Talk To The Wilson Mini Wilson User Instructions

The Mini Wilson™ 

Patent Pending 

Instructions for using the Mini Wilson™ 

Congratulations on purchasing The Mini Wilson™, a state-of-the art digital voice 

card recorder.  The following are instructions for its use: 

Batteries 

The Mini Wilson™

 requires two (2) standard lithium batteries model CR2032.  

Two are already pre-installed. 

Before operating the unit slide the batter compartment outwards and remove the 

battery insulation tab from the edge of The Mini Wilson™. 

Note:  When batteries are removed and replaced, The Mini Wilson™ will retain 

all existing messages. 

Recording 

To record, press the Record button (REC). After the beep, speak in the direction 

of The Mini Wilson™.  The recoding indicator LED light will flash, indicating that 

The Mini Wilson is recording.  During recording, pressing the PAUSE button will 

pause the recording.  Press the PAUSE button again to resume the recording. 

To stop recording press the Play/Stop button (►

■

).  The Mini Wilson™ will 

beep twice, indicating that the recoding has stopped.  Alternatively, The Mini 

Wilson™ 

will automatically cease recoding if the memory is full (the LED will turn 

off.) 

Your can record messages for a total recoding time of up to 1 hour. 

Play Back 

To play back your message, simply press the Play/Stop button (►

■

).  The Mini 

Wilson™ 

will play back the most recently recorded message first.  Each time the