Talkaphone AVM-1 Operation Manual - page 10
AVM-1
IP Video Attendant Station
Configuration / Operation Manual
Page 10 of 13
Rev. 10/5/2016
Copyright 2016 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • info@talkaphone.com • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Talkaphone, Scream Alert, WEBS, and WEBS Contact are registered trademarks of Talk-A-Phone Co. All
rights reserved. All other trademarks mentioned in this document or website are the property of their respective owners and does not imply or indicate any approval, endorsement,
sponsorship, or affiliation with such owners unless such approval, endorsement, sponsorship, or affiliation is expressly indicated.
Account
→ Call Settings → Configure Door System → Configure
Figure 4.
The directory for configuration of a “door system”.
Parameter Name
Description
Door System URL
Specifies the URL of a camera for a VOIP-200/VOIP-500/VOIP-
600 Series IP Call Station equipped with a camera.
The factory values will specify up to thirty (30) VOIP-200/VOIP-
500/VOIP-600 Series IP Call Station cameras in the following
format:
http://
value from 192.168.1.101 through 192.168.1.130
Door System SIP User ID
When used in conjunction with a SIP proxy/registrar, specify the
Directory Number or phone number of each VOIP-200/VOIP-
500/VOIP-600 Series IP Call Station. The value can be specified
as a SIP directory number (DN) with port number.
At the factory, the AVM-1 is configured in peer-to-peer mode.
The factory values will specify up to thirty (30) VOIP-200/VOIP-
500/VOIP-600 Series IP Call Stations in the following format:
192.168.1.1 through 192.168.1.30