[WXUHWKH'0;RXWSXWVKRXOGEHWHUPLQDWHGZLWKDWHUPLQDWRUWRUHGXFH
VLJQDOHUURUV6ROGHUDRKPZDWWUHVLVWRUEHWZHHQSLQ'0;DQGSLQ
'0;RQDSLQ;/5SOXJDQGFRQQHFWLWWRWKH'0;RXWSXWRIWKHODVW¿[WXUH
6. Control Panel