Talk-a-Phone VOIP-500 Series Manual
OUTDOOR EMERGENCY PHONES
VOIP-500 – Single Button Native
VoIP Emergency Phone
Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • info@talkaphone.com • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, WEBS, WEBS Contact and Scream Alert are registered trademarks of Talk-A-Phone Co. Cisco, the Cisco
logo, and Cisco Systems are trademarks or registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All rights reserved.
Description
The VOIP-500 Series Phone is an outdoor-rated, ADA-compliant hands-free
Voice over IP (VoIP) Emergency Phone for use in locations such as: parking
facilities, college campuses, medical centers, and industrial parks.
Features
•
Exceptional sound clarity during conversation (over 90dB, configurable)
and paging (over 100dB, configurable)
•
Unit can be paged remotely by security as part of Talk-A-Phone’s Wide-
Area Emergency Broadcast System (requires WEBS Contact® software)
•
Ethernet connectivity and full IP compatibility with existing routers and
LAN infrastructure
•
Additional Layer 2 switch Ethernet port to connect other devices (e.g. IP
Video Cameras)
•
Supports standard SIP protocol
•
Configuration and firmware upgrades through Web GUI
•
Power over Ethernet (PoE, 802.3af), 12V DC, 24V AC/DC
•
Cast metal raised letter and Braille signage for ADA compliance
•
Vandal resistant stainless steel faceplate
•
1.5" diameter metal button painted with UV-resistant finish
•
Auxiliary inputs and outputs to integrate with CCTV, LED Blue
Lights, Scream Alert®, Gates and other Access Points
•
Three LED indicators for hearing impaired (call placed, call
received, help on the way)
•
Built-in auto-dialer can dial six numbers: if first number doesn't
answer or is busy, dials next number
•
Auto-answer allows security to monitor and initiate calls with
Emergency Phone
•
Automatically inform the attendant of emergency phone location via recorded message
Specifications
Construction:
12 gauge (2.8mm) #4 brushed stainless steel faceplate
Dimensions:
Front Panel:
9.5 (241) W x 11.75 (298) H in (mm)
Back Box:
6.4 (163) W x 9.75 (248) H x 2.71 (69) D in (mm)
Weight:
8 lbs (3.6 kg)
Storage Temperature:
-40º F to +149º F (-40º C to +65º C)
Operating Temperature: -40º F to +131º F (-40º C to +55º C)
Relative Humidity:
Up to 95% non-condensing
Protection:
Circuit board conformal coated
Mounting:
Flush mount (surface mount options available)
Communication:
Full Duplex 2-way hands-free communication
Digit Capacity:
Up to 30 digits, including pauses, for each of six phone numbers
Call Control Signaling:
SIP (RFC3261 compliant)
NOTE: Not all features of the VOIP-500 Series Phone are available when used in conjunction with analog telephony adaptor devices or
with Public Switched Telephone Network (PSTN).
For example, the round robin dialing feature (See "VOIP-500 Configuration and Operation Manual", Section 4.5.1) and voice message
functionality (See "VOIP-500 Configuration and Operation Manual", Section 4.7) of the VOIP-500 Series Phone may not operate as
described in the manual when used in conjunction with equipment such as a Model VOIP-1-2-4-8 interface, 3rd party gateways, and/or
PSTN interfaces such as T1, PRI, or loopstart trunks.
Talk-A-Phone’s VOIP-500 Series Phone has tested compatible
with Cisco UCM 7.1 and UCM 8.6. The Cisco Compatible logo
signifies that Talk-A-Phone’s product has undergone
interoperability testing by Talk-A-Phone together with Cisco and
a third-party test house based on testing criteria set by Cisco.
Talk-A-Phone is solely responsible for the support and warranty
of its product. Cisco makes no warranties, express or implied,
with respect to Talk-A-Phone’s product or its interoperation with
the listed Cisco product(s) and disclaims any implied warranties
of merchantability, fitness for a particular use, or against
infringement.